Instrument - sita 2

Red/black 1000V/12A Kit including 1 red and 1 black silicone test lead 0,75 mm2, 100 cm. Equipped with 4 mm banana plug with protection cap and and test stick with the possibility of conenction on a clip etc. Complies with IEC 61010-1 CAT II 1000V. Technical data: IEC 61010: Cat II 1000V

Neozed DO1 fuse, 13A, 5 pcs.

Elma 6100BT is a rugged true RMS AC/DC mini multimeter equipped with Bluetooth function. The instrument measures current, voltage, frequency, capacitance, resistance and continuity. Furthermore, the instrument provides a custom range for external current clamp, measuring as much as 3000A using the flexible clamp ElmaFlex 430.Using the Bluetooth function and free app, Elma Link, available for both iOS and Android, Elma 6100BT becomes a safe an clever documentation tool. Watch the display directly on your Android/iOS device and perform measurements in safe distance from dangerous voltage. Watch and record all values and trends directly on your phone. Save and attach comments to measurements and share e.g. by mail.Elma 6100BT is equipped with back lit display and bright LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is delivered with test leads, batteries and manual.Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 6100BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 6100BT is equipped with a large, back lit display and has built in LED torch light, data hold, max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, batteries and manual.

Elma DT-125 is a new smart instrument for moisture measurement in building materials such as wood, stone, concrete, aerated concrete, gypsum etc. In accordance to the task, it’s possible to acquire different probes, both for destructive test with holes in the material and non-destructive surface measurement. The instrument is indispensable for the builder, moisture technician, engineer and others who work with renovation and water damage control. Elma DT-125 also measures the air humidity and temperature, and is provided with a large illuminated combi display. You can set wet / dry limit, material selection, automatic calibration, min / max and auto power off function. Instrument comes with built-in needle electrodes incl. batteries and instruction manual. Available as accessory is complete suitcase, incl. extra long needle probes, hammer electrode, depth probe, surface probe and handle extensions.

Patented TwistGuardTM extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurementsNew WearGuardTM lead wire wear indication. Each test lead is covered by two layers of silicone insulation, inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacementDouble insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugsRatings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tipProbes always show correct category rating for tip being usedEnvironmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)Conforms to EN61010-031

Elma Laser x360-4 med 4 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 4 stk....

5,7033174717e+12

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

Standard 16A CEE plug with built-in phase / rotating field tester with LED indication of correct / incorrect installation and lack of phase / neutral / earth. The perfect test tool for all users of CEE plugs

Elma EVSE-200 type 2 adapter Produkt beskrivelse: Elma EVSE-200 adapter aktiverer ladestander, ved at simulere tilslutning af elbil, og bringer målepu...

FNIRSI 2C23T is a compact 3-in-1 portable measuring device that combines a dual-channel oscilloscope, precision multimeter, and signal generator in one lightweight housing. Equipped with a 10 MHz oscilloscope, 50 MS/s sampling rate, and a built-in signal generator with frequencies up to 2 MHz, it is ideal for electronics diagnostics, circuit testing, and field measurements. The 2.8-inch color display ensures clear waveform visualization, while the 3000 mAh rechargeable battery provides up to 8 hours of operation. Its durable ABS housing with silicone protection makes it suitable for both workshop and mobile use.

Elma1500B is a new small and handy tester with 3 Features: - Test voltage 12-690 V AC / DC, 2-pole with LED indication - Analysis Test with both audible and visual indication - Unipolar phase indication The tester has smart fastening testprobes with 19mm spacing to fit directly into the socket and enables one-hand operation. The instrument has no buttons and switches automatically between the different functions so that it can not be error controlled. Elma 1500B uses standard batteries, and for extra security work voltage test function even without batteries. Elma 1500B are in abundance class IP 54 and meet particular IEC 61010-1 CAT IV 300V and CAT III 600V and EN 61243-3. Technical data: Voltage test: 12, 24, 50 and 120, 230, 400 and 690 V AC / DC Frequency: 0-65 Hz Continuity: 0-200 k Voltage: 100-690 V Battery: 2 x 1,5V LR03 (Inclusive) Dimensions: 205x67x27 mm. Weight: 130 g

