Elma Instruments

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

The Leica DISTOTM D110 is world’s smallest laser distance meter with integrated Bluetooth® Smart technology. By using its precise measurements users can create floor plans and sketch easily by connecting it with the Leica DISTOTM sketch app on a smartphone or a tablet. Whether an interior designer, painter or building contractor, the Leica DISTOTM D110 will make it easier to get the job done right.Distance and area measuringBluetooth® SmartIP 54 dust and splash water protectionRemovable pocket clip

Zircon HD70 Stud and Steel Rule Finder Product Description: Zircon HD70 OneStep® is a smart and practical tool for quickly locating wooden and metal studs. The stud finder has a display that indicates signal strength and the location of the instrument in relation to the stud. As something completely new, the tester lights up red precisely when the center of the stud is found. When dangerous AC voltage is detected, the instrument warns with a clear sign in the display. The instrument comes with an operating manual.

Technical specifications:

• HxWxD (mm): 180x74x34
• Weight (grams): 159
• Battery type: 9V 6F22 (not included).

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

MultiScanner HD900c OneStep multifunction stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.

Elma DT-128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures the moist 20-40mm n the material. Just hold the ball-tip against the surface and the moist is immediately shown in the large, backlit display. Elma DT-128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use incl batteries and manual. Note: The material to be measured should be at least 20-40mm (depending on the material) to provide a reading.

With this smart magnetical probe, the test lead automatically will be fixed on the measuring point, without any help from tools etc. Fits into a 4mm banana plug. Complies with IEC 61010-1 CAT III 600V. Technical data: Current: Max 2A Diameter: Ø6,6mm. IEC61010: Cat IV 600V, Cat III 1000V

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Standard 16A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.

Elma tripod/camera stand in aluminum with adjustable height 46-160 cm, suitable for use as a stand for devices such as cross and rotary lasers, distance meters, and other equipment with a standard 1/4-inch thread.

Delivered in a nylon bag with a tilt head.

Elma Laser x360-4 med 4 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 4 stk....

Smoke pen including 6 pieces of smoke sticks. Burn time: 30min/stick

With ElmaFlex 460 Elma is reinventing the clamp meter, it has never been easier to measure current in a big current range. The clamp is made of a very flexible material, and with a diameter on only 7,5mm and a length on 460mm, is it possible to measure on small places and is able to measure on a big bunch of wires. ElmaFlex 460 is in a ergonomical design, so that you can use it with only one hand, and also with glowes. The instrument measures true RMS current in the range from 0,2 to 3000A AC. The instrument is equipped with backlighted display, data hold, automatical range selection, and auto power off. ElmaFlex 460 complies with EN 61010-1 CAT IV 600V and CAT III 1000V, and is delivered incl. batteries and manual.Technical data:Current: 30,00...300,0...3000A ACResolution: 0,01...0,1...1 A ACAccuracy: ±3%rdg + 5DigitMax display: 33,00...330,0...3300ADisplay update: 4 times pr. sec.Frequency respons: 45-500HzLength of clamp: 460mmBattery: 2 pc. LR03 AAA batteriesSize:

The Elma Laser 4 Dual is a truly unique distance meter that measures in both directions, or up and down. No more getting on your knees to measure a room height, or having to go all the way to the wall to find the width. With the Elma Laser 4 Dual, you simply measure from the middle of the room, and with its dual laser, it measures both the distance to the ceiling and floor, displaying the total room height. Or, stick your hand through the ceiling hatch and measure the entire length of the attic in one press. This saves time and ensures accurate measurements.The laser is also equipped with a digital color display that rotates based on how the instrument is held, making readings easy from any angle. In addition to the digital display of the tilt, a digital version of the bubble level has been added, which, with its clear green color, indicates when the instrument is held horizontally.Furthermore, the instrument features many standard functions from professional distance meters, such as tracking for continuous measurement, the Pythagorean function for indirect measurements like facade heights, etc. It also includes the +/- function and a calculator for calculating areas and volumes. It is delivered complete with a carrying case, batteries, and a user manual.

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

5,7033174717e+12

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

Kyoritsu 1030 penmultimeter Produkt beskrivelse: Kyoritsu 1030 er et pen-multimeter, udformet så det kan betjenes med en hånd. Instrumentet måler AC/D...

The ElmaLOG 181 series, we dare to say, is the easiest datalogger in the world. The logging is started with the push of a button. When plugged in the USB of a computer, the PDF and Spreadsheet (DBF) rapport ready in the instrument, which now works as a simple USB storage. ElmaLOG181TH is a temperature and moist logger. The ElmaLOG 181 is provided with real time clock and memory for 60,000 logs in the memory. It's also possible to program an advanced logging using the free software (Find it in the Download tab). This will enable user selectable alarm limits, editable log interval etc. ElmaLOG 181 is provided ready to use incl. wallmount, manual and battery.