Dimmers & Kontroll

· Dimming of all dimmable light sources - also LED lamps· Only 17.5 mm· 5-350 W· All-off function· Suitable for use in houses with intelligent systems· Max. 10 lamps 10-330-00

Noise capacitor for minimizing creepage current in e.g. LED bulbs mounted on dimmers.

LED Rotating Dimmer of 200 W from Hilux, which works superbly for all LED light sources in all castings. The front of the dimmer is available in different colours, so you can choose exactly the color that best suits your home. The LED Dreje Dimmer from Hilux fits in the LK Fuga. all color fronts are included in the package.

SIMPLE: connection without neutral, flush-mounted model requires no connections back to the electric panel for pushbuttons or lamps, 100% quiet operation, Soft start/stop feature preserves the life of your light bulbs

Dimmer for mounting on the board or in the electric box over the ceiling• Load from 3-400VA.• Possibility of setting minimum level.• Can be connected with switch with KIP function.

The LEDDim Smart Pill Mini is a damper that can be installed in the device / connector box or the like to control one or more luminaires. The dimmer is controlled with Bluetooth from the app, Smart Switch or springy pushbutton.

The wireless switch is based on the Zigbee protocol. The switch has 4 keys which can be programmed individually. The switch is adapted to the Danish circuit breaker system which means it can be included in the same framework as traditional switches and sockets. The switch does not contain batteries and is therefore maintained-free. When the switch is activated, power is automatically generated so that the pressure is able to send Zigbee telegrams. The switch has been tested to last for 100,000 activations. The pressure is b.la. compatible with Interactiv, Lsense and other EasyAir concepts, and is configured through the associated App.

Wireless and wired electronic dimmer for installation with soft start / soft stop, phase controlled, ohmic load max 2A in ventilated box and max 300w in smaller sealed box / can, Max. load for dimmable LED 1A (see data sheet for dimming LED), 230VAC (+ 10% -15%) 50Hz, temperature environment -20 - +40 , dimensions 37mm x 35mm x 12mm, electronic protection.

709/5000LEDDim Smart DIN is a digital CR Phase attenuator for DIN-rail mounting to be able to regulate the connected luminaires via 230V or 24V push so that it can be used in connection with low-current installations such as IHC, in addition App control via SG SMART App.The switch connects to the panel board and the Din rail damper and thereby regulates the connected luminaires, where a short tilt pressure turns on and off and a long tilt pressure regulates the light up and down.The external antenna ensures a good range, but it is recommended to use the LEDDim Smart DIN in combination with the SMART Gateway. Pairing with the App is via the SMART App, and it is also possible to set the minimum level via manual +/- on the dimmer or via the App.

• Approved for installation directly in the insulation and flammable materials
• Can be included as part of the permanent installation (2G1.5)
• Helps the problems with the dimming, such as flickering, blinking or in the situations when LED-lighting does not turn off 100% by switching
• For mounting on the primary side (220-240VAC), in parallel with the LED downlight or LED driver

LEDDim SMART allows you to control the light using your smartphone or tablet and our self-developed app - without the use of Gateway. The dimmer has a built-in Bluetooth device that communicates with your smartphone and other LEDDim SMART dimmers. All LEDDim SMART dimmer in your installation are connected to your own network, which provides a long range. Of course, the dimmer can also be operated manually, independent of the smartphone. Adapters for ELKO, Schneider and ABB frames are included. Underlay and design frames in silver or black are ordered separately.

Smart Pill On / Off Micro are potential-free relays that can be installed in a wall box or similar closed installation to turn on or off one or more appliances such as electric radiators, garage door motors, etc. The unit can be controlled with Bluetooth via app, Smart switch or push switch . You can use them as a relay to select either On / Off, or you can select pulse mode, to give pulse to ex. a motor for a garage door.

This dimmer is suitable for dimming LED strips and LED lamps. An app controlled device that is attenuated using ZigBee HUB e.g. Philips Hue.Philips Hue convertible.

The LEDDim Smart Pill Mini is a damper that can be installed in the device / connector box or the like to control one or more luminaires. The dimmer is controlled with Bluetooth from the app, Smart Switch or springy pushbutton.

SIMPLE: connection without neutral, flush-mounted model requires no connections back to the electric panel for pushbuttons or lamps, 100% quiet operation, Soft start/stop feature preserves the life of your light bulbs

Smart Pill On / Off are potential-free relays that can be installed in a wall box or similar closed installation to turn on or off one or more appliances such as electric radiators, garage door motors, etc. The unit can be controlled with Bluetooth via app, Smart switch or push switch . You can use them as a relay to select either On / Off, or you can select pulse mode, to give pulse to ex. a motor for a garage door.

· Dimming of all dimmable lamps - also LED· Only 17.5 · 5-350 W· Max. 10 lamps 10

The wireless switch is based on the Bluetooth protocol. The Switch has 4 keys which can be programmed individually. The switch is adapted to the Danish circuit breaker system which means it can be included in the same frame as traditional switches and sockets. The switch does not contain batteries and is therefore maintained-free. When the switch is activated, power is automatically generated so that the pressure is able to send Bluetooth telegrams. The pressure has been tested to last for 100,000 activations. The switch is compatible with the Casambi and Tridonic BasicDim concepts, and is configured via the Associated App.

SOUND DAMPER PMU-10 H 1-10 V, white

Wireless Battery Transmitter for Built-In with 2 Separate Channels, Used to Send to Yoki's Wireless Receivers: MTV500ER, MTR2000ERP and MVR500ERP.Range up to 250m in free air, range will be reduced by wick, metal and other building parts.Number of receivers per channel is 4 pcs. in direct mode and in radio bus it is unlimited. Battery CR2032.Operating temperature -10 ° C - + 50 ° C.B battery CR2032.The compact built-in transmitters can easily be integrated into the existing installation.

Smart Gateway is not required for a SG SMART installation to work. The Smart Gateway offers a number of additional benefits that are almost indispensable. Smart Gateway installation takes place almost automatically as it just needs to be connected via Ethernet cable to the internet router, it also automatically pops up in the SG SMART App the next time it opens - Plug & PlayExtra benefitsWifi communication ensures fast commands and always on5 programmable Astro watches that are easily set via the SMART AppVoice control and integration with other systems via Siri, Apple HomeKit / Google Home and Amazon AlexaExternal control of all SMART devices in multiple locationsNotifications that can tell you if the light is switched on when you are not at home. Geotagging via Apple HomeKit or Goggle Home.Gateway is always recommended in combination with LEDDim Smart DIN - but of course also in connection with other products. It is only necessary to have 1 Gateway per location