Instrument - sita 11

The Fluke T6-600 is an electric multi-tester perfectly adapted to the electrician's daily work. With the built-in fork, measurements of both current and voltage can be made without electrical contact with the measuring object. Fluke FieldSense technology measures voltages of up to 600V AC, which are displayed on the built-in display, without the need for test leads. Current up to 200A is easy measured via the built-in fork. Fluke T6-600 builds on the very popular T5-600, and offers news like resistance measurements up to 1000, frequency measurement, hold function, traditional AC / DC voltage measurements up to 600V, backlit display, etc. As an accessory, Fluke TPAK Magnetic Hanger and Holder H-T6 are available. Tested and approved according to EN61010-1 CAT III 600V. Two year warranty.

Air sucking System for faster response and higer sensitivity Microprocessor Control with advanced digital signal processing. Semiconductor gas sensor. High / Mid / Low Leak Sensitivity Selector R-22, 134a Hi : 3g/year , Mid : 15g/year , Lo : 30g/year R-404A, 407C, 410A Hi : 4g/year , Mid : 20g/year , Lo : 40g/year 7 LED Tri-colored Visual Leak Level Indicator Ambient Concentration Reset Warm-up Time: 45 seconds Snake Tube Length: 400mm (15.5) flexible stainless probe Auto power Off: 10 minutes Ambient Concentration reset. Equal Sensitivity to CFCs, HCFCs and HFCs. Low battery indication. Reference Leak source included. Hard Carrying case included.

Glass fuse - slow, 1.6A - 10 pack

Elma 6600 process multimeter is an indispensable instrument for every technician working with control and automation. As Elma 6600 is both a 0-24mA calibrator and standard TRMS multimeter, the instrument is suitable both to supply an automation circuit with an adjustable mA signal and measure when you need an ordinary true RMS multimeter- perfect for troubleshooting. Elma 6600 is supplied with large LCD display with light, automatically turned on when working in dark environment. When used as calibrator, the instrument has 3 main functions: • Supplying a passive current loop 0-24.000mA (internal battery supply 4.5V) • Simulating a 2 wire transmitter in an active current loop 0-24.000mA (External supply 6...48V) • Supplying a transmitter and monitoring the current in the loop (Loop power 24V/20mA) Elma 6600 has many additional functions making the instrument suitable for control and application troubleshooting. The test current can be set at either a locked value 0-24.000mA or run a programmed cycle. Four programmed cycles are available, with different scan/ramp intervals to select the one most suitable for your application. Elma 6600 is also a multimeter with all functions expected in a standard multimeter, like voltage, current, resistance, frequency, continuity with buzzer and diode test. The instrument also supports auto/manual range min/max/avg. and hold/relative. The build in memory is able to save 100 measurements. Afterwards the measurements can be viewed on the display or be transferred to PC. Cable and software are supplied with the instrument. Elma 6600 fulfills IEC 61010-1 Cat IV 600V. The instrument is delivered ready to use, with battery, test leads, crocodile clips, software and USB cable, manual and a strap to hang the instrument, so you have both hands free.

Unique motor tester which is able to test everything concerning motors, generators, frequency inverters and more. TR1000 is measuring the inductance in the motor windings and lead-/ insulation failures, both directly on the motor or through the installation. The inductance measurement is the only safe measuring method, and it gives a much larger safety than a normal resistance measurement. TR1000 is a must have instrument for professional service/troubleshooting and preventive maintenance. Is delivered in a bag incl. batteries, test leads, clips and manual. Technical data: Motor test from: 10W-1000kW Inductance measure voltage: Max. 9V Insulation measurement: 500V Battery: 6x1,5V LR6 (incl.) Size: 95x158x60 mm Weight: 800 g

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The Fluke TL71 Premium Test Lead Set has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V.

The Habotest HT5910 resistance tester is a tool that will allow you to get resistance measurements of power circuits. It offers loop, RCD and AUTORAMP measurements. It has an easy-to-read LCD display that will provide you with quick and clear information about the data obtained.

The FNIRSI DMC-100 digital clamp meter is a multifunctional electrical testing instrument designed for installation, diagnostics and maintenance work. It supports measurement of AC/DC current and voltage, resistance, capacitance, frequency, temperature, continuity and diode testing, along with NCV non-contact voltage detection for safe operation. The 25 mm clamp jaw allows current measurement without circuit interruption. True RMS technology and 10,000-count resolution ensure accurate readings across different signal types. A 2-inch color LCD display provides clear output, while the 1500 mAh rechargeable battery with USB-C charging supports long operating time. Integrated features include data logging, automatic power calculation and a built-in flashlight for low-light environments.

Elma Chrome batteritester Produkt beskrivelse: Med enestående design og funktion simulerer den nye Elma CHROME en 20 timers (C20) afladningstest på 6...

