El & VVS - sita 400

For building drainage

Geberit electrofusion tape for anchor point: D=50 mm, D1=58 mm.

For building drainage, For site drainage

Geberit Mepla T-piece, equal: d=32mm

For sanitary facilities and industry, for heating systems, cooling and industry.

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

For sanitary facilities and industry, for heating systems, cooling and industry.

High-performing and flexible compression coupling for PEX pipes in heating, cooling and tap water systems. Available in a comprehensive Dy range of 12-63 mm – enabling faster installation – as well as a wide range of sizes

Isiflo coupling system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE- and PVC pipes. Can be used on pipes for cold water, max 40°. ISIFLO is made in CR brass.

Isiflo coupling system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE- and PVC pipes. Can be used on pipes for cold water, max 40°. ISIFLO is made in CR brass.

Isiflo coupling system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE- and PVC pipes. Can be used on pipes for cold water, max 40°. ISIFLO is made in CR brass.

Isiflo coupling system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE- and PVC pipes. Can be used on pipes for cold water, max 40°. ISIFLO is made in CR brass.

Isiflo SPRINT system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE-pipes. Can be used on pipes for cold water, max 40°. ISIFLO SPRINT is made in composite material.

HENCO 26X20 mm VISION push reduced coupling for water, heating- and cooling installations, max. 16 bar

Isiflo coupling system / pipe entry system for plastic pipes gives a tight and end-load resistant connection and can be used on all types of PE- and PVC pipes. Can be used on pipes for cold water, max 40°. ISIFLO is made in CR brass.

Henco 16 mm x 12 PVDF press elbow 90° for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 32 mm PVDF press elbow 90° for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 34 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

HENCO VISION brass nipple adapter 26 x 3/4 to distribution pipes for water, heating and cooling installations Max. 16 bar

Chromium plated

Chromium plated

Fits to A-Model

Hansgrohe 14095000 vattenkransdel

Headpart 1/2" ceramic

Reducer4 Outlet Adaptor F Rapid Sl