Instrument - sita 6

Kyoritsu K 2031is a small clamp meter in never seen and very convenient mini size. The instrumentet measures AC current and is able to, due to it s size, be used almost anywhere - also in places where it should be impossible to measure with a normal clamp meter. THe instrumentet is equipped with data hold, complies with IEC 61010-1 CAT III 300V, and is delivered in pouch incl. batteries and manual. Technical data: Current: 0-20-200A AC Resolution: 0,01-0,1A Accuracy: ± 2% + 5D Display: 3 1/2 digits Max display: 1999 Clamp size: 24mm Battery: 2x1,5V LR44 (incl.) Size: 145x51x25 mm Weight: 95 g

Habotest HT603 is used to measure light intensity in the range of 0~100000 LUX / 0~10000 FC. It will work well in fields such as the electrical industry or for room inspection purposes. It is distinguished by its fast response time, and its rotating probe makes it more convenient to use. What's more, you can also measure the ambient humidity level and temperature with the device. In addition, the HT603 is powered by 3 AAA batteries.

The smart digital multimeter from Habotest is distinguished by its high precision and use of practical solutions. The HT121 is lightweight and compact, offering an easy-to-read display, flashlight and SMART functions. It is powered by 2 AAA batteries.

PJP 2359 - IEC -150 Red & Black, Ø4mm Safety test leads silicone

Power supply for Metrel Eurotest series. Fits to:Eurotest AT, Mi3101Eurotest XA, Mi3105Eurotest XE, Mi3102Eurotest XC, MI3152Eurotest XD, MI3155Eurotest Combo, Mi3125, Mi3125B, Mi3125BT SmarTec, Mi3121, Mi3122, Mi3123 MI2883, 2892

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL224 SureGripTM Insulated Test leads offer reinforced strain relief and includes banana jack termination for a variety of test lead configurations. SureGripTM accessories are designed to improve steadiness in slippery hands. Rubber over molded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.DMM test leads (red, black) with safety shrouded, standard diameter banana plugsRight angle connector on one end and straight connector on the otherReinforced strain relief1.5 meter silicone-insulated wire resists heat & coldCAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

Kyoritsu 8035 is a unique new phase sequence tester which with no elektrical contact is showing phase sequence/magnetic field. The 3 clips are mounted outside on the insulation on three separate phases. When it is three real and different phases then the instrument will show it with big and very bright red and green LED for phase sequence. The instrumentet complies with CAT IV 600V and is because of that, together with the extra bright LED s very usefull for outdoor purpose. Kyoritsu 8035 complies with IEC 61010-1 KAT IV 600V / III 1000V and is delivered in a bag incl. batteries and manual. Technical data: Working voltage: 70-1000V AC Frequency: 45-66 Hz Working temperature: -10.....50°C Clamp size, clip: ø 2,4-30mm leads Battery: 4x 1,5V LR6 (incl.) Size: 112x60x30mm Weight: 380g

4 mm, fully isolated, handy format, for 4 mm banana plug. Technical data: IEC 61010: 33V AC / 70V DC

Test probe to connect in the end of a test lead with banana plug. Specially suitable for use in multi installation testers. Technical data: IEC 61010: CAT II 1000V (without protection cap), CAT IV 600V (with protection cap)

Mini tømmeaggragat R32, 2 kompres, 730W Produkt beskrivelse: VRR-24L-R32 fra Value, er en højt ydende tømmestation, der er anvendelig til mange forske...

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

Lan Tester VDV II bluetooth Produkt beskrivelse: VDV II Bluetooth serien har alle fået Bluetooth og kan derved lave wiremap rapporter. Når VDV II Blue...

FNIRSI GC-02 strålningsdetektor

FNIRSI GC-02 är en modern, bärbar strålningsdetektor som i ett kompakt hölje erbjuder funktioner som vanligtvis återfinns i betydligt större och dyrare enheter. Den detekterar beta- (β), gamma- (γ) och röntgenstrålning med hjälp av ett precisionsräknarrör av Geiger-Müller-typ. Den erbjuder mätning i realtid, dataloggning, intelligenta ljud- och ljuslarm, tidsövervakning, viloläge samt ett inbyggt litiumbatteri som kan laddas direkt. Det är ett pålitligt verktyg för alla som vill ha medveten kontroll över sin omgivning och säkerställa säkerheten.

