Instrument - sita 5

Kalibrator Elma MS4202 / 0-24mA / 0-10V Produkt beskrivelse: Elma MS 4202 er en lille og håndholdt kalibrator, som både kan arbejde som aktiv og passi...

Habotest HT107D eluttagstestare Kontakt

FNIRSI FDM-02 ljudnivåmätare

FNIRSI FDM-02 är en precisionsljudnivåmätare utrustad med en färgskärm och en högkvalitativ kondensatormikrofon, vilket möjliggör noggranna mätningar av ljudnivåer i olika arbetsmiljöer. Den stöder A/C-frekvensviktning, FAST/SLOW-lägen och en dataloggningsfunktion som genererar grafer. Dessutom kan du övervaka omgivningstemperatur och luftfuktighet. Allt detta gör enheten idealisk för professionella akustiska mätningar, övervakning av arbetsförhållanden och mycket mer.

Diazed DZ2 fuse

Diazed DII Fuse 16A, 5 pcs.

Test lead set for, among other things, phase sequence test

VES-100A kølemiddelvægt 100 kg Produkt beskrivelse: VES-100A er en hel lavpraktisk vægt til kølemiddel, præcis og betjeningsvenlig med opløsning ned t...

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

The Habotest non-contact voltage (NCV) and phase detector provides precise measurement and safe use. Equipped with LCD and sensitivity adjustment button - it is very convenient to use. It offers breakpoint checking, as well as active and inactive cable detection, and automatically shuts off after 3 minutes of inactivity. The built-in LED flashlight will make your work easier. The device is powered by 2 AAA 1.5V batteries.

Range of tests: Cold Cranking Amps (CCA): 100-2000 CCA / Europe-Norm (EN): 100-2000 CCA / International Electrotechnical Commission (IEC): 100-1400 CCA / Cranking Amps (CA): 100-2000 CCA / Deutsche Industrie-Norm (DIN): 100-1400 CCA / Battery Council / International (BCI): 100-2000 CCA / Marine Cranking Amps (MCA): 100-2000 CCA / Japanese Industry Standard (JIS): 126A17-245H52 / GB: 30-220AH

Features: Battery charge test, internal resistance test, start-up test, battery voltage test, load test, real-time voltage monitoring, voltage waveform analysis, anomaly alarms, data storage, ripple test

Equip yourself with the lightweight and handy Habotest HT113 digital universal multimeter, which will allow you to conveniently and safely measure voltage, current, resistance and many other values. Habotest HT113 is equipped with a practical stand, so you can put the product on the shelf. Made of soft material, the casing is pleasant to the touch, but also extremely durable, resistant to wear and fall.

The Ancel AD530 scanner is a comprehensive OBD2 diagnostic tool that provides a wide range of functions to accurately and quickly identify vehicle problems. Equipped with support for all 10 OBD-II service modes, the AD530 is ideal for professional mechanics and advanced home users who need in-depth vehicle diagnostics.

Universal bag Elma Mini - Dimensions 105 x 180 x 55 mm. Ideal for small multimeters, thermometers etc. The bag can be used for many types of instruments. Other sizes are in stock. Call for more information.

The normal test leads are typically 1-2 meters, this is not always enough. For example, The statutory measurement of continuous electrical connection in protective conductors and in equalization connections often requires very long test leads.Elma offers a variety of solutions with test leads mounted on a practical cable drum, which ensures that the line is always in order and it is easy to roll out the required length. IEC 61010-1 cat. II 250V.

Test lead kit for Digi.Meg insulation tester

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. • Voltage test, 2 pole with LED s (12-690V AC/DC) • Voltage measurement with digital displaying (7-800V AC/DC) • Voltage detector, one-pole voltage test which indicates the phase • Fase sequence test, 2 pole for 3 phase supply • Continuity test with LED and acustical signal • Real voltage test also without battery • Automatical self test function. • Automatical On/Off – no buttons. • Build-in extra powerfull flashlight. • Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 – 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

Elma Thermo X150 is a smart compact thermal camera, with a resolution of 160x120 pixels = 19,200 pixels. The camera is super easy to operate with point-and-shoot functionality, fixed focus and without a lot of complicated settings. Thermo X150 takes a thermal image together with a 2MP visual image, and saves both images on an SD card in the camera. The images can be transferred to a PC via a USB-C cable, or by inserting the SD card into the PC.

You can download a user-friendly analysis and reporting software for free on our website, and with Thermo X150 it is easy to document temperature-related work tasks in a professional way - without the big investment, and without having much experience in the mysteries of thermography. The replaceable rechargeable Li-ion battery is charged via USB-C - charger included.

Elma Thermo X150 comes ready to use in a box with USB Type-C cable, charger, 8GB SD card and manual.

The Fluke T6-600 is an electric multi-tester perfectly adapted to the electrician's daily work. With the built-in fork, measurements of both current and voltage can be made without electrical contact with the measuring object. Fluke FieldSense technology measures voltages of up to 600V AC, which are displayed on the built-in display, without the need for test leads. Current up to 200A is easy measured via the built-in fork. Fluke T6-600 builds on the very popular T5-600, and offers news like resistance measurements up to 1000, frequency measurement, hold function, traditional AC / DC voltage measurements up to 600V, backlit display, etc. As an accessory, Fluke TPAK Magnetic Hanger and Holder H-T6 are available. Tested and approved according to EN61010-1 CAT III 600V. Two year warranty.

Always on for faster, safer voltage testing2AC is the latest addition to the VoltAlertTM ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.Voltage detection from 200 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition*Category IV – 1000 V overvoltage rated product for best in class user protectionIntegrated clip design, optimized for pocket storagePowered by 2x AAA batteries (included)Fluke ruggedness and reliability

Neozed DO1 fuses, 13A, 10 pcs.

Robust, digital differential thermometer which is able to measure two temperatures at the same time. The instrument shows temperature 1 and temperature 2 at the same time on the display, or shows the differential temperature. The user freindly buttons are constructed thus a shift between the function are done very easily. The instrumentet has functional buttons for T1 & T2 (T1-T2) max value, hold-function, optional unit, °C/°F, backlighted display and display resolution in 1°C or 0,1°C. In the max/min function the instrument is measuring continuesly. The display is showing the highest, lowest or average temperature present. A symbol placed in the bottom of the display is indicating which value would be shown on the display: max, min or avg. On the left side of the display, there is a watch, which shows the time on the current measurement. Elma 712 is used with type k-probes. The instrument is delivered with rubber protection incl. battery, wire probe and manual. Technical data:

Glass fuse - slow, 1.25A - 10 Pack

Laserbrille for grøn laser Produkt beskrivelse: Dæmper alle andre farver, men lader den grønne farve, fra f.eks. Elma kryds- og linjelasere, skinne kl...

Glass fuse - slow, 3.15A - 10 pack

Glass fuse - slow, 0.63A - 10 pack