Elma Instruments - sita 2

Red/black 1000V/12A Kit including 1 red and 1 black silicone test lead 0,75 mm2, 100 cm. Equipped with 4 mm banana plug with protection cap and and test stick with the possibility of conenction on a clip etc. Complies with IEC 61010-1 CAT II 1000V. Technical data: IEC 61010: Cat II 1000V

Elma 1000A is a handy safety voltagetester with smart design features. The instrument has a clear LED indication of relevant voltages and automatically polarity indication. The tester has a smart connection with 19mm spacing to fit directly into the wall socket and allows one-hand operation. Elma 1000A is performed in IP 54 and meet particular IEC 61010-1 CAT III 690V and EN 61243-3.

Elma Volt Test Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma Volt Test Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma Volt Test Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards. Technical data: Voltage range: 12-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 146x 18 mm Weight: 40 grams

Universal instrument bag Elma Maxi – ideal for multimeters and other instruments.

Elma Laser 3 is a new and professional laser distance meter (LDM) with lots of automated functions and calculations. The instruments is simple to operate, and measures distances to 80 meters, has build in angle measurement and large, backlit multi display. Using the Bluetooth, Elma Laser 3 turns into a clever tool for documentation. Take a picture, using your smart phone or tablet, and quickly drag and drop the measurements and comments to the picture in the free Elma Link App and share by mail or other forwarding apps on your device. Elma Laser 1 makes it fast to measure room dimensions, ceiling height etc. Elma Laser 3 has build in memory, timer, +/- calculation and area and volume calculation. The instrument is delivered ready to use incl. nylon bag, batteries and manual.

Elma 106 indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Technical data: Voltage range: 100-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 144x17 mm Weight: 50 grams

Elma EVSE-200 type 2 adapter Produkt beskrivelse: Elma EVSE-200 adapter aktiverer ladestander, ved at simulere tilslutning af elbil, og bringer målepu...

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

Elma 25 is a smart mini pocket multimeter in card format, equipped with the brand new intelligent function "Auto Check", whick automatically detects and choose AC voltage, DC voltage and continuity test/resistance. The instrument has a large display and measures voltage, resistance, frequency, continuity and capacity. Elma 25 is equipped with automatically range selection, auto shut-off and data hold. The instrument complies with IEC 61010- 1 CAT III 300V and CAT II 600V and is delivered incl. manual, batteries, test leads and rubber protection cover. Technical data: Voltage: 0-6-60-450V AC/DC Accuracy: DC: ±1,2% + 5D, AC: ±1,5% + 5D Resistance: 0-6k-60k-600k-6M-40M Frequency: 10Hz-100kHz Capacity: 0-100n-1000n-10-2000F Display: 3 5/6 digits Max. display: 5999 Battery: 3V CR2032 (inkl.) Size: 113x53x10 mm Weight: 78 g

Metrel S2026 earth set 20m - Complete accessory for ground resistance measurement in a bag.

Eurotest XC "AUTO-TEST" multi installations tester is testing the mandatory tests much faster than any other tester on the marked. It has never been easier to test, measure and do documentation - just by pushing one button. FUNCTIONS: Voltage- and frequency // short curcuit current, loop impedance, phase-zero, phase-earth and phase-phase // Is testing all kinds of RCD`s , type AC, A, B, B+ & F, and tripout time and tripout current with a smart test current function // Low (resistance) ohm 7 and 200mA test on equipotential bondings // Insulations test from 50 to 1000V test voltage // 2-and 3-pole earth resistance to earth // specific earth resistance with ro adapter (extra accessory) // earth resistance measurement with 2 clamps (extra accessory) // Phase rotation detector // TRMS leakage- and current measurement (extra accessory) // First Fault leakage current measurement and indicative resistance measurement (IT-system) // memory with unique possibility for building up memory struct

The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare app.

