Elma Instruments Instrument - sita 5

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

The EEx approved Magnet Stick is an instrument for testing for the presence of magneticfields. By simply holding the tip of the instrument near the test area, it indicates a magneticfield by glowing. The test lamp responds to all kinds of magnetic fields, from alternating currentto direct current and permanent magnets. (Sensitivity 300 gauss 0,3 mT). The ATEXand IECEx approvals are confirmed by NEMKO. (II 2G EEx ib IIC T4).APPLICATIONS:– Testing operating solenoid valves in pneumatic and hydraulic control equipment– Testing relays with coils and electrically-controlled solenoid valves in all types of vehiclesand machines– Testing solenoid valves when servicing oil burners

Kimo VT110 hotwire anemometer, inclusive hard box and calibration certificate.

Testprobe black = 140mm

With this smart magnetic probe, the test lead automatically locks to the measuring point without using tools and without loosening clamps. Fits 4mm bush on standard 4mm track. The Elma Magnetic Test Probe complies with IEC 61010-1 CAT II 1000V

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +900°C Size: 130x8 mm

Elma 3037 is atrue RMS clamp meter in a handy design for easy measuring of AC currents. The instrument has a good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3037 has low pass filter and "Inrush" for measuring on start/inrush currents. With the "Volt sense" function you are able to detect the voltage without contact. THe instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual. Technical data:Current AC: 0-60-300AResolution: 0,01-0,1AAccuracy: ±2% + 5 DDisplay: 3 5/6 cifferMax. display: 5999Clamp size: 24 mmBattery: 2x1,5V LR44 (incl.)Size: 147x60x31 mmWeight:100 g

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +450°C Size: 130x5 mm

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

Elma BM 821 is a new accurate and robust category IV 1000V multi meter, which, due the high safety is suitable for measurement in all of the installation. Elma BM 821 is equipped with a large bright 4 digits double display and fast analogue bar graph. The instrument is measuring voltage, current, frequency, resistance, capacity, diodes and continuity. Elma BM 821 has a lot of extra functions e.g. data hold, auto shut-off, automatically/manually range selection and RS232 port for PC-communication. With the PC-communication and the Windows software (orders separately), is it possible to make online data logging, where all the measured data can be viewed as: Digital display, analogue display, curve/graph and table. The instrument is UL listet, comply with IEC 61010-1 CAT IV 1000V and is equipped with high efficiency fuses with control function. Elma BM 821 is delivered incl. manual, battery, test leads and a robust rubber protection cover. Technical data:Voltage: 0-100m-1000m-10-100-1000V AC/DC Accuracy: DC: ± 0,08%+2D, AC: ± 0,5%+3D Current: 0-600-6000-60m-600m-6-10A AC/DC Accuracy: DC: ± 0,2% + 4D, AC: ± 0,6% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-6000-27mF Frequency: 10 - 100 kHz Diode test: 0-2000mV, 0,4mA < 3,5V DC Continuity test: < 10 acoustical signal Display: 4 og 3 5/6 digits Max. display: 9999 or 5999 Battery: 1x9V 6F22 (incl.) Size: 208 x 103 x 64,5 mm Weight: 635 g

16A CEE stikprop til bananstik Produkt beskrivelse: Stikadapter for CEE 16A til standard 4mm bananstik bøsning. Slip for at skulle holde 2, 3 eller fl...

Elma DT901 is a new security phase sequence / rotating field tester with large clear LCD display instead of traditional LEDs. The display, which is very easy to read even in sunlight, showing both the individual phases and rotation. Note that this instrument does not show rotary field by mistake connection, for example. two phases and zero, but only when there are three real phases connected. The instrument is equipped with integrated rubber sheath and meet IEC 1010-1 CAT III 600V and CAT IV 300V. Supplied incl. bag, safety test leads and 3 alligator clips. Technical data: Voltage range: 40 - 690VAC Frequency: 15 - 400Hz Dimensions: 124 x 61 x 27 mm Weight: 200 g

Air sucking System for faster response and higer sensitivity Microprocessor Control with advanced digital signal processing. Semiconductor gas sensor. High / Mid / Low Leak Sensitivity Selector R-22, 134a Hi : 3g/year , Mid : 15g/year , Lo : 30g/year R-404A, 407C, 410A Hi : 4g/year , Mid : 20g/year , Lo : 40g/year 7 LED Tri-colored Visual Leak Level Indicator Ambient Concentration Reset Warm-up Time: 45 seconds Snake Tube Length: 400mm (15.5) flexible stainless probe Auto power Off: 10 minutes Ambient Concentration reset. Equal Sensitivity to CFCs, HCFCs and HFCs. Low battery indication. Reference Leak source included. Hard Carrying case included.

Elma 2500 current clamp with an open current clamp, 200A AC.

