Elma Instruments - sita 5 - Kvalitet till konkurrenskraftiga priser

Elma Instruments Crocodile clip - 5004 yellow

Type 5004, extra powerfull, isolated crokodile clip, 1000V/20A. Technical data: IEC 61010: Cat III 1000V

144,00 kr (115,20 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test lead kit pvc

Red/black 1000V/20A Kit including 1 red and 1 black PVC-wire, 1 mm2, 100 cm, equipped with 4 mm angle banana plug with protection tube and test probe with option for mounting clip and more. Technical data: IEC 61010: CAT II 1000V

395,00 kr (316,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Flexible grab clip - 6005 red

Type 6005, for 4 mm banana plug. Technical data: IEC 61010: Cat II 1000V

200,00 kr (160,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Safety banana plug - 1076 blue

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

117,00 kr (93,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Testprobe black

Testprobe black = 140mm

165,00 kr (132,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Testprobe blue

Testprobe blue = 140mm

165,00 kr (132,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test probe green l=140mm

Test probe to connect in the end of a test lead with banana plug. Specially suitable for use in multi installation testers. Technical data: IEC 61010: CAT II 1000V (without protection cap), CAT IV 600V (with protection cap)

165,00 kr (132,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test lead - 2711 blue 200cm

Blue 200cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

243,00 kr (194,40 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Banana plug - 1060 red

Type 1060, multi-blade 4 mm banana plug for screw mounting, 36A. Technical data: IEC 61010: 33V AC / 70V DC

102,00 kr (81,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Voltstick ex-approved

ATEX-approved voltage detector non-contact can tell if there is AC voltage present. If there is voltage present it will be indicated with a powerfull and clearly orange light. Volt Stick EX is perfect in controlling of eg.: - Fuses, without takeing them out. - Sockets. - Cables and wires, will find the an opening through the insulation. - Serial connected light chains, here it will find broken lights. Elma Volt Stick EX complies with IEC 1010-1 CAT III 1000V, EX: II 2G EEx ib IIC T4 and Nemko 03ATEX1456 and is delivered incl. manual and batteries. Technical data: Voltage range: 230-1000V AC Batteries: 2x1,5V LR 03 (incl.) Size: 146x 22 mm Weight: 40 g

687,00 kr (549,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Fuse for 515/525/859/898 - 0.44A

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

243,00 kr (194,40 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Crokodile clip mini red

4 mm, fully isolated, handy format, for 4 mm banana plug. Technical data: IEC 61010: 33V AC / 70V DC

116,00 kr (92,80 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Elma 711 termometer

Elma 711 is the robust and wellknown thermometer, able to measure temperatures all over the industrial applications. To meet growing wishes from the costumers, Elma 711 is now upgraded with an internal memory function. It is now possible to store the measurements in the memory of the instrument. There is room for 99 measurements in the memory. Elma 711 is thet "smallest" in this serie, and it is equipped with the most common and necessary functions to meet the requirements for a professional thermometer. Elma 711 is designed for type k-probes, whick is the most common probe in industrial applications. Elma 711 has the coorect ergonomical design, that does, that the use of the instrument can be made with only one hand, eventhogh all the extra features which is present in the instrument . The display, with the size 56mm x 53mm makes the reading of the values very easy. The instrument has buttons for max-hold, optional unit°C/°F, display resolution in 1°C or 0,1°C. In the function max-hold, the instrument is measuring continuesly, and the displayet shows the highest temperature present. The “MAX" symbol is in the display. The user freindly buttons are constructed thus a shift between the function are done very easily. Elma 711 shall be used together with type k-probes.

1 342,00 kr (1 073,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Kimo vt110 hotwire anemometer

Kimo VT110 hotwire anemometer, inclusive hard box and calibration certificate.

7 501,00 kr (6 000,80 kr)

Beställningsvara - leveranstid kan ej upplysas

Elma Instruments Cee test 32a - phase sequence tester

Standard 32A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs

667,00 kr (533,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test probe 121039 black

Type 121039, super thin test pin which is ideal for eg multi-plugs and other plugs where there is not much space. For mounting on 4mm banana plug, 1000V / 30A. Complies with IEC 61010-1 CAT III 1000V.

343,00 kr (274,40 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test lead - 2711 black 200cm

Black 200cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

215,00 kr (172,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Magnet for elma bm 20x/25x/52x/82x series

5,7064454104e+12

192,00 kr (153,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Easytest classic ke301

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

3 600,00 kr (2 880,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Kewmate 2012r true rms multi meter

Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

2 627,00 kr (2 101,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments CA1110 - Lux logger

CA1110 - Lux logger Produkt beskrivelse: CA1110 er en simpel og præcis luxlogger i EN5032 klasse C, med display, software til dokumentation, stor huko...

5 961,00 kr (4 768,80 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Elma bm257 sand rms multimeter

Elma BM 257 is a new smart mini mult imeter, which gives two new exiting functions. Auto Check is an intelligent function which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. All you need to do is to turn on the instrument and measure. Low Z is voltage measurement with a low impedance, which means, that the measuring point is loaded, and therefore is it the real voltage you are measuring. The instrument has build-in non contact detection of electrical fields, whick can be used to detect electromagnetical fieds from PC screens, or used as a non contact voltage detector. Elma BM 257 measures true RMS current, voltage, resistance, frequency, capacity, continuity and temperature. Elma BM 257 has backlighted display with analog bargraph for easy and quick reading. The instrument is equipped with automatical/ manual range selection, relative measurement, Peak hold, min/max, datahold and intelligent auto power off. With the PC-communication and the Windows software (extra option) is it possible to make ON-Line data logging. The instrument is very safeand robust. It can handle ffailure connection and is equipped with high efficiency fuses. Complies with IEC 61010-1 CAT III 600V. Elma BM 257 is delivered incl. rubber protection, test leads, temperature sensor (wire sensor -50 til +250°C), battery and manual Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-3000F Frequency: 10Hz - 50kHz Temperature: -50...1000°C, (included wire probe -50...250°C) Diode test: 0-1000mV, 0,56mA < 1,8V DC Continuity test: < 10 akustical signal Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

2 550,00 kr (2 040,00 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Test lead kit 2mm

Set consisting of 1 red and 1 black cord, 100 cm, provided with 4 mm banana plug with protective cap and thin 2mm test stick.

296,00 kr (236,80 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Fuse 400ma 6x32mm 1000v

Fuse 400mA, 6x32mm, 1000V, for:Elma 251sElma 257sElma 319sElma 805sElma 807sElma 878

252,00 kr (201,60 kr)

Leverantör, 2-3 vardagar leveranstid

Elma Instruments Magnettestprobe 606mg4 ø4mm (black / yellow)

With this smart magnetic probe, the test lead automatically locks to the measuring point without using tools and without loosening clamps. Fits 4mm bush on standard 4mm track. The Elma Magnetic Test Probe complies with IEC 61010-1 CAT II 1000V

240,00 kr (192,00 kr)

Leverantör, 2-3 vardagar leveranstid

Måndag-Fredag: (5/6-26 Stängt)	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss