Hager Komponenter för switchboxar och skåp - sita 4

Hager Schuko outlet for DIN rail 16A 230/250V2.5MConnection terminals: Plug-in terminal min 2x1 mm2/max 2x2,5 mm2Size: H:75mm W: 44mm D:66mm

Latching relay 2NO 8V1 moduleRated operational voltage: 250VType of contacts: 2NOScrew connectionFrequency: 50/60Hz

Interconnection of overvoltage arrester 12M

Safety transformer 60VA 12-24V 4M

Latching relay 1NC+1NO 230VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 230VAC / 110VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Motor starter for protection of 1 and 3 phase motors

MCB type B In: 16A

Modular changeover switch 1x16A 230VAC 1MCentre OFF changeover I-0-II and common point onbottomFor use as a switch disconnector in all types of circuitsCategory AC22A 230V/400VNominel current 16A to 40A frame size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

Relay 25A 4NO 230V For control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 400V Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 2

MCB 2P 6KA C-10A 2M

Contactor 25A 4NO 24V 2MStandard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V AC control voltage: 24V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

Latching relay 2NO 24VFor pulse control of light installations.Rated current In: 16A AC1Rated Voltage Un: 230 / 400VACVoltage Voltage Un: 2 4VAC / 12VDCPulse Length: min. 50ms and max 1 hourPower consumption v. AC operation: 24VATouch protection: IP20Connection: 0.75 - 10mm2Dimensions: 1 module of 17.5mmStandard: EN 60669-1 / 2-2Note: Operating pressure must be selected in h.t. Attraction consumption, as well as lead length and dimension must be observed. See technical data in catalog.

Auxiliary contact 1 open + 1 closed

Modular switch disconnector 2-pole 25A 230V 1MFor cutting off all current circuitsCategory: AC22A 230V/400VNominel current: 16A to 32A size 1Connection terminals: rigid conductor 16mm2 - flexible conductor 10mm2

MCB 3P+N 6KA C-63A 4M

4P 63A 30mA A class

Contactor 25A 2NO 24V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 1NO 230VAC Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Safety transformer with galvanic isolation between primary and secondary windings.
All transformers are thermally overload and short circuit protected.
Rated voltage: 230V / 12-24VAC
Load: 40VA
Rated current: In 12V/ 3.33A
Rated current: In 24V/ 1.67A
Ambient temperature: max. 35grC
Standard: EN61558
Dimensions: 4 modules of 17.5mm

Bell transformer 4VA 8-12V 2M

Hager ESD225S tillbehör för elkapsling

MCB 1P 6KA C-13A 1M

For 14 circuit breakers 4P

MCB 1P+N 6KA C-6A 2M