El & VVS - sita 155

LED-glödlampa med filament, form: glob, glaserad finish, E27, 11 W (motsvarande 100 W), klass D, svalt vitt ljus, 4000 K

Inbyggd köksfläkt Thermex TFM 180 80 cm med motor kombinerar en minimalistisk design i rostfritt stål, skåpsinstallation, 4 hastigheter, en LED-ljuslist framtill och en effektiv Eco-motor med låg ljudnivå.

Utformad för att döljas i ett överskåp erbjuder denna Thermex-fläkt soft touch-manövrering för styrning av motor och ljus, med luftflöde från 220 till 490 m3/h och ljudnivåer från 40 till 63 dB(A).

• Material i rostfritt stål
• Soft touch-styrning
• Inbyggd LED-ljuslist framtill
• Metallfilter som kan diskas i diskmaskin
• Eftergångsfunktion för fortsatt utsug under en kort period
• Möjlighet till balanserat luftutbyte med en luftutbytesmodul

Ett praktiskt val för ett rent köksutseende med enkel användning och grundlig ventilation.

Circular shaped fluorescent lighting with improved color renderingThis circular TL lamp (tube diameter 29 mm) enables omni-directional light distribution. It is suitable for use in a wide range of luminaires for various purposes, including decorative ones, in ‘human’ applications such as schools, offices, shops and homes, and for lighting of residential areas. Product Benefits • /80 colors have good color rendering and high efficacy compared with standard colors • Symmetrical, omnidirectional light distribution • Create atmospheres from warm white to cool daylightProduct Features • Available in various color designationsApplication • Suitable for use in a wide range of luminaires for various purposes, including decorative luminaires • Ideal for ‘human' applications such as schools, offices, shops and homes

LED-spotlight, GU10, 3 W (motsvarande 35 W), klass A+, vitt ljus, 3000 K

The FNIRSI DSO-TC4 is a portable 3-in-1 instrument combining a digital oscilloscope, electronic component tester and signal generator in a compact handheld design. It is intended for electronics diagnostics, service work and educational use, where multiple measurement functions are required in a single device. The oscilloscope supports a 10 MHz bandwidth with a 48 MSa/s sampling rate, enabling real-time waveform analysis with sufficient detail for general signal inspection. The integrated signal generator provides 13 predefined waveforms with frequency output up to 50 kHz and adjustable amplitude, allowing simulation of circuit behaviour. The component tester automatically identifies and evaluates diodes, transistors, MOSFETs, resistors and capacitors for rapid fault detection. A 2.8-inch TFT display ensures clear visualization of results, while the 1500 mAh rechargeable battery with USB-C charging supports extended portable operation.

High quality and robust performanceHigh-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lampsProduct Features • Minimal lamp power spread • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • CDM lamp life increased by up to 30% • Eliminates all visible lamp flickerApplications • Accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

LED-glödlampa, form: cirkulär kanal, glaserad finish, E27, 14.5 W (motsvarande 100 W), klass F, varmt vitt ljus, 2700 K

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Beautiful sparkle, reliable life

Range of single-ended, compact, high-efficiency, discharge lamps with a stable coloru over lifetime and a crisp, sparkling lightProduct Benefits

• Stable colour impression over lifetime
• High lamp efficacy results in low operating costs and low heat generation
• Long lamp life compared with incandescent and halogen lamps
• Relatively low heat output enhances comfort for shoppers and staff
• All types are UV-Block for reduced fading risks

Product Features

• Crisp white light
• Superior colour quality
• Allows small-size luminaires designs that give high beam intensities

Environment

• Good environmental choice because of high energy efficiency and long reliable life
• This product is RoHS compliant
• This product is covered by WEEEApplication
• Shops and shop windows, offices and public buildings
• Decorative outdoor: floodlighting and pedestrian areas

Warnings and Safety

• Use only in totally enclosed luminaire, even during testing (IEC 61167, IEC 62035, IEC 60598)
• The luminaire must be able to contain hot lamp parts if the lamp ruptures
• Control gear must include end-of-life protection (IEC 61167, IEC 62035)
• Lamps may use electronic or electromagnetic control gear, except 35 W/942 and 20 W lamps, which must use electronic control gear.

Vägg-/taklampa, LED, 20 W, varmt vitt ljus, 3000 K, vit

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

LED-glödlampa, form: P40, klar finish, E14, 4 W (motsvarande 40 W), klass E, varmt vitt ljus, 2700 K

Induktionshäll med integrerad fläkt, Thermex Typhoon kombinerar 9-stegs värmereglering, boost på varje kokzon, barnsäkerhet och dokumenterad uppfångning av frånluft på över 75% i en enhet.

Thermex Typhoon är en platsbesparande kökslösning med en inbyggd fläkt som drar ner matos och ånga mellan kokzonerna, vilket eliminerar behovet av en fläktkåpa ovanför hällen.

• Maximalt luftflöde upp till 623 m³/h
• Touchkontroll i glas
• Restvärmeindikator
• 99-minuterstimer
• Svart glasmaterial
• Metallfilter som tål diskmaskin

Med sin integrerade design och eftergångsfunktion hjälper Thermex Typhoon till att ventilera grundligt samtidigt som matlagningsytan hålls ren och fri från störande inslag.

LED-spotlight, form: PAR16, GU10, 3.9 W (motsvarande 35 W), klass F, svalt vitt ljus, 4000 K

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

LED-spotlight, GU10, 4.6 W (motsvarande 50 W), klass A+, varmt vitt ljus, 2700 K

CorePro LEDbulbs are compatible with existing luminaires with E27 sockets and are designed for retrofit replacing traditional incandescent lamps. They provide high energy savings and minimize maintenance costs. The CorePro LEDbulb is the perfect lamp for your basic lighting needs. It provides the beautiful light and reliable performance you expect from LED, at an affordable price.

An energy-efficient solutionHF-Performer III TL5 is a slim and high-frequency electronic ballast for TL5 and TL5 Eco fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Product Benefits • Optimal savings can be achieved using HF-PIII together with TL5 ECO lamps (system solution). • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Suitable for luminaires in protection class I and, after testing, class IIApplications • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lot

LED-spotlight, GU10, 3.1 W (motsvarande 25 W), klass A+, varmt vitt ljus, 2700 K

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

LED-spotlight, form: PAR16, GU10, 3.7 W (motsvarande 35 W), klass G, varmt vitt ljus, 2700 K

Ej inbyggt kompakt lysrör, form: dubbel biax, 2G10, 36 W, klass A, varmt vitt ljus, 3000 K

LED-glödlampa med reflektor, form: R50, E14, 2.8 W (motsvarande 40 W), klass A++, varmt vitt ljus, 2700 K

Lysrör, form: cirkulär kanal, G10q, 40 W, klass A, svalt vitt ljus, 4000 K