Hager Komponenter för switchboxar och skåp - sita 3

Contactor 25A 4NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Hager Schuko outlet for DIN rail 16A 230/250V2.5MConnection terminals: Plug-in terminal min 2x1 mm2/max 2x2,5 mm2Size: H:75mm W: 44mm D:66mm

Modular switch disconnector 4-pole 63A 400V 4MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 32A to 63A size 2 Connection terminals: rigid conductor 25mm2 - flexible conductor 16mm2

W: 80 x H:158 x D:125 mm

2P 40A 30mA A class

Motor starter for protection of 1 and 3 phase motors

Safety transformer 230/12-24V 4M

Modular changeover switch 1x16A 230VAC 1MChangeover I-II and common point onbottomFor use as a switch disconnector in all types of circuitsCategory AC22A 230V/400VNominel current 16A to 40A frame size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

MCB 3P 6KA C-10A 3M

Stair case time lag switchTechnical characteristics:Type of contacts: 1NOSupply voltage: 230V ACFrequency: 50/60 HzBreaking capacity: 16A 250V AC1Max. power with incandescent lamps: 2300 WType of connection: With screwConnection cross-sect. rigid cable: 1,5 / 10mm2Connection cross-sect. flexible cable: 1 / 6mm2Operating temperature: -10 to 55 °CNumber of modules: 1

MCB 1P 6KA C-13A 1M

RCBO 1 pole + neutral 6kA C-13A 30mA HIResidual circuit breaker type HI with overcurrent protection13ADouble Pole (1P + N) 2 Module widthSensitivity - 30mARated Voltage: 230V / 50HzBreaking capacity - 6kAConforms to IEC 61009Tripping curve - CTrip class - class HiProvides protection on overload short-circuit & earth leakage faults Suitable for electrically disturbed networks with pulsated DC transients & harmonics

Signal lamp LED red 230VAC 1M

Hager insulated busbar 6X(1P+N) L1+L2+L3+Nl 12MNumber of poles: 4PMax operating voltage: 400 VConnection cross-sect. rigid cable: 16mm2Type of connection: with screw / quick connectEuropean directive RoHs: voluntary complianceEuropean directive WEEE: concerned

Latching relay 1NC+1NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

For 14 circuit breakers 4P

Relay 16A 1NO+1NC 12VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 12Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

MCB 1P+N 6KA C-10A 1M

MCB 1P+N 6KA C-10A 2M

RCBO 1P+N 6kA C-13A 30mA ATechnical data:Release curve: CPoles: 2 poles.Nominal load (in): 13 ARated Voltage (Un): 230V + 10% / -15%Rated output current (Idn): 30mASensitivity Class AFrequency: 50HzRated breakdown: 6kA in h.t. EN61009-1IP protection: IP2x mounted in enclosure.Temperature: 30 ° C in h.t. EN61009-1Pollution rate: 2 in h.t. EN61009-1

Latching relay 16A 230V 2NORated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

MCB 1P 6KA C-6A 1M

Latching relay 2NC+2NO 230VTechnical Characteristics:Rated operational voltage Ue: 250 VFrequency: 50/60 HzVoltage Rated insulation voltage: 400 VDC control voltage: 110 VCommand voltage AC: 230 VElectric currentQuiescent current: 6 mARating: 16 APowerInrush power absorbed: 55 VATotal power loss under IN: 2,4 WEnduranceElectrical durability at nominal load in AC21in operating cycles: 150000Number of mechanical operations: 500000

Auxiliary contacts + adapter

Auxiliary contact 1 open + 1 closed