Instrument - sita 9

Rechargeable Lithium battery 3,6V ER14505 AA

Elma BM789 multimeter, TRMS i slankt design Produkt beskrivelse: Elma BM789 er et slankt multimeter med høj båndbredde på hele 100kHz og sand RMS måli...

Elma Multimeter Magnetsæt - Hæng dit måleinstrument som du vil Produkt beskrivelse: Elma multimeter magnet er et super kraftigt sæt som gør det muligt...

Elma 46 is a easy and very econimical instrument for fast failure finding on LAN and Coax installations. The right solution for the professional user who wants a little bit more, than just test the cable. By one push on the TEST button the instrument will measure cable length and full wiremap (pin connection) with control for both short curcuits, break downs, swithed and splitted pairs. A lot of the above failures can even be tested before you have attached your remote in the opposit end. The result is clearly been shown in the large display. The instrumentet is evenmore able to save up to 100 testsresults in the memory. Elma 46 is together with the numbered remote ID s, perfect for determination of mismatched cable installations. A row of terminator ID’s is mounted in the patch panel. When the instrument is doing the cable test i the opposit end, it will show which terminator ID it is looking at. Elma 46 is equipped with a safety circuit which protects against telco rings and loop voltages, if it by a failure is connected to an active telephone line. Elma 46 is delivered with pouch, UK manual, adapter cable and terminator ID#1. Technical data: Cable length: 0,5-350 m Resolution: 0,5m Accuracy: 5% + 1 m Memory: 100 measurements Safety Curcuit: Withstand telco voltage and loop voltage Connector: RJ-45, BNC Cable types: PDS (UTP, FTP, STP), Coax Battery: 6 x 1,5V LR 03 (Incl.) Size: 152 x 72 x 35 mm Weight: 360 g

5,70331766e+12

Brennenstuhl BN-PM231 Elektronisk Plug-in Grå

Elma 315 humidity/thermometer

Battery pack 7.2V NiMH rechargeable for Davo-Meg 1002 & Digi-Meg 1003 (produced after 1.1.2004 from series no. 38401040116)

Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) Conforms to EN61010-031 One-year warranty Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Exposed probe tip length: 19 mm to 4 mm (0.75 inch to 0.16 inch) Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft) TL175 and TL175E also available. TL175E includes removable 4 mm lantern tips that thread onto the lead tip.Conforms to EN61010-031

Elma 6400 is a robust LCR meter with many areas and functions. The instrument has a large dual display with bar graph and backlight that clearly shows the exact measurements. Elma 6400 finds itself in the right area with intelligent autorange - it couldn't be easier. The instrument is suitable for checking various electronic components and for testing coils and motor windings.

Wiresensor Type-K for 4mm bananaplugs

With this smart magnetic probe, the test lead automatically locks to the measuring point without using tools and without loosening clamps. Fits 4mm bush on standard 4mm track. The Elma Magnetic Test Probe complies with IEC 61010-1 CAT II 1000V

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50...+1100°C Accuracy: ±0,4% eller ±1,5°C, or what is highest Size: 130x3 mm

Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

Blue 200cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Red 100cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Type 1060, multi-blade 4 mm banana plug for screw mounting, 36A. Technical data: IEC 61010: 33V AC / 70V DC

Type 5004, extra powerfull, isolated crokodile clip, 1000V/20A. Technical data: IEC 61010: Cat III 1000V

The SparOmeter is a energy meter which can be connected directly in the socket, and will nice and easy show the energy on all 230V appliances up to 2300W/10A. The meter has a lot of features: V, A,W, min.W, max.W, kWh and running time. The SparOmeteret can be set to a measuting period on 1, 7, 30 days or continuesly, the meter will remember the values when disconnected. Technical data: Voltage: 230V AC Current: 10A AC Power: 2300W Accuracy: Class 2 Size: 138x69x75 mm Weight: 180 g

ELMA CM01 has a small clamp meter in a very handy design. The instrument has superior resolution and both 3 3/4 digit display and analog bar graph. ELMA CM01 is equipped with automatic zero adjustment, min / max memory, data hold and measures current AC / DC, voltage AC / DC, resistance, frequency and continuity. The instrument complies with IEC 61010-1 CAT II 600V and CAT III 300V and is delivered complete in bag incl. test leads, battery and instruction manual. Technical data: Current AC / DC: 0-40-200A Resolution: 0.01 to 0.1 A Accuracy: ± 1% + 2D Voltage AC / DC: 0-400V Resistance: 0-400 Frequency: 0-1000kHz Display: 3 3/4 digit Max display: 3999 Clamp width: 24 mm Battery: 2x1, 5V LR6 (incl.) Dimensions: 180x50x29 mm Weight: 200 g

Fluke T5-H5-1AC II KitThis kit includes:Fluke T5-1000Fluke 1AC IIH5Kits ComponentsH5Electrical Tester Holster (Fluke T3/T5)Fluke 1AC IIVoltAlert Voltage DetectorVoltbeatTM technology and continuous self-test so you always know it's workingUpon detection of voltage, tip glows and beeper soundsCAT IV 1000 V for added protectionExpanded range: 90 V to 1000 V acFluke T5-10001000V Voltage, Continuity and Current TesterAll models include:4 mm detachable probes

Habotest HT206A digital clamp meter
The functional clamp meter by Habotest guarantees precise measurement, the results of which are displayed on an easy-to-read, backlit LCD screen. The size of the jaws is up to 26mm, which allows for comfortable operation of the device. The HT206A is also equipped with a flashlight, which makes it easier to work in dark rooms.

Measures various parameters
With this universal meter you can check the value of many different parameters. Using the HT206A, you can measure AC voltage, AC current and resistance, among other things. But that's not all! You can also easily check continuity and true RMS.

Clear, practical display
The meter is equipped with an LCD display with backlight in 2 colors. You will find on it not only the measurement results, but also for example a low battery indicator. This way you can comfortably use the HT206A. What's more, the backlight will turn orange when the measured voltage exceeds 80V and the measured current exceeds 3A.

Easy to use in all conditions
The built-in flashlight provides bright illumination, so you can work even in dark places with ease. The operation of the device is also facilitated by intuitive buttons, with which, among other things, you can quickly and conveniently select the function, use the MAX/MIN measurement option, as well as turn the light on or off. An additional advantage of the meter is the option of storing data.

Neozed DO1 fuse, 16A, 5 pcs.

The smart digital multimeter from Habotest is distinguished by its high precision and use of practical solutions. The HT122 is lightweight and compact, offering an easy-to-read display, flashlight and SMART functions. It is powered by 2 AAA batteries.