Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

kraveværktøj i kuffert VFT-808-MIS Produkt beskrivelse: Fint kraveværktøj fra Value, der kommer i kuffert, et godt supplement til ens eksisterede udst...

VET-19Li Batteridrevet kraveværktøj Produkt beskrivelse: VET-19Li er et batteridrevet, tidsbesparende flareværktøj,Forskellige størrelse klamper til v...

Elma Laser R107 Modtager Produkt beskrivelse: Detektor til hele Elma x360 serien.Detekterer grøn linjelaser med pulsfunktion på afstande op til 50 met...

Prøveledning 2611 silikone 100 cm grøn Produkt beskrivelse: Kvalitetsprøveledning med fast kappe, dobbeltisoleret højfleksibel silikone.Opfylder IEC 6...

Kyoritsu KEW is a unique instrument for measurement of low DC currents, typically found in process industry, where it is essential to measure control current signals, without breaking the loop. The instrument is equipped with a tiny current clamp, making KEW2500 ideal for measurements in even inaccessible spaces.KEW 2500 is equipped with back lit dual display, with large digits, to read current directly in mA simultaneously with 0-100% in 4-20mA range. The instrument is furthermore equipped with LED flashlight, analogue output, for external logging, auto zero and data hold. The instrument measures current in a wide and accurate range from 0.01 to 120.0 mA.Kew 2500 fulfills IEC 61010-1 CAT II 300V and is supplied ready to use incl. bag, batteries and manual.

Standard 16A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs

Elma 46 is a easy and very econimical instrument for fast failure finding on LAN and Coax installations. The right solution for the professional user who wants a little bit more, than just test the cable. By one push on the TEST button the instrument will measure cable length and full wiremap (pin connection) with control for both short curcuits, break downs, swithed and splitted pairs. A lot of the above failures can even be tested before you have attached your remote in the opposit end. The result is clearly been shown in the large display. The instrumentet is evenmore able to save up to 100 testsresults in the memory. Elma 46 is together with the numbered remote ID s, perfect for determination of mismatched cable installations. A row of terminator ID’s is mounted in the patch panel. When the instrument is doing the cable test i the opposit end, it will show which terminator ID it is looking at. Elma 46 is equipped with a safety circuit which protects against telco rings and loop voltages, if it by a failure is connected to an active telephone line. Elma 46 is delivered with pouch, UK manual, adapter cable and terminator ID#1. Technical data: Cable length: 0,5-350 m Resolution: 0,5m Accuracy: 5% + 1 m Memory: 100 measurements Safety Curcuit: Withstand telco voltage and loop voltage Connector: RJ-45, BNC Cable types: PDS (UTP, FTP, STP), Coax Battery: 6 x 1,5V LR 03 (Incl.) Size: 152 x 72 x 35 mm Weight: 360 g

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

12 x Remoteenheder units VDV II

Laserbrille for grøn laser Produkt beskrivelse: Dæmper alle andre farver, men lader den grønne farve, fra f.eks. Elma kryds- og linjelasere, skinne kl...

Elma 641 Easy Flex Leakage detector for airpressure, gas installations and more. Including bag og earphones.

Elma Combitest 425 is an innovative multifunction installation tester capable of carrying out safety tests on civil and industrial electric systems in compliance with IEC/EN61557-1. Furthermore the instrument is a 1 phase energy analyze and is capable of saving results of environmental parameters (illuminance, temperature), leakage current, active power, harmonics, power factor measurements on single phase systems. The resistive TFT color touch-screen display, the icon menues, the on screen help and the userfriendly development make the instrument extremely intuitive even for unskilled users. Its numberless features grant the user a wide range of applications in the world of measurements. The multifunction installation tester Elma Combitest 425 allows saving all measures into an internal memory so transferring the saved data to a PC by means of USB (optional) or built in WiFi interface with an iOS or Android smartphones or tablet . The software supplied among standard accessories allows printing the testing reports. The instrument also drives optional short circuit adapter to carry out high resolution (0.1mOhm) loop/line impedance measurements with prospective short-circuit current calculation. This allows accurate measurements even close to power stations enabling the user to correctly size the protection devices in any system. Further possible tests consist in checking breakdown current, tripping current, I2t relative to breakers (MCB) with curves B, C, D, K and fuses type gG as well as aM and the percentage voltage drop on the main power lines. The test on earth leakage relay tester RCDs up to 10A (with optional accessory) is also possible with the instrument. Through optional clamp it is possible to measure the leakage current.

