Brickor, busskärror och fästen

Thorsman - Outlet box MIB-A1 CEE for TEK

Performa - vertical/suspended/floor bracket - pre-galvanized - 235 mm

T-bolt 26U M8x30 Hdg - To be used for the mounting of Cantilever arm 50 on Pendant/Fixing rail 24/48 and all vertical pieces except Vertical piece 2.

FLAT ANGLE 90° - FOR LEGRAND DLP 50X105 SNAP-ON TRUNKING - WHITE

Cable carrier for flatform cables with patented nut., type ws 1 f/ 85G, max thickness of individual cable mm:8.max. clamping capacity mm height x width: 17x 65.

Wibe - cable roller S

Heavy cable protectors with centre holes, there simplyfies the installation significantly. Every details of the cable protectors, has a surface treatment with Magnelis, which has a superior corrosivity protection, fitting the nordic clima, even in marine enviroments. It has a unique ability to self healing in drilled holes, weld seams and cut surfaces, smoother and finere surface structure, and last but not least, a markedly minor impact on the environment

Aluminum Profile 10, with opal cover - 2500 mm long, 17,1 mm wide and 15,3 mm. Suitable for mounting and cooling of the LED Profile 8 (LM27108) is a lower profile of the same width.

Canalis - tap-off for 4P modular device - 32 A - pre-wired - 5 modules of 18 mm

Wibe - take-off hook 4 - aluminium

Front lid/cover for cabel trunking with special cut out for outlets

Wibe - cantilever arm 50i-300 - steel pre-galvanized

Wibe - support bracket 3-400 - steel hot-dip galvanized

BIS FIXING UNDER FLANGES WITHOUT WELDING OR DRILLINGFOR BEAMS OF 4-7MMFOR CABLES OF 19-24MM

Cover for one module CLIC'LINE pearl white 1SC/BRH132 PH halogen free

End cap halogen free for installation duct LFH 60090 pearl white

Frame BRN PW for CLICLINE double2RC-BRN pearl white for wall duct BRN

Wibe - cantilever arm 50i-200 - steel pre-galvanized

Performa - support for box + bracket - pre-galvanized - 72 mm x 92 mm x 20 mm

Profile clamp to be used for installations where the cable ladder is to be fixed to cantilever arms, support brackets, etc. Screw M8 and nut included

Wibe - angle bracket 5L - steel hot-dip galvanised

Wibe - vertical riser 18-600 - steel hot-dip galvanized

Console clamp Zinc + HxD = 23.5x23.5 /

Assembly fittings U-35 Zinc + HxWxD = 32x-x80 incl. Assembly fittings, bolt and nut /

T-bolt 26U M10x30 Hdg - To be used for the mounting of Cantilever arm 50 on Pendant/Fixing rail 24/48 and all vertical pieces except Vertical piece 2.