The instrument is designed to easy and quick, test of LAN cable installations. The instrument can test for short circuits, interruptions, crossed pairs, reversed pairs and split pairs. The instrument is light and handy. Test result is displayed using a 14 segment LED display and 8 LEDs. Cable tester is equipped with a protection circuit that prevents damage to the instrument, if you mistakenly select the telephone instead of the data connector. Elma 45 LAN cable tester is supplied complete in bag incl. battery, adapter cable, manual and terminator # 1 Technical data: Test cable length: 1,2-150 m Circuit Protection: Withstand ring voltage and loop voltage. Connector: RJ-45, BNC Cable Types: UTP, COAX Battery: 9 volt 6F22 (included) Dimensions: 170 x 52 x 38 mm Weight: 180 g

Elma DT-172 is a smart data logger with build-in sensor for temperature and hunidity. All the values is shown directly on the display with indication of both actual value, time, date, maximum and minimum values. The logger has many user possibilities as fx. monitoring rooms, coolers, food, transportation and more. Elma DT-172 has a build-in real time clock and can store 16.000 sets of measurements in the memory. The datalogger can easily be programmed through the USB communication with the possibility of chosing logging interval, number of measurements and programmed alarms. All measurements can be transferred to a PC for control and documentation. Elma DT-172 is turned on, just by one simple push on a button. Datalogging ON and alarm is indicated with LEDs. The dataloggeren is delivered incl. lockable wall mounting, software, USB-cable, manual and battery. Technical data: Temperature: –40...70C°. Accuracy: +/-1°C (-10...40°C) Humidity: 0-100%RH Accuracy: +/-3% RH (40...60%) Logging interval: Between 1 sec. and 24 hours Memory: 16.000 sets of measurements Battery: 1x3,6V 1/2AA lithium, incl. Size/weight: 94x50x32mm/92g

New infrared thermometer which is able to measure the tmeperature without contact. Elma 611B has adjustable emission factor from 0,1 to 1,00. This does that the instrument is able to measure on all kind of surfaces. The instrumentet has HI/LOW alarm function. By enter the maximum- or minimum temperature you can make quick measurements, and that without looking at the display, because the instrument will give a high alarm sound if the maximum- or minimum temperature is reached. A short reaction time - app. 0,15 second - does Elma 611B suitable for quick measurements as for example screening of refrigerators/freezers, measurements on moveable parts in machines and components in electronics. Elma 611B has backlighted display and is equipped with the newest kind of technique where a double laser marker is indicating the size of the measuringe area, so you as user knows where the measuring is done. With a measuring condition on 30:1 Elma 611B is the perfect solution for measuring on

HT65 multimeter 1500VDC/1000VAC Produkt beskrivelse: HT65 tilbyder helt unikt 1500V DC skala, perfekt til f.eks. måling på solceller. For at forhindre...

Software topview med PC kabel Produkt beskrivelse: Topview Software inkl. USB kabel Tekniske specifikationer: Vægt (kg): 0,3Brand: HTType: Software

Elma 1000A is a handy safety voltagetester with smart design features. The instrument has a clear LED indication of relevant voltages and automatically polarity indication. The tester has a smart connection with 19mm spacing to fit directly into the wall socket and allows one-hand operation. Elma 1000A is performed in IP 54 and meet particular IEC 61010-1 CAT III 690V and EN 61243-3.

Kyoritsu K 2031is a small clamp meter in never seen and very convenient mini size. The instrumentet measures AC current and is able to, due to it s size, be used almost anywhere - also in places where it should be impossible to measure with a normal clamp meter. THe instrumentet is equipped with data hold, complies with IEC 61010-1 CAT III 300V, and is delivered in pouch incl. batteries and manual. Technical data: Current: 0-20-200A AC Resolution: 0,01-0,1A Accuracy: ± 2% + 5D Display: 3 1/2 digits Max display: 1999 Clamp size: 24mm Battery: 2x1,5V LR44 (incl.) Size: 145x51x25 mm Weight: 95 g

Elma Laser 3 is a new and professional laser distance meter (LDM) with lots of automated functions and calculations. The instruments is simple to operate, and measures distances to 80 meters, has build in angle measurement and large, backlit multi display. Using the Bluetooth, Elma Laser 3 turns into a clever tool for documentation. Take a picture, using your smart phone or tablet, and quickly drag and drop the measurements and comments to the picture in the free Elma Link App and share by mail or other forwarding apps on your device. Elma Laser 1 makes it fast to measure room dimensions, ceiling height etc. Elma Laser 3 has build in memory, timer, +/- calculation and area and volume calculation. The instrument is delivered ready to use incl. nylon bag, batteries and manual.

Elma Laser x360-4 med 4 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 4 stk....

DT 2236 is a handy combined instrument (photo/contact) with 3 functions in one instrument. DT2236 measures: - rpm non-contact with light and reflektions tape. - rpm mechanical, with measuring peak. - rpm surface speed, with measuring wheel. All this means that DT 2236 can replace 2-3 other instruments, and the operation have been even more easy to use. DT 2236 automatically remember 3 values - last, highest and lowest value. The instrumentet measures RPM, m/min and ft/min. and is delivered in pouch inlc. extra accessories and manual. Technical data: Display: 5 digits, 10 mm LCD Range, photo: 5-99.999 RPM, Range contact: 0,5-19.999 RPM Surface speed: 0,5-1.999,99 m/min 0,2-6.560 ft./min Accuracy: ± 0,05% + 1 D Batteries: 4x1,5V LR6 (not included) Size: 215x65x38 mm Weight: 300 g