Instrument - sita 10

Elma Laser R107 Modtager Produkt beskrivelse: Detektor til hele Elma x360 serien.Detekterer grøn linjelaser med pulsfunktion på afstande op til 50 met...

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

Lan Tester VDV II bluetooth Produkt beskrivelse: VDV II Bluetooth serien har alle fået Bluetooth og kan derved lave wiremap rapporter. Når VDV II Blue...

Habotest HT651D infrared thermometer guarantees unparalleled precision of measurement. With its help you not only measure the temperature of a specific point, but also check the ambient temperature, dew point and relative humidity. The color display makes working with the device easy and the included K-type thermocouple gives even more possibilities. The thermometer also has an alarm function. It requires a 9V 6F22 battery to power it, which must be purchased separately.

Habotest HT127B digital multimeter is a multifunctional device that will prove useful during electrical work. The product allows you to measure voltage, resistance, capacitance and many other parameters. The multimeter has an easy-to-read display that allows you to conveniently read the measurement results, plus it is equipped with a flashlight and practical buttons.

HIKMICRO ECO-V is a super compact and competitive thermal camera that weighs only 350 grams and has a thermal resolution of 96x96 pixels. ECO-V stores real radiometric thermal images as well as visual image in the built-in memory. The camera has a thermal sensitivity of less than 50 mK and is suitable for troubleshooting, checking or documentation in connection with temperature-related tasks. The camera has a temperature range of -20°C - 550°C, and displays the thermal image on a 2.4" LCD screen.

Type 121039, super thin test pin which is ideal for eg multi-plugs and other plugs where there is not much space. For mounting on 4mm banana plug, 1000V / 30A. Complies with IEC 61010-1 CAT III 1000V.

Habotest HT625B anemometer
HT625B is a functional and compact anemometer with high sensitivity. It is equipped with an 8-blade rotor and HD color display. It requires 3 AAA 1.5V batteries to power it. It allows you to take measurements in different units. You can also connect it to a computer via a USB cable for real-time data management.

Precise measurement of various parameters
This multifunctional anemometer accurately measures not only air velocity, air volume (CFM, SMM, CMS) and humidity, but also air temperature, wet thermometer and dew point. It also allows you to take average measurements. You gain access to individual functions and settings by pressing specific buttons. Habotest meets the expectations of users around the world. The ability to change the unit of measurement will allow you to adapt the device's operation to your needs and habits. Available options include m/s, km/h, miles/h, ft/s and even knots. The device is distinguished by its high sensitivity and responsiveness of 0.5 seconds.

Ease of use
Operation of the HT625B is surprisingly simple. The device features practical buttons such as an on/off switch and a function toggle key, as well as buttons that allow you to select the parameter unit and the value you want the device to calculate (minimum / maximum / average) and a button that allows you to store data. The anemometer also has an 8-blade rotor with a bearing sensor, a high-resolution color screen and a USB port.

Convenient access to information
The anemometer is equipped with an easy-to-read HD color display that can display units with a maximum value of 9999. It provides convenient access to the most important information related to the operation of the device. It allows you to quickly check not only the measurement results, but also the battery status, for example. You can also gain more convenient access to data and manage it in real time - the HT625B can be connected to a laptop or computer via USB. Take advantage of this opportunity to work even more comfortably, yet efficiently.

Practical, portable, convenient to use
HT625B is not only functional, but also lightweight and handy. Using it is extremely comfortable. It fits perfectly in the hand and does not cause discomfort. Its transportation will not cause you any problems either - it measures only 197 x 60 x 33 mm, so you can easily fit it into your bag and take it wherever you need it. The product will be great for meteorology, industry, hydrology and urban environments, among others. It will also be useful for those involved in environmental protection.

Included:
Digital anemometer x1
AAA 1.5V battery x3
User manual x1

Elma BM878 is a real TRUE RMS CAT IV multi meter with build-in Insulation tester. The insulation tester has five optional test voltages and build-in 200mA ohm (resistance) meter for measuring on equipotential bonding. Elma BM878 is equipped with a big illuminated double display and fast analog bargraph. The instrument measures true RMS voltage, current, frequency, resistance, capacity, diods, continuity and temperature. Elma BM878 has a lot of extra features like. max/min, data hold, auto-shut off, automatically/manual range selection and VFD function, which makes the instrument capable of measuring true values, after inverters. The multi meter complies with EN61010-1 CAT IV 600V and is delivered incl. remote control, test leads, batteries, type-k temperature probe and manual.

The Habotest gas leak detector is characterized by high sensitivity and accuracy. With its help, you will quickly make a measurement, the result of which will be displayed on a clear, color LCD screen. HT601B also has a sound alarm. The HT601B is handy and durable - it will prove useful in many applications. It requires 3 AAA 1.5V batteries, which must be purchased separately.

kraveværktøj i kuffert VFT-808-MIS Produkt beskrivelse: Fint kraveværktøj fra Value, der kommer i kuffert, et godt supplement til ens eksisterede udst...

