ABB Komponenter för switchboxar och skåp

The ESB25..N installation contactors are used to control single and three-phase loads up to 25 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

ABB ESB16-20N-01 Kontaktor

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The ESB20..N installation contactors are used to control single loads up to 20 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 10A Rated Residual Current: 30 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

Residual current circuit breaker with overcurrent protection (RCBO) 3P+N. Tripping: A type 16A Rated Residual Current: 30 mA Terminals: 25mm2 Operating temperature: -25C to +55'C Width: 4 modules 71mmTrigger IndicatorIn the event of a ground fault trigger,a blue flag appears on the shift.This feature helpstroubleshooting and reducing downtime.

The no auxiliary contacts break before the main contacts open - early break

Manual change-over switch, I-O-II -operation. Include terminal clamps, IP20.

Manual change-over switch, I-O-II -operation. Include terminal clamps, IP20.

The ESB20..N installation contactors are used to control single loads up to 20 A and can be operated by AC or DC voltages. These contactors are made for use in household applications as well as in industrial environments.The following benefits are provided: Hum-free operation, low power consumption and integrated overvoltage protection. Various contact combinations and accessories are available.

For shaft diameter 6 mm, door drilling 22.5 mm. Indication I-O and ON-OFF. IP54 handles, NEMA 1

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

HKF1-11 Auxiliary contact 1NO/1NC, for manual motor starter MS116, MS/MO132, MS/MO165 , front mounting

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

This modular socket allows the connection of devices, tools or electrical and electronic non modular equipments in civil and industrial electrical switchboards.

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.

Automatisk kretsbrytare (kan monteras på DIN-skena), AC 230/400 V

Accesories for switch

ABB DS203NC strömbrytare Residual-current device with overcurrent protection (RCBO) Typ A 3+N 1 modul/-er

The no auxiliary contacts break before the main contacts open - early break

Contactor 30KW, 400V AC, 65A AC3, 3 poles, controlvoltage 100...250V AC/DC

Shaft for selector type handle.

Selector type handle. Indication I-O and ON-OFF, for shaft diameter 6 mm, door drilling 22.5 mm. IP 65 handles, padlockable with max. 3 padlocks with bail diameter 5...8 mm, door interlock in ONposition, defeatable, NEMA 1, 3R, 12, red-yellow, OT16...125F

Front operated switch-disconnector. Types OT 16...125 include protected terminal clamps, IP 20.