Hager Komponenter för switchboxar och skåp

4P 40A 30mA A class

Humfree contactor 25A 4NO 230V Humfree for the control of circuitsGuarenteed silence during the entire life of the productCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Relay 16A 2NO+2NC 230VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 2

MCB 2P 6KA C-13A 2M

Latching relay 1NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog

MCB 3P+N 6KA C-16A 4M

MCB 1P+N 6KA C-16A 2M

Safety transformer with galvanic isolation between primary and secondary windings.
All transformers are thermally overload and short circuit protected.
Rated voltage: 230V / 12-24VAC
Load: 40VA
Rated current: In 12V/ 3.33A
Rated current: In 24V/ 1.67A
Ambient temperature: max. 35grC
Standard: EN61558
Dimensions: 4 modules of 17.5mm

Latching relay 4NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 48VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Motor starter for protection of 1 and 3 phase motors

Hager ADM466C tillbehör för elkapsling

MCB 2P 6KA C-10A 2M

Modular changeover switch 1x25A 230VAC 1MCentre OFF changeover I-0-II and common point onbottomFor use as a switch disconnector in all types of circuitsCategory AC22A 230V/400VNominel current 16A to 40A frame size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Modular switch disconnector 1-pole 16A 230V 1MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 16A to 32A size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Bell transformer 8VA 8-12V 2M

Cable terminal 1P prong 2 cables 16mm2

Safety transformer 60VA 12-24V 4M

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Modular switch disconnector 2-pole 25A 230V 1MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 16A to 32A size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Locking kit for MCB's

Contactor 25A 2NO 230VAC Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

MCB 3P+N 6KA C-13A 4M

MCB 1P+N 6KA C-16A 1M

Modular switch disconnector 1-pole 25A 230V 1MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 16A to 32A size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Latching relay 1NO 12VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 12VACPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.