FNIRSI GD-02 Detektor för brännbara gaser med färgskärm

FNIRSI GD-02 är en modern detektor för brännbara gaser som kombinerar hög mätprecision, ett brett detekteringsområde på upp till 50 000 ppm, en tydlig 2-tums IPS-färgskärm, en flexibel 36 cm lång sond och avancerade larmsystem. Redan från de allra första sekunderna ger den snabba och tillförlitliga resultat, registrering av larmdata, visualisering av koncentrationsförändringar i realtid samt användarvänlighet både dagtid och nattetid. Det är ett verktyg utformat för säkerhet, bekvämlighet och full kontroll.

The FNIRSI 1014D 2-in-1 oscilloscope signal generator is a compact digital measurement instrument designed for electronics diagnostics, development, education and repair applications. It integrates a dual-channel oscilloscope with a built-in DDS signal generator, enabling both waveform analysis and signal output within a single device. The oscilloscope provides 100 MHz bandwidth with 1GSa/s sampling and 1 MΩ input impedance for accurate signal capture. A 7-inch 800×480 TFT display ensures clear waveform visualization. Advanced functions include FFT analysis, X-Y mode, auto measurement and cursor tools. Internal memory supports storage of up to 1,000 waveforms and screenshots, with USB export for external processing and documentation. The device supports stable operation across a wide range of electronic testing scenarios.

The Fluke TPAK ToolPakTM Magnetic Meter Hanger allows you to hang your meter on nails, hooks and many other objects so you can take your measurements hands-free. The kit includes powerful magnetic hanger, 9 inch hook and loop strap, a hook hanger and a general purpose hanger. Solves any hanging and positioning problem you may face. Attaches to most Fluke meters.Fluke TPAK ToolPakTM Magnetic Meter Hanger Kit includes:9 inch hook and loop strapUniversal hanger clipHook hanger for non magnetic surfacesStrong magnet

Illuminates by direct contact of live conductor.Diameter 13 mm.Length 105 mmWeight 16 gr.

Standard Sensor - Type K Ni-CrNi Technical data: Measuring range: -40 .... +250 ° C Accuracy: ± 1.5 ° C Dimensions: 1000x2 mm

Elma BM076 is a robust true RMS clamp meter, which is specially suitable for everybody who works with water, heat and ventilation. With this handy clamp meter is it possible to measure currents up to 600A and the multi meter function makes it possible to measure voltage, frequency, capacity, resistance and continuity. Furthermore the instrument is equipped with temperature measurement, together with a standard type-k probe, makes it possible to measure temperatures on many applications. As something quite new Elma BM076 has build-in 3-lead fase sequence and a smart motor rotation indicator, which is able to help with mounting motors properly. Another new function is VFD, which make the instrument able to measure true values of frequency and voltage after frequency converters. The AmpTip function makes it possible to measure currents from 0-60A with a great accuracy. Elma BM076 has a big backlighted display and is equipped with datahold, peak-hold, max/min/avg, relative function and voltage detector. Elma BM076 is UL listet and complies with IEC 61010-1 CAT IV 300V and III 600V and is delivered in a bag incl. temperature probe (-20 to 250°C), test leads, battery and manual. Technical data:Current with clamp: 0-60-600A ACResolution: 0,01-0,1AAccuracy: ±1,8% + 5DCurrent AmpTip: 0-60,00ACurrent through connections: 0-200-2000microA DCVoltage: 0-600.0V AC/DCFrequency: 5Hz–1000HzTemperature: -40...400°CCapacity: 0-200-2500FResistance: 0-600-6k-60kContinuity test: <100 acustical signalDisplay: 3 5/6 digitMax display: 5999Clamp size: 30mmBattery: 2x1,5V LR03 (incl.)Size: 222x76x37 mm

Set of Elma 711 Thermometer Type 101 surface sensor Type 116 Air sensor Elma 711 is our well known, rugged thermometer with rubber protection and table stand, suitable for all branches. Furthermore 99 values can be saved in the memory, easy to scroll through, using the arrow keys. Elma 711 is the simplest in the 71x series, very easy to use and compatible with type K thermocouples, the most used type in industrial applications. Elma 711 is designed ergonomically, to use all functions with one hand and the large display is easy readable. The instrument offers max/min hold, selectable units °C/°F and resolution of 0.1 or 1 °C/°F. Elma 711 is delivered ready to use incl. rubber protection, batteries, TP01 wire sensor (-50°C...250°C) and manual. Please find a selection of sensors in the Accessories tab.

4 x 35A fuses
DIII 500 V gL / gG

Glass fuse - slow, 4A - 10 pack

Laserbrille for grøn laser Produkt beskrivelse: Dæmper alle andre farver, men lader den grønne farve, fra f.eks. Elma kryds- og linjelasere, skinne kl...

Software topview med PC kabel Produkt beskrivelse: Topview Software inkl. USB kabel Tekniske specifikationer: Vægt (kg): 0,3Brand: HTType: Software

Sakerhetstestpinnset 405 from Elma

The normal test leads are typically 1-2 meters, this is not always enough. For example, The statutory measurement of continuous electrical connection in protective conductors and in equalization connections often requires very long test leads.Elma offers a variety of solutions with test leads mounted on a practical cable drum, which ensures that the line is always in order and it is easy to roll out the required length. IEC 61010-1 cat. II 250V.

Elma 641 Easy Flex Leakage detector for airpressure, gas installations and more. Including bag og earphones.