Förare, Spolar & Transformatorer

Electronic LED transformer 0-70W

• LED drivers for mini downlights (350mA), 6 outputs
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

LED-drivdon HiluX D1 Gen3 är ett dimbart drivdon för 1-4 spotar från HiluX.

Detta kompakta LED-drivdon är avsett för spotbelysningsinstallationer där dimningsfunktion krävs.

Ett praktiskt val för att installera eller ersätta ett dimbart LED-spotdrivdon med HiluX D1 Gen3-kompatibilitet.

Snappy LED power supply, 15W, 12Vdc, Ip20Super slim LED driver.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Snappy LED power supply, 30W, 24Vdc and IP20Super slim LED driver.

DRIVRUTIN 30W DIM. MED MONTERINGSBOX OCH PLUGG

Product features • Line frequency: 50...60 Hz • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 • Safety: to EN 61347 • Electrical isolation between the primary side and the secondary side • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Switching between electronic transformer and lamp not permitted Product benefits • Dimmable on the leading edge and trailing edge • Very low power loss thanks to high efficiency • Strain relief suitable for different cable types (HTM) • Suitable for space-critical installation thanks to compact functional design • Extremely compact transformer for highly space-critical installation conditions (HTN) • Protective operation throughout the entire partial-load range for long lamp life Areas of application • Effect and accent lighting • Living rooms • Object lighting • Conference rooms • Restaurants • Recessed and surface-mounted furniture fixtures • Shop lighting • Event rooms

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

LED driver, 20 Watt, 1670 mA

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

High quality and robust performanceHigh-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lampsProduct Features • Minimal lamp power spread • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • CDM lamp life increased by up to 30% • Eliminates all visible lamp flickerApplications • Accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

Dimmable Snappy LED Power Supply, 75W, 24Vdc and IP20.LED power supply that can be attenuated with a standard front edge or rear edge dimmer.

Product features • Energy Efficiency Index EEI: A2 • Supply voltage: 220...240 V • Line frequency: 50...60 Hz • RI suppression: to EN 55015/CISPR 15 • Safety: to EN 61347-2-12 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Extended terminal section enables mains looping • Screw-down cable clamps for reliable strain relief • Long reliable life at maximum permitted temperatures • Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL) Areas of application • Shop lighting • Health and fitness areas • Effect and accent lighting Equipment / Accessories • Precabled versions available on request

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Snappy LED power supply, 320W, 24Vdc and IP20.LED driver.

- 75 W constant voltage LED driver- 12 V constant voltage output- Lifetime (h): 30,000- Voltage range (V): 198–264- Max temperature at Tc point (°C): 85- Ambient temperature range: –15 °C .. +45 °C- IP rating: IP20- Lifetime (h): 30,000 (see more details in datasheet)

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

Philips 913700648666 övrigt

Product benefits: Long lamp lifeNo adverse effect from frequent on/off switchingAutomatic restart after lamp replacementPerfect lamp start for applications with motion sensorsVDE/VDE EMC certified systemVery high energy efficiency due to cut-off technologyAreas of application: Open-plan offices, corridors and storage roomsPublic buildingsStrip lightingSuitable for emergency lighting (DC operation)Suitable for luminaires of protection class I

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours