Hager Komponenter för switchboxar och skåp - sita 2

MCB 3P+N 6KA C-13A 4M

Modular switch disconnector 1-pole 25A 230V 1MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 16A to 32A size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Hager ADM460C tillbehör för elkapsling

Relay 16A 2 NO 24VAC 1MRelay for control purposes of automatic controls in electrical systems in connection with dimmer and control buttonsRated Voltage: 250V 50 / 60HzCoil voltage: 24VACOperation category: AC1Number of links: 1,000,000Operating temp .: -10 to 50 ° CConnection: Solid 1-10mm2 / Flexible 1-6mm2Width: 1 module of 17.5mm

RCBO 1P+N 6kA C-10A 30mA ATechnical data:Release curve: CPoles: 2 poles.Nominal load (in): 10 ARated Voltage (Un): 230V + 10% / -15%Rated output current (Idn): 30mASensitivity Class AFrequency: 50HzRated breakdown: 6kA in h.t. EN61009-1IP protection: IP2x mounted in enclosure.Temperature: 30 ° C in h.t. EN61009-1Pollution rate: 2 in h.t. EN61009-1

For 6 circuit breakers 2P 63A

2P 40A 30mA A class

Latching relay 1NC+1NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

4P 63A 300mA A class

Bell transformer 8VA 8-12V 2M

Stair case time lag switchTechnical characteristics:Type of contacts: 1NOSupply voltage: 230V ACFrequency: 50/60 HzBreaking capacity: 16A 250V AC1Max. power with incandescent lamps: 2300 WType of connection: With screwConnection cross-sect. rigid cable: 1,5 / 10mm2Connection cross-sect. flexible cable: 1 / 6mm2Operating temperature: -10 to 55 °CNumber of modules: 1

Contactor 40A 4NO 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 230V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 4 / 25mm2 Connection cross-sect. flexible cable: 4 / 16mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 3According to standard: EN 61095

Hager ESD225S tillbehör för elkapsling

Hager insulated busbar 6X(1P+N) L1+L2+L3+Nl 12MNumber of poles: 4PMax operating voltage: 400 VConnection cross-sect. rigid cable: 16mm2Type of connection: with screw / quick connectEuropean directive RoHs: voluntary complianceEuropean directive WEEE: concerned

Contactor 25A 4NO 230VStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Modular changeover switch 1x16A 230VAC 1MCentre OFF changeover I-0-II and common point onbottomFor use as a switch disconnector in all types of circuitsCategory AC22A 230V/400VNominel current 16A to 40A frame size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

RCBO 1 pole + neutral 6kA C-13A 30mA HIResidual circuit breaker type HI with overcurrent protection13ADouble Pole (1P + N) 2 Module widthSensitivity - 30mARated Voltage: 230V / 50HzBreaking capacity - 6kAConforms to IEC 61009Tripping curve - CTrip class - class HiProvides protection on overload short-circuit & earth leakage faults Suitable for electrically disturbed networks with pulsated DC transients & harmonics

Latching 1NO 16A 250VAC + green LED 1M

Modular changeover switch 1x16A 230VAC 1MChangeover I-II and common point onbottomFor use as a switch disconnector in all types of circuitsCategory AC22A 230V/400VNominel current 16A to 40A frame size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Latching relay 1NO 8VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACCoil Voltage Un: 8VACPulse Length: min. 50ms and max 1 hourTire consumption v. AC operation: 20VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Auxiliary contact for MCB's and RCBO's

Latching relay 1NO 24VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230VACVoltage Voltage Un: 2 4VAC / 12VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Hager ADM466C tillbehör för elkapsling

MCB 3P+N 6KA C-25A 4M

MCB type B In: 13A