Elma Instruments Instrument - sita 7

MI 3155 Eurotest XDe is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. It is fully compliant with functionality standards (e.g. IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. Besides those, the instrument supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current: <3.5 mA Phase indication: 100-690V AC Continuity test: 000 to 400 k Phase Sequence: 2 pole principle, 200-690V AC Safety: IEC 61010-1 CAT IV 600V, IEC 61243-3, Class B (1000V) Double Insulated, IP 65 Battery: 2x1, 5V LR03 (included) Dimensions: 241x68x28 mm Weight: 230 g

Flir C5 is the first FLIR Cx-Series thermal camera to offer the FLIR Ignite cloud-based solution. When connected to Wi-Fi, professionals can directly upload, store, and back up images and videos to FLIR Ignite. Professionals can also manage and share the data via email from any mobile device or desktop computer. With all images and videos in one place, sharing data with team members and creating reports for customers is convenient and simple.

Elma Thermo X50 is a smart compact thermal pocket camera, with a resolution of 256x192 pixels = 49,152 pixels. The camera is super easy to operate with point-and-shoot functionality, fixed focus and without a lot of complicated settings. Thermo X50 takes a thermal image together with a 2MP visual image, and saves both images on an SD card in the camera. The images can be transferred to a PC via a USB-C cable, or by inserting the SD card into the PC - an iOS or Android app can be downloaded for free where you normally download your apps, and the images can be transferred wirelessly to a Smartphone or Tablet via Wi-Fi.

You can download a user-friendly analysis and reporting software for free on our website, and with Thermo X50 it is easy to document temperature-related work tasks in a professional manner - without the big investment, and without having much experience in the mysteries of thermography. The built-in rechargeable Li-ion battery is charged via USB-C - charger can be purchased separately, or you can use the PC or a standard Smartphone charger with USB-C cable.

Elma Thermo X50 comes ready to use in a box with USB Type-C cable, 32GB SD card, wrist strap and manual.

Black 200cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +450°C Size: 130x5 mm

Universal power adapter for various instruments.

Type 121039, super thin test pin which is ideal for eg multi-plugs and other plugs where there is not much space. For mounting on 4mm banana plug, 1000V / 30A. Complies with IEC 61010-1 CAT III 1000V.

CA 703 multimeter Produkt beskrivelse: CA 703 er et smart kompakt multimeter med auto-range. Instrumentet har stort display og måler spænding og strøm...

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +900°C Size: 130x8 mm

HIK Pocket2 termisk lommekamera 256x192px -20~400C Produkt beskrivelse: HIKMICRO Pocket2 er et smart og super kompakt termisk lommekamera med en termi...

Elma 3039 is a true RMS clamp meter in a handy design for easy measuring of både AC and DC currents. The instrument has a extra good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3039 has low pass filter and "Inrush" for measuring of inrush currents. With the "Volt sense" function is it possible to detect voltage - without contact. The instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteris and manual. Technical data: Current AC/DC: 0-60-300A Resolution: 0,01-0,1A Accuracy: ±1,5% + 5 D Display: 3 5/6 digits Max. display: 5999 Clamp size: 24 mm Batteries: 2x1,5V LR44 (incl.) Size: 147x60x31 mm Weight: 100 g

Type 1060, multi-blade 4 mm banana plug for screw mounting, 36A. Technical data: IEC 61010: 33V AC / 70V DC

Metrel MI2093 Line Tracer is a complete cable tracer kit, for tracing on hidden cables and wires. The kit consists of a transmitter unit, which can be used on installations with and without present voltage, and a receiver with adjustable sensivity. The transmitter is forced by batteries and can be used to trace/follow cables both with and without voltage. Line Tracer will easily find a disconnected wire, plugs, sockets and more. If you connected to a cable with present voltage is it possible to follow/identify the cable throughout the net supply. The tracer will indikate if it is working on an installation with or without voltage, and if the battery voltage is to low. The receiver indicates how strong a signal it will catch reflected by diods og by sound signals. On the receiver is it possible to choose between three levels of sensivity, this will secure a more accurate tracing. With the special designed selective/high sensitive probe, you are able to identify fuses in boards

Elma 608 is an easy and small IR thermometer made in a practical pen size – fits right in the shirt pocket. The instrument measures surface temperatures without contact. Easy and fast. Elma 608 is provided with a unique circular laser marking, making the area of measurement clearly visible. Furthermore the instrument is equipped with min/max/hold function and a clear, backlit display. The instrument is delivered ready to use including batteries.