Elma RT606A is a handy electronic phase sequence tester that, with powerful LEDs show rotary direction and indicate the individual phases. The instrument meets IEC 61010-1 CAT III 300V and comes with safety test leads, 3 insulated alligator clips and 3 test sticks. Technical data: Working Voltage: 150-500V Frequency: 50/60Hz Measuring current: <3.5 mA Dimensions: 130 x 72 x 30 mm Weight: 190 g

Unique motor tester which is able to test everything concerning motors, generators, frequency inverters and more. TR1000 is measuring the inductance in the motor windings and lead-/ insulation failures, both directly on the motor or through the installation. The inductance measurement is the only safe measuring method, and it gives a much larger safety than a normal resistance measurement. TR1000 is a must have instrument for professional service/troubleshooting and preventive maintenance. Is delivered in a bag incl. batteries, test leads, clips and manual. Technical data: Motor test from: 10W-1000kW Inductance measure voltage: Max. 9V Insulation measurement: 500V Battery: 6x1,5V LR6 (incl.) Size: 95x158x60 mm Weight: 800 g

HT PV-Isotest 1500VDC isolationstester til solceller Produkt beskrivelse: HT PV-Isotest er det perfekte instrument hvis du skal idriftsætte og fejlfin...

Elma CM07 is a true RMS current clamp in a very handy design for easy measurements of both AC and DC currents. The instrument has extra fine resolution, 3 34 digit display and analog bargraph. Elma CM07 is equipped with automatic zeroing, relative zero, min/max memory, data hold and will measure both AC/DC and frequency with the clamp. The instrument complies with IEC 61010-1 CATII 600V and CATIII 300V and is delivered complete incl. bag, batteries and user manual. Technical data: Current AC: 0-4-40-100-400A Resolution: 0,001-0,01-0,1A Current DC: 0-40-400A Resolution: 0,01-0,1A Accuracy: ±1,5% + 2 D Frequency: 0-1000kHz Display: 3 3/4 digit Max display: 3999 Clamp width 24 mm Battery: 2x1,5V LR6 (incl.) Measurements: 180x50x29 mm Weight: 200 g

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.

Mini tømmeaggragat R32, 2 kompres, 730W Produkt beskrivelse: VRR-24L-R32 fra Value, er en højt ydende tømmestation, der er anvendelig til mange forske...

Elma X-Reel is a new smart cable roll with safety test lead. The roll is equipped with a practical shoulder strap and a smart handle, which makes the work with Elma X-reel very simple. Elma X-reel is also equipped with at unique system, which is able to filters out the wire, when using the cable roll. Elma X-Reel er perfect on measuring on earth connections and protection wires, where you normally have to use very long wires to measure continuity. Elma X-reel includes 33 meters 0,75 mm2 black PVC wire. Can be loaded with max 2A. Complies with IEC 61010-1 CAT III 1000V/CAT IV 600V. Technical data: Length: 33m Size: 0,75mm2 Current: max 2A IEC 61010: Cat III 1000V, Cat IV 600V

Test lead set for, among other things, phase sequence test

VES-100A kølemiddelvægt 100 kg Produkt beskrivelse: VES-100A er en hel lavpraktisk vægt til kølemiddel, præcis og betjeningsvenlig med opløsning ned t...

5,7064454803e+12

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

The SparOmeter is a energy meter which can be connected directly in the socket, and will nice and easy show the energy on all 230V appliances up to 2300W/10A. The meter has a lot of features: V, A,W, min.W, max.W, kWh and running time. The SparOmeteret can be set to a measuting period on 1, 7, 30 days or continuesly, the meter will remember the values when disconnected. Technical data: Voltage: 230V AC Current: 10A AC Power: 2300W Accuracy: Class 2 Size: 138x69x75 mm Weight: 180 g