Large white LED backlight to work in poorly lit areasResistance and continuityFrequency and capacitanceMaximum Voltage ac/dc 600V10A ac/dc current measurement (20 A overload for 30-seconds max)Min/Max/Average to record signal fluctuationsCAT III 600 V safety ratedSafety conformanceAll inputs are protected to CE, IEN61010-1 CAT III 600V. UL, CSA, TUV listed and VDE.Includes:HolsterInstalled 9V battery4 mm silicone test lead setUser manual

Test lead set for, among other things, phase sequence test

The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJawTM current lets you check current up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReachTM test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.Voltage Tester Includes: 600V Voltage, continuity and current tester4 mm detachable probesInstruction sheet

Elma 711 is the robust and wellknown thermometer, able to measure temperatures all over the industrial applications. To meet growing wishes from the costumers, Elma 711 is now upgraded with an internal memory function. It is now possible to store the measurements in the memory of the instrument. There is room for 99 measurements in the memory. Elma 711 is thet "smallest" in this serie, and it is equipped with the most common and necessary functions to meet the requirements for a professional thermometer. Elma 711 is designed for type k-probes, whick is the most common probe in industrial applications. Elma 711 has the coorect ergonomical design, that does, that the use of the instrument can be made with only one hand, eventhogh all the extra features which is present in the instrument . The display, with the size 56mm x 53mm makes the reading of the values very easy. The instrument has buttons for max-hold, optional unit°C/°F, display resolution in 1°C or 0,1°C. In the function max-hold, the instrument is measuring continuesly, and the displayet shows the highest temperature present. The “MAX" symbol is in the display. The user freindly buttons are constructed thus a shift between the function are done very easily. Elma 711 shall be used together with type k-probes.

Testprobe black = 140mm

Red, Banana plug type 3260 is a series of IEC 1010 CAT III 1000V 36A plugs, which are able to have in many kinds and colours, all in safety designs and for banana plug with a safety hood. The plugs are mounted in a Ø12 mm hole and is tighten on the back with a nut. Type 3265 with threaded rod and 2 nuts for fastening the wires. Type 3266 for spade connectors or solder connection.

Elma 9200BT is a rugged TRMS AC/DC clamp meter equipped with build in Bluetooth. The instruments measures current, voltage, frequency, capacity, temperature, duty-cycle, resistance and continuity. Furthermore the instrument has a dedicated setting for external current clamp to measure as much as 3000A AC (Elma flex 430).Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 9200BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 9200BT is equipped with a large, back lit display and has built in LED torch light, voltage detector, data hold, rel/max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, temperature wire sensor, batteries and manual.

SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.One pair (red, black) of large alligator clips with nickel-plated steel jawsMulti-purpose tooth pattern grips anything from fine gauge wire to a 20 mm boltRecommended for use with TL222 and TL224 test leadsCAT IV 600 V, CAT III 1000 V, 10 A rating, CCSAUS Rating EN/IEC 61010-031:2002 +A1:2008

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminalsHard stainless steel probe tipsFlat blade design to hold securely in blade type electrical wall socketsCAT II 1000 V, 10 A rating EN/IEC 61010-031:2002 +A1:2008

Give your Fluke tools the protection they deserve. You bought the best, why not protect them with Fluke cases. The C25 carrying case is a durable, zippered carrying case with padding and inside pocket, and high quality polyester exterior. It includes a convenient hand strap and carries most of Fluke’s popular digital multimeters. Our most popular case sold to date! Now available in standard and camouflage designsDimensions (HxWxD)218 mm x 128 mm x 64mm

HT650A will allow you to conveniently measure temperature. It can be used in industry, household and gastronomy. It provides precise measurement and guarantees fast response time - 0.5 seconds. Access to the measurement result is provided by an easy-to-read LED display. It requires 2 AAA 1.5 V batteries for power supply.

Blue 100cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +450°C Size: 130x5 mm

Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.CAT IV 600 V, Cat III 690 V safety rating Fluke’s family of Two-Pole Voltage testers comply with both regulation HSE GS 38 (tip caps) and IEC EN 61243-3: 2010.4 ways to detect ac/dc voltage A clear, instantly visible LED indicator, a bright digital display of the measurement value, an audible continuity test, and vibration to give tactile feedback (vibration indicator on T110, T130, T150).Backlit graduated scale and backlit indicatorsVibration provides tactile feedback (T110, T130, T150).Audio on/off for testing in quiet areas.Low battery indicatorDetects voltage even with discharged batteriesImproved probe docking for secure storagePhase rotation indicator for 3-phase systemsRCD functionality Two-button controls allow you to draw more current from the circuit under test and intentionally trip Residual-Current Devices (RCDs) remotelyDisplay Hold (T130, T150)Built in electric torch (T110, T130, T150)Single-phase voltage offers fast identification of live conductorsPush-on probe tips, probe tip protector and storage accessoryProbe tip protector and storage accessory Tip protector serves as an extra hand when opening UK electrical safety outlets.Resistance testing to 1999 ohms (T150)WearGuardTM insulation shows damage to test leads

The EEx approved Magnet Stick is an instrument for testing for the presence of magneticfields. By simply holding the tip of the instrument near the test area, it indicates a magneticfield by glowing. The test lamp responds to all kinds of magnetic fields, from alternating currentto direct current and permanent magnets. (Sensitivity 300 gauss 0,3 mT). The ATEXand IECEx approvals are confirmed by NEMKO. (II 2G EEx ib IIC T4).APPLICATIONS:– Testing operating solenoid valves in pneumatic and hydraulic control equipment– Testing relays with coils and electrically-controlled solenoid valves in all types of vehiclesand machines– Testing solenoid valves when servicing oil burners

Standard 32A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs