Elma Instruments Instrument

MultiScanner HD900c OneStep multifunction stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.

Zircon HD70 Stud and Steel Rule Finder Product Description: Zircon HD70 OneStep® is a smart and practical tool for quickly locating wooden and metal studs. The stud finder has a display that indicates signal strength and the location of the instrument in relation to the stud. As something completely new, the tester lights up red precisely when the center of the stud is found. When dangerous AC voltage is detected, the instrument warns with a clear sign in the display. The instrument comes with an operating manual.

Technical specifications:

• HxWxD (mm): 180x74x34
• Weight (grams): 159
• Battery type: 9V 6F22 (not included).

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

Elma DT-128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures the moist 20-40mm n the material. Just hold the ball-tip against the surface and the moist is immediately shown in the large, backlit display. Elma DT-128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use incl batteries and manual. Note: The material to be measured should be at least 20-40mm (depending on the material) to provide a reading.

Elma 2700X spændingstester med åben strømtang Produkt beskrivelse: Med Elma 2700X genopfinder Elma spændingstesteren, endnu engang. Elma 2700X har all...

Elma 2000X is the market's smartest voltage tester. The second generation has improved in several aspects, including smart fastening test pens, with accurate distance between them, so that they fit directly into the wall outlet. The test probes has both 2 and 4mm diameter, which ensures good connection. Elma 2000X has many extra features that makes everyday work easier and safer. The instrument is fully automatic, switching between the different functions and can not fault controlled. - Voltage Test - 2 pole with LED indication 12-690 V AC / DC - Phase indicator - a voltage test indicates phase with LED and audible signal - Phase rotation test - 2-poled 3-phase networks - Continuity test - With LED and audible signal - Built-in lighting - Ideal when working in dark locations - High safety - IEC 61010-1 CAT IV, double insulated, IP 65, EN 61243-3 Class B - Suitable for Laus-work , Elma 2000A is equipped with practical highly flexible cord has a protective cover and is delivered incl. Danish manual and standard batteries. Voltage indication also works without batteries. Technical data: Voltage indication: 12, 24, 50, 120, 230, 400 and 690V AC / DC Test current: <3.5 mA Phase indication: 100-690V AC Continuity test: 000 to 400 k Phase Sequence: 2 pole principle, 200-690V AC Safety: IEC 61010-1 CAT IV 600V, IEC 61243-3, Class B (1000V) Double Insulated, IP 65 Battery: 2x1, 5V LR03 (included) Dimensions: 241x68x28 mm Weight: 230 g

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

Elma 106 indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Technical data: Voltage range: 100-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 144x17 mm Weight: 50 grams

Test lead kit with ø2/4mm probes and angle connections. IEC 1010-1 CAT. IV 1000V.

Elma1500B is a new small and handy tester with 3 Features: - Test voltage 12-690 V AC / DC, 2-pole with LED indication - Analysis Test with both audible and visual indication - Unipolar phase indication The tester has smart fastening testprobes with 19mm spacing to fit directly into the socket and enables one-hand operation. The instrument has no buttons and switches automatically between the different functions so that it can not be error controlled. Elma 1500B uses standard batteries, and for extra security work voltage test function even without batteries. Elma 1500B are in abundance class IP 54 and meet particular IEC 61010-1 CAT IV 300V and CAT III 600V and EN 61243-3. Technical data: Voltage test: 12, 24, 50 and 120, 230, 400 and 690 V AC / DC Frequency: 0-65 Hz Continuity: 0-200 k Voltage: 100-690 V Battery: 2 x 1,5V LR03 (Inclusive) Dimensions: 205x67x27 mm. Weight: 130 g

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. • Voltage test, 2 pole with LED s (12-690V AC/DC) • Voltage measurement with digital displaying (7-800V AC/DC) • Voltage detector, one-pole voltage test which indicates the phase • Fase sequence test, 2 pole for 3 phase supply • Continuity test with LED and acustical signal • Real voltage test also without battery • Automatical self test function. • Automatical On/Off – no buttons. • Build-in extra powerfull flashlight. • Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 – 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

With this smart magnetical probe, the test lead automatically will be fixed on the measuring point, without any help from tools etc. Fits into a 4mm banana plug. Complies with IEC 61010-1 CAT III 600V. Technical data: Current: Max 2A Diameter: Ø6,6mm. IEC61010: Cat IV 600V, Cat III 1000V

Elma Volt Test Wide is a super sensitive proximity tester indicating voltage down to 12V AC. The instrument indicates without electrical and metallic touch, easy and secure AC voltage. When there is voltage (phase) present, it is indicated by a sharp and clear orange light. Elma Volt Test Wide meets IEC 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Elma Volt Test Wide is ideal for monitoring example.: - Fuses, without being taken out. - Pick Secure sockets without separation. - Cables and wires, finds any. breaking through the mantle. - Daisy chains, find any. defective lamps. - Does the stage, even in large cable bundles / boards. Technical data: Voltage range: 12-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 146x 18 mm Weight: 40 grams

Elma Volt Stick Bright is putting in new standards for safety and smart voltage detection. Elma Volt Stick Bright is a touchless voltage detector, which without electrical contact easy and safely indicates AC voltage. The tester is managed by a programmable micro processor, and it has a lot of advantages.•The strongest LED light on the market, which also is visible in sunlight. •Clear sound level at voltage indication. •Optional sensitivity 20-1000V and 230V•Powerfull forwarded torch•Automatically self test and battery test•Allways on – can not be operated incorrectly•Multi flat tip – fits in all outletsElma Volt Stick Bright comply with IEC 1010-1 CAT IV 600V, is UL listed and delivered incl. batteries and manual.Technical data:Voltage range: 20-1000V ACBatteries: 2x 1,5V LR03 (incl.)Size: 152xØ17mmWeight: 40g

Smoke pen including 6 pieces of smoke sticks. Burn time: 30min/stick

Elma ACT612 is a new smart battery tester for easy and fasty test of the capacity in 6 & 12V closed lead acid batteries, GEL batteries and car batteries. The instrument makes a 20 hour capacity test in 20 seconds, with display of the battery voltage and the battery capacity directly in Ah. The instrument is able to perform test continuesly without any rest periods to cool down. The instrument is usefull for e.g. cars, motor bikes, alarm systems, UPS systems, telephone communication equipment, tools and more. It is recommended that you normally recharges or change the battery when the capacity is below 65 %. a volt meter is only able to measure the voltage, not the capacity in the battery. This new battery tester is solving this problem by testing both the voltage and the capacity in few seconds. The resultats is displayed on the build-in LCD display. The tester is warning if the poles are not correct mounted on the test leads. Elma ACT612 gets power from the battery and is automatically testing on 6 & 12 V maintenance free/closed lead batteries, GEL batteries and car batteries from 1,2Ah to 100Ah. Is delivered incl. a bag and manual.

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Elma BM878 is a real TRUE RMS CAT IV multi meter with build-in Insulation tester. The insulation tester has five optional test voltages and build-in 200mA ohm (resistance) meter for measuring on equipotential bonding. Elma BM878 is equipped with a big illuminated double display and fast analog bargraph. The instrument measures true RMS voltage, current, frequency, resistance, capacity, diods, continuity and temperature. Elma BM878 has a lot of extra features like. max/min, data hold, auto-shut off, automatically/manual range selection and VFD function, which makes the instrument capable of measuring true values, after inverters. The multi meter complies with EN61010-1 CAT IV 600V and is delivered incl. remote control, test leads, batteries, type-k temperature probe and manual.

Elma BM 257 is a new smart mini mult imeter, which gives two new exiting functions. Auto Check is an intelligent function which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. All you need to do is to turn on the instrument and measure. Low Z is voltage measurement with a low impedance, which means, that the measuring point is loaded, and therefore is it the real voltage you are measuring. The instrument has build-in non contact detection of electrical fields, whick can be used to detect electromagnetical fieds from PC screens, or used as a non contact voltage detector. Elma BM 257 measures true RMS current, voltage, resistance, frequency, capacity, continuity and temperature. Elma BM 257 has backlighted display with analog bargraph for easy and quick reading. The instrument is equipped with automatical/ manual range selection, relative measurement, Peak hold, min/max, datahold and intelligent auto power off. With the PC-communication and the Windows software (extra option) is it possible to make ON-Line data logging. The instrument is very safeand robust. It can handle ffailure connection and is equipped with high efficiency fuses. Complies with IEC 61010-1 CAT III 600V. Elma BM 257 is delivered incl. rubber protection, test leads, temperature sensor (wire sensor -50 til +250°C), battery and manual Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-3000F Frequency: 10Hz - 50kHz Temperature: -50...1000°C, (included wire probe -50...250°C) Diode test: 0-1000mV, 0,56mA < 1,8V DC Continuity test: < 10 akustical signal Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Elma BM 829 has a lot of new smart functions as "Auto Check" and "Lov Z" and a IEC 61010-1 approval for CAT IV 1000V. Auto Check is an intelligent function, which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. Everything you have to do is to turn on the instrument, and make a measurement. Low Z is voltage measurement with low impedance, which means that the measuring point will be loaded, and therefore you will asure that it is the real voltage that you are measuring. Elma BM 829 is equipped with a large backlighted double display and quick analog bargraph. The instrument measures true RMS AC+DC voltage, current, frequency, resistance, capacity, diods, continuity and temperature. Elma BM 829 has a lot of extra functions like 1ms crest/peak hold, max/min, relative measurement, data hold, auto shut-off, automatically/manual range selection and RS 232 port for PC-communication. The instrument has build-in non-contact detection of electrical fields, which can be used to detect electromagnetical fields from PC screens or as non-contact voltage detector. With PC-communication and Windows software (ordered separately), is it possible to make ONLine data logging. The measured results can be displayed as: Digital display, analog display, curve/graph and table. With the instrument connected to a PC data can be stored in intervals from 1 second to 1 hour. Elma BM 829 is UL listed and complies with IEC 61010-1 CAT IV 1000V. The instrument is equipped with high efficient fuses and is delivered incl. manual, temperature sensor (–50...250°C), battery, test leads and rubber protection. Technical data: Voltage: 0-100m-1000m-10-100-1000V AC/DC Accuracy: DC: ± 0,08%+2D, AC: ± 0,5%+3D Band width: 20 kHz Current: 0-600-6000-60m-600m-6-10A AC/DC Accuracy: DC: ± 0,2% + 4D, AC: ± 0,6% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-6000-27mF Conductance: 0,01 – 100nS Frequency: 10

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

Elma 9200BT is a rugged TRMS AC/DC clamp meter equipped with build in Bluetooth. The instruments measures current, voltage, frequency, capacity, temperature, duty-cycle, resistance and continuity. Furthermore the instrument has a dedicated setting for external current clamp to measure as much as 3000A AC (Elma flex 430).Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 9200BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 9200BT is equipped with a large, back lit display and has built in LED torch light, voltage detector, data hold, rel/max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, temperature wire sensor, batteries and manual.

Kyoritsu 1030 penmultimeter Produkt beskrivelse: Kyoritsu 1030 er et pen-multimeter, udformet så det kan betjenes med en hånd. Instrumentet måler AC/D...