Instrument

Elma ACT612 is a new smart battery tester for easy and fasty test of the capacity in 6 & 12V closed lead acid batteries, GEL batteries and car batteries. The instrument makes a 20 hour capacity test in 20 seconds, with display of the battery voltage and the battery capacity directly in Ah. The instrument is able to perform test continuesly without any rest periods to cool down. The instrument is usefull for e.g. cars, motor bikes, alarm systems, UPS systems, telephone communication equipment, tools and more. It is recommended that you normally recharges or change the battery when the capacity is below 65 %. a volt meter is only able to measure the voltage, not the capacity in the battery. This new battery tester is solving this problem by testing both the voltage and the capacity in few seconds. The resultats is displayed on the build-in LCD display. The tester is warning if the poles are not correct mounted on the test leads. Elma ACT612 gets power from the battery and is automatically testing on 6 & 12 V maintenance free/closed lead batteries, GEL batteries and car batteries from 1,2Ah to 100Ah. Is delivered incl. a bag and manual.

FNIRSI 2C53T is a multifunctional portable device that combines a digital oscilloscope, multimeter, and signal generator in one compact housing. The dual-channel 50 MHz oscilloscope with 250 MSa/s sampling rate ensures precise waveform analysis, while the built-in multimeter supports a wide range of electrical measurements up to 19999 counts. A 2.8-inch color display, advanced trigger modes, and a rugged ABS housing make the device suitable for workshop, laboratory, and field diagnostics. The integrated 50 kHz signal generator and rechargeable 3000 mAh battery further enhance its versatility for electronics testing and troubleshooting.

Zircon HD70 Stud and Steel Rule Finder Product Description: Zircon HD70 OneStep® is a smart and practical tool for quickly locating wooden and metal studs. The stud finder has a display that indicates signal strength and the location of the instrument in relation to the stud. As something completely new, the tester lights up red precisely when the center of the stud is found. When dangerous AC voltage is detected, the instrument warns with a clear sign in the display. The instrument comes with an operating manual.

Technical specifications:

• HxWxD (mm): 180x74x34
• Weight (grams): 159
• Battery type: 9V 6F22 (not included).

The Ancel BM200 is an innovative Bluetooth car battery tester that allows users to easily track battery health by connecting to a mobile app on iOS and Android devices. Equipped with Bluetooth 4.0, the BM200 provides a reliable and fast connection, allowing the user to access detailed battery diagnostic data.

The Leica DISTOTM D110 is world’s smallest laser distance meter with integrated Bluetooth® Smart technology. By using its precise measurements users can create floor plans and sketch easily by connecting it with the Leica DISTOTM sketch app on a smartphone or a tablet. Whether an interior designer, painter or building contractor, the Leica DISTOTM D110 will make it easier to get the job done right.Distance and area measuringBluetooth® SmartIP 54 dust and splash water protectionRemovable pocket clip

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

FNIRSI GC-01 strålningsdetektor

Elma Volt Test Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma Volt Test Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma Volt Test Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards. Technical data: Voltage range: 12-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 146x 18 mm Weight: 40 grams

The Ancel AD310/AC103 scanner is an advanced diagnostic tool that allows you to quickly and efficiently identify technical problems in your vehicles. It is ideal for drivers who want to monitor the technical condition of their car on their own, as well as for professionals looking for reliable equipment for everyday work.

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

FNIRSI SG-003A is a compact portable signal generator designed for precise testing, calibration, and diagnostic tasks in industrial and field environments. It offers measurement accuracy of ≤0.2% and delivers near-instant readings in approximately one second, supporting efficient workflow during troubleshooting. The device features a 2.4-inch HD display with adjustable brightness, ensuring clear visibility in different lighting conditions, while color-coded operating modes improve usability. Weighing only 165 g and measuring 112 × 82 × 27 mm, it is highly portable for toolkits or field use. It supports multiple signal modes, including current and voltage testing, actuator control, speed simulation, and inverter diagnostics, with real-time curve monitoring for signal analysis.

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

Elma DT-128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures the moist 20-40mm n the material. Just hold the ball-tip against the surface and the moist is immediately shown in the large, backlit display. Elma DT-128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use incl batteries and manual. Note: The material to be measured should be at least 20-40mm (depending on the material) to provide a reading.

The FNIRSI S1 is a digital multimeter designed for accurate and versatile electrical measurements in both professional and DIY environments. It supports AC/DC voltage measurement, resistance, continuity testing, frequency detection, battery capacity measurement and temperature reading. Additional functions include NCV (non-contact voltage detection), diode testing, phase and neutral wire identification and True RMS measurement for more accurate readings of non-linear signals. The device features a clear inverted VA HD display for easy readability, along with automatic range selection, data hold and overload protection. A built-in 1000 mAh rechargeable battery with USB-C charging ensures convenient and portable operation.

With this smart magnetical probe, the test lead automatically will be fixed on the measuring point, without any help from tools etc. Fits into a 4mm banana plug. Complies with IEC 61010-1 CAT III 600V. Technical data: Current: Max 2A Diameter: Ø6,6mm. IEC61010: Cat IV 600V, Cat III 1000V

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

Replacement testleads for T5

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Elma 106 indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Technical data: Voltage range: 100-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 144x17 mm Weight: 50 grams

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Diazed sikring DZ II 25A, 5 stk

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.

MultiScanner HD900c OneStep multifunction stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.

Smoke pen including 6 pieces of smoke sticks. Burn time: 30min/stick

FNIRSI DPS150 is a compact programmable laboratory power supply designed for precise voltage and current control in electronics testing, servicing, and educational applications. The device features a 2.8-inch IPS color display, low-noise output below 20 mV ripple, and support for multiple power sources including DC input, USB-C Power Delivery, and Quick Charge. Advanced safety protections, preset memory profiles, and stable digital regulation make it suitable for powering sensitive circuits, microcontrollers, audio systems, and laboratory projects. Its portable aluminum housing and efficient cooling system ensure reliable operation during extended use in both workshop and field environments.