Pannor och skorstenar

Smoke pipe straight 5 pieces of length 250mm.

Used for all flashings. The included silicone ensures a weather-resistant installation.

• Material: DD12., zinc plated.• Cubex R expansion vessels have to be installed with the system connector facing downwards.• Connection to the clench ring of the vessel.• Connection of the vessel to the mounting bracket by one M 8 x 45 bolt.

CONLIFT1Conlift1ApplicationsThe Conlift1 is suitable for the pumping of condensatewhich is collected below sewer level or which cannotflow to the sewage system or drain of the building bymeans of a natural downward slope.Typical applications:• Condensate boilers. A 200 kW boiler can be drainedup to 5 m duty point.• For condensate with a pH value above 2.5.• For condensate from air-conditioning systems,cooling and refrigeration systems, air dehumidifiersand evaporators.• For condensate with a pH value below 2.5, useConlift2 pH+.Features• Fully sealed against moisture and evaporation.• Quick and easy installation.• Very silent and smooth operation.• Can be mounted on the floor or on a wall.• Pre-assembled non-return valve.• Pump operation test button.• Incorporates high-water float switch.• Fully automatic operation.• Inlet and discharge hose connectors included.Liquid:Maximum liquid temperature:50° °CTechnical:Curve tolerance:ISO 9906:2012 Grade 3BInstallation:Pump inlet:18-30Pump outlet:8-10Electrical data:Power input - P1:75 WRated voltage:1 x 230 VRated current:0.65 AEnclosure class (IEC 34-5):IP24Insulation class (IEC 85):FLength of cable:1.7 mType of cable plug:SCHUKOTank:Total volume of tank(s):2.65 lOthers:Net weight:4.1 kg

Made in black SBR rubber.

Smoke pipe straight 6 pieces of 150mm length.

CLEANING CLOTH 130MM

• Maximum working pressure: 6.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

Hot Water tank 63 liter 51W.Energy mark C.

ESBE draught regulator ATA212 35-95°C G3/4The series ATA200 is a control device for regulating the temperature of solid fuel boilers. The thermostatic control head senses the temperature and through a lever and chain adjusts the position of the air vent, thereby regulating the combustion air supply to the boiler. The draught regulator is fully adjustable within the ranges of 35-95°C and 60-95°C. The draught regulator is connected directly to the boiler waterway through a threaded immersion pocket.

150 liter hot water tank with energy label C. The tank can be mounted either standing or hanging. It is made of enamelled steel and equipped with a magnesium anode. Remember to buy a tank sensor.

Laddomat charging unit for solid fuel boilers up to 80 kW

Laddomat charging unit for solid fuel boilers up to 30 kW

• Maximum working pressure: 6.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

Laddomat thermostat cartridge 63°C

Insulation for puffer tank PS300EPS insulating mantle: fire category B1 according to DIN 4102.Thermal conductivity = 0.032 W/(m.K) according to DIN EN 12667.

Laddomat Thermostat cartridge 53°C

• Maximum working pressure: 3.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

ESBE load valve VTC511 25-9 RP1 60°CThe series VTC500 is a thermic valve used for solid fuel boilers up to 150 kW. The load valve makes sure that the boiler gets up to a high combustion temperature so as to ensure the lowest possible emissions. Above all, the valves make sure that the return temperature to the boiler is kept high and guaranteed over the entire combustion cycle which enables a higher level of boiler efficiency, reduced tarring and increased life span of the boiler

ESBE rotary mixing valve VRG131 25-10 RP 1Series VRG130 are 3-way valves suitable for mixing or diverting operation. The valves are made of high-performing brass allowing use in heating and cooling installations. The VRG series is available in DN15-50 and comes with different types of connections to suit most pipe dimensions. The valve is perfectly combined with ESBE actuators and controllers.

• Maximum working pressure: 3.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

Pipes 1000 mm

• Suitable for addition of glycol-based anti-freeze up to 50%.• With two safety valves

EXHAUST CONNEXT 80/125MM EXHAUST STOP BLACK

DN80/125 Chimney flue system, C93x