ABB Komponenter för switchboxar och skåp - sita 4

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Shaft for selector type handle.

Phase sequence relay CM-PFE, width 22.5mm, measuring range L1-L2-L3=208-440VAC, powered by measuring circuit, 1 c/o (closed circuit principle)

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 13A Rated Residual Current: 30 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide con

Accesories for switch1 NC + 1 NOSuitable for:OT16OT25OT40OTM40OT63OTM63OT80OTM80OT100OTM100OT125OTM125OT45OT63F_COT80F_COT125F_COT100F_COTM40_CMOTM63_CMOTM80_CMOTM100_CMOTM125_CM

The no auxiliary contacts break before the main contacts open - early break

ABB DS201 C10 AC30 strömbrytare Jordfelsbrytare 1P+N

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

The no auxiliary contacts break before the main contacts open - early break

Handle and shaft must be ordered separatly.

Contactor 30KW, 400V AC, 65A AC3, 3 poles, controlvoltage 100...250V AC/DC

Selector type handle. Indication I-O and ON-OFF. No separate shaft needed. Padlockable with max. 3 padlocks, IP 65, hole distance 36/48 mm, NEMA 1, 3R, 12, red-yellow, OT16...125FT

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Auxiliary Contact Block for AF-contactors

Shaft for selector type handle.

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

System pro M compact S200 miniature circuit breakers are current limiting. They have two different tripping mechanisms, the delayed thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. They are available in different characteristics (B,C,D,K,Z), configurations (1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the product range S200 comply with IEC/EN 60898-1, IEC/EN 60947-2, UL1077 and CSA 22.2 No. 235, allowing the use for residential, commercial and industrial applications. Bottom-fitting auxiliary contact can be mounted on S200 to save 50% space.

HKF1-11 Auxiliary contact 1NO/1NC, for manual motor starter MS116, MS/MO132, MS/MO165 , front mounting

ABB CP-E 24/0.75 eladaptrar inomhus 18 W

HK1-11 Auxiliary contact 1NO/1NC, for manual motor starter MS116, MS/MO132, MS/MO165 , mounting right side

Accesories for switch

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.