El & VVS - sita 203

The small FESH SMART Gas Alarm warns you in time against gas leaks. FESH SMART Gas alarm is connected to 230V via the supplied plug-in adapter or directly to 12V (camping/boat). It simply needs to be connected to your Wi-Fi and connected to the FESH app and you will receive an immediate notification on your phone if the alarm goes off. FESH SMART Gas alarm reacts to natural gas, town gas (methane) and bottled gases (butane and propane), and therefore gives you extra security regardless of where you are.

Main features:

• Used in homes, caravans and boats
• Reacts to natural gas, household gas and liquid gas
• Wi-Fi gas alarm provides optimal security
• Get notifications on your FESH app
• Supplied complete with plug-in adapter, mounting bracket and screws
• Complies with EN50194

Damp-proof luminaire for T8 LED tubes with tool-free luminaire connector. The luminaire housing is available for 1 or 2 T8 LED tubes. Suitable for T8 EM and T8 CONNECTED LED tubes. Protection class: IP65. Integrated electrical fuse.

Product benefits:

Quick and easy installation
Pre-wired for easy installation of LED tubes AC
Tool-free installation
Robust fixture housing
5 year warranty
Areas of application:

Parking spaces
Save
Production areas
Car parks and pedestrian tunnels
Workshops
Equipment/accessories:

All necessary accessories are included
Through-wiring kit (accessory)
Technical specifications:

Width (mm): 65
Height (mm): 70
Frequency (Hz): 50...60 Hz
Luminaire housing, material: Polycarbonate (PC)

Duschdraperi från Gedy med fyrkantigt mönster. Detta duschdraperi är tillverkat av 100% polyester, vilket gör det slitstarkt och hållbart.

Heat conduct compound

CorePro LEDbulbs are compatible with existing fixtureswith an E27 or B22 holder and are designed for retrofitreplacement of incandescent bulbs. They deliver hugeenergy savings and minimize maintenance cost.

The small junction box is with 8 inputs and outputs, including 4 for relief. Suitable for all types of cables / wires / pipes from Ø 2mm. to 16 mm.Form the base on the side of the can. Input / Output lid. Und / output base.White

DE 9326- 1.5-2.5 mm2, Cu 3~- with terminals- 5-pole per pole 6 x 1.5 mm2 sol, 4 x 2.5 mm2 sol, 3 x 4 mm2 sol- 10 elastic membranes, closed cable entries, sealing range Ø 6.5-16 mm- colour: white, RAL 9016- for normal environment and protected outdoor

2A, 250V, Ø27x53 mm. thermoplastic, T190.

Vandal resistant outdoor E27 wall fixture in nice design, an ideal solution for apartment blocks, terraced houses etc.IK 10 vandal class and shade in impact-resistant UV stabilized polycarbonate.IP65 and approved for public access.Standard E27 socket.Housing made of corrosion protected aluminum.Mounting:Backboard eroded with double input / output back put option to come with cables from the side.Output Cable Simply hit in the rear frame of the installation will be completely invisible.Terminals for quick snap-in installation and with additional loop terminals.

Product: PD4-S-GH-P (92265) Presence detector LUXOMAT® PD4-S- GH, Slave with oval detection range and the range for mounting in fixed ceiling or PL dåse.Stort savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. No setting items on the Slave. Sensor and præstationsdel in a cabinet. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° .Rækkevidde (approximately) im - across Ø 44.00 m. Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high quality Slave output Slave device: 230 V. Power consumption:> 0.5W.

Product: PD2-S-P (92152) Presence Sensor LUXOMAT® PD2-S, Slave with 360 degree field of detection for recessed ceiling. Large energy savings potential. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves. The pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness No setting items on the Slave sensor and præstationsdel in a cabinet Application examples: meeting rooms, class rooms, single offices, garages Mains: 230 V ~ ± 10% Detection range: 360 ° Range (around) m: - sitting Ø 4 00 m - across Ø 10.00 m - head Ø 6.00 m Protection: IP20 / Class II / CE Dimensions: Ø 80 x H 84.5 mm Ambient temperature: -25 ° C to + 50 ° C Cabinet: of UV-resistant polycarbonate high quality Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W.

enclosed case switch-disconnector Vario VBF - 3 poles - 16 A

green complete pilot light Ø22 plain lens with integral LED 230...240V

The Leviton 19" Snap-in-Jack Patch Panel that accommodates 24 ports within a 1U configuration and provides coloured inserts for individual port/service identificationThe product is designed and supplied with a detachable rear cable manager and comes complete with black inserts with integrated dust cover already loaded into the panel as standard. Optional coloured inserts are available for purchase separately in a variety of colours allowing for individual port/service identification.PRODUCT CHARACTERISTICSPackaging: Panel and cable manager packaged together in cardboard box, panel are populated with black inserts qty 24, additional coloured insert requirements packaged separately in bags containing 8 of each colour, minimum orderquantity 10 bags.Applications:Equipment Rack / CabinetsInstallation: Suitable for approved Leviton Snap-in-Jacks (see compatible System Products below)MECHANICAL SPECIFICATIONS Dimensions: 24 port 1U 483mm x 44.5mm x 124mm (WxHxD) Colour: RAL9005 Black COMPATIBLE SYSTEM PRODUCTS (Not included) Atlas Jacks - STP & UTP - Cat6a, Ca7eXtreme Jacks - UTP - Cat6a, Ca6GigaMax Jacks - UTP - Cat5EAC6JAKS000 - 10GPlus Shielded Snap-in-Jack – Tool-Free AC6JAKU002 - 10GPlus Unshielded Jack – Tool-Free C6CJAKS000 - Cat6Plus Shielded Snap-in-Jack – Tool-Free C6CJAKU002 - Cat6Plus Unshielded Snap-in-Jack – Tool-Free GPCJAKU002 - GigaPlus Unshielded Snap-in-Jack – Tool-Free

Coil for soleniod valve

red complete pilot light Ø22 plain lens with integral LED 24V

Consumer Unit 12 modules with transparent door, IP65. Colour RAL 7035 Grå

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEKTM LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.Resources:VCHEKTM LoZ low impedance measurement function to simultaneously test for voltage or continuityTrue RMS for accurate AC measurements on non-linear loadsA large backlit display allows for easy visibility in low-lit areasRecord signal fluctuations using the Min/Max functionDiode test for testing general-purpose germanium, silicon, and power diodesIntegral holster with probe holders for easy storageAuto and Manual ranging for added user functionalityMeets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safetyThe optional TPAK magnetic hanger allows the user hands-free flexibility

Mobile product for hydronic balancing of radiators in combination with an ALPHA3 pump and a smart phone with the “Go Balance"-app installed, which is available for iOS and Android devices.For temporarily mounting on the ALPHA3 pu

Philips LED-ljuskälla sprider ett vackert och extra varmt ljus, har otroligt lång livslängd och är energisparande. Med sin eldslågefärgade färgtemperatur är den det perfekta valet för en mysig atmosfär.

Wago 221-613 ändhylsor 41 A

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

AVK POM service connection valve with tensile socket ends

Laufen shelf made from sanitary ceramic. White, length 600mm, width 135mm, height 65mm.

Siemens 3-Phasen-Einspeiseklemme 3RV2925-5AB für 3-Phasen-Sammelschiene