Elma BM 257 is a new smart mini mult imeter, which gives two new exiting functions. Auto Check is an intelligent function which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. All you need to do is to turn on the instrument and measure. Low Z is voltage measurement with a low impedance, which means, that the measuring point is loaded, and therefore is it the real voltage you are measuring. The instrument has build-in non contact detection of electrical fields, whick can be used to detect electromagnetical fieds from PC screens, or used as a non contact voltage detector. Elma BM 257 measures true RMS current, voltage, resistance, frequency, capacity, continuity and temperature. Elma BM 257 has backlighted display with analog bargraph for easy and quick reading. The instrument is equipped with automatical/ manual range selection, relative measurement, Peak hold, min/max, datahold and intelligent auto power off. With the PC-communication and the Windows software (extra option) is it possible to make ON-Line data logging. The instrument is very safeand robust. It can handle ffailure connection and is equipped with high efficiency fuses. Complies with IEC 61010-1 CAT III 600V. Elma BM 257 is delivered incl. rubber protection, test leads, temperature sensor (wire sensor -50 til +250°C), battery and manual Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-3000F Frequency: 10Hz - 50kHz Temperature: -50...1000°C, (included wire probe -50...250°C) Diode test: 0-1000mV, 0,56mA < 1,8V DC Continuity test: < 10 akustical signal Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Flir C5 is the first FLIR Cx-Series thermal camera to offer the FLIR Ignite cloud-based solution. When connected to Wi-Fi, professionals can directly upload, store, and back up images and videos to FLIR Ignite. Professionals can also manage and share the data via email from any mobile device or desktop computer. With all images and videos in one place, sharing data with team members and creating reports for customers is convenient and simple.

The normal test leads are typically 1-2 meters, this is not always enough. For example, The statutory measurement of continuous electrical connection in protective conductors and in equalization connections often requires very long test leads.Elma offers a variety of solutions with test leads mounted on a practical cable drum, which ensures that the line is always in order and it is easy to roll out the required length. IEC 61010-1 cat. II 250V.

Normal test leads are typically 1-2 meters. This is not always enough. When you have to measure elecrical continuity i protection/earth wires, you often need to have very long test leads. Elma offers a lot of different solutions with test leads mounted on a practical cable drum, which ensures that it allways will easy to use, and to use on the correct length. Complies with IEC 61010-1 Cat II 250V. Technical data: IEC 61010: CAT II 250V

Elma iTest 7400 Installation Tester

Elma CM07 is a true RMS current clamp in a very handy design for easy measurements of both AC and DC currents. The instrument has extra fine resolution, 3 34 digit display and analog bargraph. Elma CM07 is equipped with automatic zeroing, relative zero, min/max memory, data hold and will measure both AC/DC and frequency with the clamp. The instrument complies with IEC 61010-1 CATII 600V and CATIII 300V and is delivered complete incl. bag, batteries and user manual. Technical data: Current AC: 0-4-40-100-400A Resolution: 0,001-0,01-0,1A Current DC: 0-40-400A Resolution: 0,01-0,1A Accuracy: ±1,5% + 2 D Frequency: 0-1000kHz Display: 3 3/4 digit Max display: 3999 Clamp width 24 mm Battery: 2x1,5V LR6 (incl.) Measurements: 180x50x29 mm Weight: 200 g

Kyoritsu K3132 is a safe small and handy insulation tester, whick complies against even the toughest demands. The instrumentet has following advantages and functions: - Chooseable test voltage 250, 500 og 1000 V - Lockable test not – Then you can have both hands free - Mirror display scale – For safe reading - Built in ohm meter for measuring on earth conenctions - Built in voltage meter 0-600V - Exstra safe and robust – Dust and splashproof IP 54, complies with IEC 61010-1 CAT III K3132 is delivered incl. batteries, test leads and manual. Technical data: Test voltage: 250, 500 og 1000V user choseable Measuring ranges: 0-100, 0-200, 0-400 M Measuring current: > 1mA Ohm meter: 0-3 / 0-500 Measuring current/voltage: > 200 mA / 4 V Voltage meter: 0-600 V AC Battery: 6x1,5V LR06 (inkl.) Size: 106x160x72 mm Weight: 560 g

5,7064454803e+12

Senko sgt o2

Kyoritsu K 2031is a small clamp meter in never seen and very convenient mini size. The instrumentet measures AC current and is able to, due to it s size, be used almost anywhere - also in places where it should be impossible to measure with a normal clamp meter. THe instrumentet is equipped with data hold, complies with IEC 61010-1 CAT III 300V, and is delivered in pouch incl. batteries and manual. Technical data: Current: 0-20-200A AC Resolution: 0,01-0,1A Accuracy: ± 2% + 5D Display: 3 1/2 digits Max display: 1999 Clamp size: 24mm Battery: 2x1,5V LR44 (incl.) Size: 145x51x25 mm Weight: 95 g

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

Set consisting of 1 red and 1 black cord, 100 cm, provided with 4 mm banana plug with protective cap and thin 2mm test stick.

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g