Alu pex-system

Press adapter made of corrosion-resistant material. Press cap of stainless steel. Developed for domestic water and radiator systems.- Stop ring, pressure indicator, color code, guaranteed leak if not pressed.- No deburring and calibration.- Cylindrical internal thread according to EN 10226-1 for gasket.May only be used with Uponor MLC, Uni Pipe PLUS and Metallic Pipe PLUS pipes and with Uponor approved pressing tools.

Uponor 1070549 rörmokeritillbehör Kompressionskoppling

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free. Cylindrical external thread according to EN 10226-1 for packing.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Uponor 1070509 rörmokeritillbehör Kranadapter

Henco 26 x 26 mm PVDF press straight coupling for water-, heating- and cooling installations. Max. 16 bar.

Uponor 1070508 rörmokeritillbehör Kranadapter

Geberit Mepla connection nipple for manifold, for Euro cone: d=20mm, G=3/4

Geberit Mepla adapter with male thread: d=20mm, R=3/4

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1

Presvinkel PPSU Uponor 90° 20 mm

HENCO 20X20X20 mm VISION push Tee for water, heating- and cooling installations, max. 16 bar

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 40, d2: 32

Henco 40 mm x 1 PVDF press straight male adapter for water-, heating- and cooling installations. Max. 16 bar.

PPSU coupling Uponor 25X20 mm

Uponor 1046902 rörmokeritillbehör Kranadapter

Uponor 1070523 rörmokeritillbehör Armbåge

Uponor 1032896 rörmokeritillbehör Kranadapter

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Uponor 1046908 rörmokeritillbehör Armbåge

Used with Roth alu-laserplus pipe and Roth tools

Press coupling Uponor with gasket sleeve/sleeve 16X3/4

Uponor 1070540 rörmokeritillbehör Armbåge

Uponor 1029143 rörmokeritillbehör Kranadapter

Geberit Mepla adapter with male thread: d=32mm, R=1 1/4

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 16, Rp: 12, d2: 16