Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

Danfoss ECL Comfort A230 application key. Weather compensated or constant flow temperature control of heating systems with sliding return temperature limitation and with / without wind compensation. Weather compensated or constant flow temperature contr

Contact house 031E0291 Product description: Accessories and spare parts Technical specifications: Type: 3-pole contact system Application: CS

Danfoss 087H3230 rörmokeritillbehör

Danfoss 087B1164 rörmokeritillbehör

Wireless actuator for radiator valve with 30mm nut and adapter for RA valve for Salus iT600 heating system

Danfoss AMV 150 actuator. AMV 150 is an actuator for three point control for use in district heating systems. The actuator is available for the Danfoss ECL Comfort controllers or any other three point controls.

24 V Wiring Centre for iT600 Underfloor Heating system

Salus 230 NC actuator for underfloor heating with 30mm nut, can be used for any 230V underfloor heating systems.

Danfoss AMV 10 actuator. AMV 10/13 are actuators for three point control and AME 10/13 are actuators for modulating control, furthermore AMV(E) 13 actuators have safety function. The spring return actuators can be used to provide safety shut off on power

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The inlet- and return- connection is 1 "thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control. Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 "for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Danfoss ECL Comfort 310 regulator 230V. The ECL Comfort 310 is an electronic weather compensated temperature controller for use in district heating, central heating and cooling systems. Combined with the intelligent ECL application keys, the controller

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 , and connection to water for the heat supply is 3/4 socket, and threads to the actuator are 30 x 1.5 mm.

Danfoss 087H3800 rörmokeritillbehör

Danfoss RAVI Thermostatic actuator. Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders - either storage type cylinders or instantaneous hot water heaters. The controller closes on rising temperature.

Danfoss 013G5081 rörmokeritillbehör

Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 , and connection to water for the heat supply is 3/4 socket, and threads to the actuator are 30 x 1.5 mm.

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. The inlet- and return- connection is 1 "thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control. Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 "for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

Permanent Magnetic coil 018F0091 from DANFOSS A/S

AB024D Coil 24V DC 5 W 9mm IP00The coil only fits the valve system A with a 9 mm actuator system