El & VVS - sita 264

Outdoor flashlight
The Supfire X30 is a compact headlamp that you can take anywhere with you. It will fit in your pocket, backpack, handbag or even a sachet. The headband allows you to put the flashlight on your head and use it when you need both hands free. In addition, thanks to the ability to adjust the position of the flashlight within 45 degrees, we can adjust the angle of incidence of light to our own needs.

Non-contact switch
The flashlight is equipped with a non-contact switch that allows you to turn on the flashlight by waving your hand in front of the flashlight. This function is especially useful when you have dirty hands or dirty gloves that make it very difficult to press the switch.

Fast charging
The flashlight is powered by one 1200 mAh battery. The battery can be quickly recharged using the micro USB port. You do not need a special charger to charge the flashlight - just plug the micro USB cable into a power bank, charger or computer. During charging, the red light will indicate that the battery is charging, and when the battery is charged, the light will turn green.

Strong light
The USA Cree XPG LED provides powerful light and has a long life span. An additional COB panel provides light with a wide angle of light, perfectly illuminating the nearest area, also allowing to switch on the red light, useful in difficult conditions or emergency situations. The light has a brightness of 340 lumens and its range is 130 meters. The flashlight has 5 modes of illumination. 3 modes are used to control the brightness (strong, medium, weak) and the last two to turn on the red light. The flashlight switch is used to switch between modes.

Attributes of Supfire X30
The advanced design, the ability to set the working angle, and the combination of red and white distinguishes X30 from other outdoor flashlights.

Included:
Headlight
USB Cable

Smart gardinrobot med Bluetooth-motorisering för gardiner på gardinskena, appstyrning, stöd för röstassistent och programmerbar automation.

Nedis SmartLife Curtain Robot BTMC20WT1PC ansluter direkt via Bluetooth och låter dig automatisera befintliga gardiner i Nedis SmartLife-appen, inklusive scheman, soluppgång/solnedgång-tidsstyrning och ett dynamiskt semsterläge med slumpmässig öppning och stängning.

• Stödjer röststyrning med Google Home och Amazon Alexa
• Ställ in tider för öppna/stänga utifrån lokal soluppgång och solnedgång
• Dynamiskt läge öppnar och stänger med slumpmässiga intervall under semestrar
• Kan skjuta gardiner upp till 12 kg
• Inbyggt Li-ion-batteri som laddas via USB-C
• Manuell styrning via funktionsknappar på kontrollenheten
• Snabb gör-det-själv-installation på cirka 30 sekunder utan verktyg

Gör svåråtkomliga gardiner enklare att hantera och lägger till smidiga vardagsrutiner i ditt smarta hem.

Rörelsesensor för fast inomhusinstallation, med passiv infraröd (PIR) detektering med 9 m räckvidd, 160° detekteringsvinkel och justerbar känslighet, timer och ljuskänslighet.

Nedis PIRII42WT är en vit PIR-rörelsesensor utformad för att styra belysning med flexibel 2- eller 3-trådsinstallation och stöd för LED-lampor upp till 500 W och CFL-lampor upp till 200 W.

• Passiv infraröd (PIR) detekteringsläge
• 9 m detekteringsräckvidd
• 160° detekteringsvinkel
• Justerbar detekteringskänslighet
• Justerbar timer
• Justerbar ljuskänslighet
• Kompatibel med LED-lampor upp till 500 W och CFL-lampor upp till 200 W

Tillförlitlig rörelseaktiverad styrning hjälper till att automatisera inomhusbelysning baserat på rörelse och omgivande ljus.

Air screw with thumb screw, self-sealing. Fits 1/2" RG. Material: Nickel-plated brass.

ALTECH C4-Compact radiator is the modern interpretation of the classic panel radiator, where gables and top grill are mounted for an aesthetic and compact appearance. ALTECH C4 gives any home a stylish and attractive look.

ALTECH C4-Compact radiator is the modern interpretation of the classic panel radiator, where gables and top grill are mounted for an aesthetic and compact appearance. ALTECH C4 gives any home a stylish and attractive look.

Radiator PURMO 600x1200mm C33 white

Radiator PURMO 900x700mm C33 white

Radiator PURMO 400x800mm with built-in valve on the right

Radiator PURMO 300x2300mm C22 white

Radiator PURMO 900x800mm with built-in valve CV22

Radiator PURMO 600x1000mm flat front

Radiator PURMO 900x500mm flat front

Radiator PURMO 200x1800mm with built-in valve on the right

The Avatto ZTS02-EU-B2 touch switch is perfect for your smart home. It allows you to conveniently switch the light on and off and, thanks to its compatibility with the TUYA / Smart Life app, allows you to control the lighting from a distance. You can also control the device with the voice assistants Amazon Alexa and Google Assistant. The switch is also distinguished by its water resistance and sleek, minimalist design. The product is equipped with 2 buttons and supports the ZigBee 3.0 communication protocol - an additional ZigBee hub (not included) is required for proper operation.

Current Transformer that can be used with Shelly EM and Pro EM 50 for single-phase energy measurement and with Shelly Pro 3EM for three-phase energy measurement. Shelly EM and Pro 3EM measure power, voltage, current, and power factor.The current transformer is available in different sizes:

• Shelly 50A current transformer for Shelly Pro 3EM: 3800235266632
• Shelly 120A current transformer for Shelly Pro 3EM: 3800235266410
• Shelly 400A current transformer for Shelly Pro 3EM: 3800235266496

Pedal bin with soft open/close lid, non-slip rubber ring at the bottom and specially designed pedal to ensure stability during use. The lid design prevents it from hitting the wall when opened. Removable insert with double-sided tape makes it easy to fit binbags inside. The bin’s mechanical parts are all on the inside, facilitating easy cleaning. A roll of binbags included. Volume 4 l.

10-mm tempered glass.The surface is treated with GEWE-clean® nanotechnology, so that the shower screen can be right- or left-aligned.No visible screws and fittings in the finished result.The solution fits tile thicknesses up to 15 mm for wall tiles and up to 20 mm for floor tiles.

10-mm tempered glass.The surface is treated with GEWE-clean® nanotechnology, so that the shower screen can be right- or left-aligned.No visible screws and fittings in the finished result.The solution fits tile thicknesses up to 15 mm for wall tiles and up to 20 mm for floor tiles.

To finish the shower screen.A top rail is recommended to stabilise shower screens measuring 1200 mm.The top rail is available in one length. Cut to fit the individual shower cubicle.

The shower door is adapted to the height and width of the Unidrain GlassLine shower screen.Must be combined with a Unidrain top rail (p. 91). Tile thickness including tile mortar: 8-12 mm.The surface is treated with GEWE-clean® nanotechnology on the interior side of the glass.Supplied with 2 hinges and sealing strip.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.