Elma ACT612 is a new smart battery tester for easy and fasty test of the capacity in 6 & 12V closed lead acid batteries, GEL batteries and car batteries. The instrument makes a 20 hour capacity test in 20 seconds, with display of the battery voltage and the battery capacity directly in Ah. The instrument is able to perform test continuesly without any rest periods to cool down. The instrument is usefull for e.g. cars, motor bikes, alarm systems, UPS systems, telephone communication equipment, tools and more. It is recommended that you normally recharges or change the battery when the capacity is below 65 %. a volt meter is only able to measure the voltage, not the capacity in the battery. This new battery tester is solving this problem by testing both the voltage and the capacity in few seconds. The resultats is displayed on the build-in LCD display. The tester is warning if the poles are not correct mounted on the test leads. Elma ACT612 gets power from the battery and is automatically testing on 6 & 12 V maintenance free/closed lead batteries, GEL batteries and car batteries from 1,2Ah to 100Ah. Is delivered incl. a bag and manual.

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

The FNIRSI LCR-P1 is a multifunction electronic component tester designed for fast identification and measurement of transistors, diodes, resistors, capacitors, inductors and other electronic components. It features automatic component recognition, a 1.44-inch color display, NEC infrared signal decoding and built-in miswiring protection for safe operation. The device simplifies testing by automatically detecting connected components and displaying key parameters without manual setup. Powered by a 300 mAh rechargeable battery with USB-C charging, it is suitable for workshop, educational and home electronics use.

Elma Laser x360-2 med 2 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 2 stk....

5,7064454803e+12

HIKMICRO ECO-V is a super compact and competitive thermal camera that weighs only 350 grams and has a thermal resolution of 96x96 pixels. ECO-V stores real radiometric thermal images as well as visual image in the built-in memory. The camera has a thermal sensitivity of less than 50 mK and is suitable for troubleshooting, checking or documentation in connection with temperature-related tasks. The camera has a temperature range of -20°C - 550°C, and displays the thermal image on a 2.4" LCD screen.

Elma 315 humidity/thermometer

Standard 32A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs

Elma 2700X spændingstester med åben strømtang Produkt beskrivelse: Med Elma 2700X genopfinder Elma spændingstesteren, endnu engang. Elma 2700X har all...

Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1" to 5" (2.54 cm to 12.7 cm) from the source and red when at the source.Dual SensitivityLED light with 100,000 hour lifeDetects from 90 to 600 V ACRated to CAT IV 600 VDual Levels of DetectionBlue indicates proximity to AC Voltage sourceRed indicates you’re at the sourceOperating temperature 0 deg C to 50 deg CUltra-Bright White LED100,000 hr bulbAAA battery included

Habotest HT651D infrared thermometer guarantees unparalleled precision of measurement. With its help you not only measure the temperature of a specific point, but also check the ambient temperature, dew point and relative humidity. The color display makes working with the device easy and the included K-type thermocouple gives even more possibilities. The thermometer also has an alarm function. It requires a 9V 6F22 battery to power it, which must be purchased separately.

Habotest HT108L digital multimeter is a multifunctional device that will prove useful during electrical work. The product allows you to measure voltage, resistance and many other values. The multimeter has an easy-to-read display that allows you to conveniently read the measurement results, moreover, it is equipped with a flashlight and practical buttons.

Habotest HT108L digital universal multimeter is a handy device that surprises with the enormity of its capabilities. It allows you to measure with high precision, among other things, AC and DC voltage, resistance, continuity or capacitance. It also allows you to test diodes, and thanks to practical buttons you can efficiently select the appropriate function.

The small size of the device (130 x 70 x 23 mm) makes the multimeter fit well in the hand and provides high comfort of use. It is powered by two AAA batteries, which you can easily remove and replace. The soft material housing is pleasant to the touch, plus it provides effective insulation and is drop-resistant.