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50...+1100°C Accuracy: ±0,4% eller ±1,5°C, or what is highest Size: 130x3 mm

Elma DT802D, CO2 / Relative Humidity / Temperature Monitor measures the indoor climate and displays the measured values directly in the display, and can also log the values over a period of time, the period depending on the log range (32,000 values). The monitor is ideal for measurement at schools, institutions, meeting rooms, offices, etc. Poor indoor climate can cause unpleasant genes such as headache, fatigue and impaired concentration. Here you can measure the concentration of CO2, get a good indication of whether the load in the room is appropriate in relation to room size and ventilation.

Inst,sæt Elma 805+BM031+Taske Produkt beskrivelse: Smart sæt med 2 stk. uundværlige basisinstrumenter fra Elma Instruments.Instrumentsæt bestående af:...

Test lead kit, red/black, with every kind of accessories, all in all 18 parts, including test probes, crocodile clips, banana plug, adapter, flexible grab clip and more. All the accessories are made in highest quality, and is delivered in a practical hard case. Technical data: IEC 61010: Cat II 1000V

Elma BM076 is a robust true RMS clamp meter, which is specially suitable for everybody who works with water, heat and ventilation. With this handy clamp meter is it possible to measure currents up to 600A and the multi meter function makes it possible to measure voltage, frequency, capacity, resistance and continuity. Furthermore the instrument is equipped with temperature measurement, together with a standard type-k probe, makes it possible to measure temperatures on many applications. As something quite new Elma BM076 has build-in 3-lead fase sequence and a smart motor rotation indicator, which is able to help with mounting motors properly. Another new function is VFD, which make the instrument able to measure true values of frequency and voltage after frequency converters. The AmpTip function makes it possible to measure currents from 0-60A with a great accuracy. Elma BM076 has a big backlighted display and is equipped with datahold, peak-hold, max/min/avg, relative function and voltage detector. Elma BM076 is UL listet and complies with IEC 61010-1 CAT IV 300V and III 600V and is delivered in a bag incl. temperature probe (-20 to 250°C), test leads, battery and manual. Technical data:Current with clamp: 0-60-600A ACResolution: 0,01-0,1AAccuracy: ±1,8% + 5DCurrent AmpTip: 0-60,00ACurrent through connections: 0-200-2000microA DCVoltage: 0-600.0V AC/DCFrequency: 5Hz–1000HzTemperature: -40...400°CCapacity: 0-200-2500FResistance: 0-600-6k-60kContinuity test: <100 acustical signalDisplay: 3 5/6 digitMax display: 5999Clamp size: 30mmBattery: 2x1,5V LR03 (incl.)Size: 222x76x37 mm

Kyoritsu 2433R is a new and handy True RMS clamp meter, which is special suitable for measuring on leakage current also on not sinusidal curves. Kyoritsu 2433R is perfect on places where the need of a clamp is necessary to measure small AC currents with great accuracy ie. lead/leakage currents. The instrumentet is equipped with peak hold for holding of peak values, data hold for holding of current values, frequency filter for filtering on unwished frequencies and auto shut off function. THe instrumentet complies with IEC 1010-1 CAT III 300V and is delivered in a pouch incl. batteries and manual. Technical data: Measuring range: 0-40mA-400mA-400A AC Resolution: 10-0,1m-0,1A Accuracy: +/- 1%+5D Display: 3 34 digits Max display: 3999 Clamp size: 40 mm. Battery: 2x1,5V LR03 (incl.) Size: 185 x 81 x 32 mm. Weight: 270 g

Blue, Banana plug type 3260 is a series of IEC 1010 CAT III 1000V 36A plugs, which are able to have in many kinds and colours, all in safety designs and for banana plug with a safety hood. The plugs are mounted in a Ø12 mm hole and is tighten on the back with a nut. Type 3265 with threaded rod and 2 nuts for fastening the wires. Type 3266 for spade connectors or solder connection.