The FNIRSI DSO-TC4 is a portable 3-in-1 instrument combining a digital oscilloscope, electronic component tester and signal generator in a compact handheld design. It is intended for electronics diagnostics, service work and educational use, where multiple measurement functions are required in a single device. The oscilloscope supports a 10 MHz bandwidth with a 48 MSa/s sampling rate, enabling real-time waveform analysis with sufficient detail for general signal inspection. The integrated signal generator provides 13 predefined waveforms with frequency output up to 50 kHz and adjustable amplitude, allowing simulation of circuit behaviour. The component tester automatically identifies and evaluates diodes, transistors, MOSFETs, resistors and capacitors for rapid fault detection. A 2.8-inch TFT display ensures clear visualization of results, while the 1500 mAh rechargeable battery with USB-C charging supports extended portable operation.

The FNIRSI DSO152 is a compact portable oscilloscope with a 2.8" display, 2.5MS/s sampling rate, 200kHz bandwidth, and ±400V measurement capability. Despite its small size (99 × 68.3 × 19.5 mm), it features automatic parameter settings, a built-in 1,000mAh battery, and a 1kHz test signal source for probe calibration. Lightweight and easy to carry, it is ideal for mobile service, workshop, and educational applications, providing accurate, convenient measurements in a pocket-sized device.

Elma X-Reel is a new smart cable roll with safety test lead. The roll is equipped with a practical shoulder strap and a smart handle, which makes the work with Elma X-reel very simple. Elma X-reel is also equipped with at unique system, which is able to filters out the wire, when using the cable roll. Elma X-Reel er perfect on measuring on earth connections and protection wires, where you normally have to use very long wires to measure continuity. Elma X-reel includes 33 meters 0,75 mm2 black PVC wire. Can be loaded with max 2A. Complies with IEC 61010-1 CAT III 1000V/CAT IV 600V. Technical data: Length: 33m Size: 0,75mm2 Current: max 2A IEC 61010: Cat III 1000V, Cat IV 600V

Ancel AD410 PRO is an advanced diagnostic tool, combining the functions of OBD2 scanner and battery tester in one device. Thanks to its wide range of functions, this device enables comprehensive vehicle diagnostics, both for the condition of the battery and the engine system. The ideal solution for mechanics and vehicle owners who want to have full control over the technical condition of their cars.

VoltAlertTM technology for non-contact voltage detectionAutoVolt automatic AC/DC voltage selectionLow input impedance: helps prevent false readings due to ghost voltageLarge white LED backlight to work in poorly lit areasTrue RMS for accurate measurements on non-linear loadsMeasures 10 A (20 A overload for 30-seconds)Resistance, continuity, frequency and capacitanceMin/Max/Average with elapsed time to record signal fluctuationsCompact ergonomic design for one-handed operationCompatible with optional magnetic hanger (ToolPakTM) for hands free operationCAT III 600 V safety ratedIncludes:4 mm silicone test lead setHolsterUser manual

The FNIRSI 1013D is a 7" portable touchscreen oscilloscope with 2 channels, 100 MHz bandwidth, and 1 GSa/s sampling rate. It features an 800x480 TFT display, automatic one-button signal adjustment, and waveform recording for fast, precise measurements. The built-in 6,000 mAh battery provides around 4 hours of operation. Suitable for electronics repair, workshop use, and DIY projects, it supports analog and digital signal analysis, offering convenience and portability wherever needed.

The Fluke two-pole testers are now more rugged and easier to use than ever before.Fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation.Rugged, high-quality construction is built to last. This includes a heavy duty molded case, a thicker cord with wear indicator, sturdy battery case, and well-fitting and durable probe protector.Enhanced ergonomic design feels good in your hand, is easy to use (even with gloves on) and quick, secure probe docking.A complete family of testers with the features, functions, and price/performance to fit your applications and preferences.SpecificationsVoltage AC/DC 6V - 690VContinuity 0 - 400 kFrequency 0 / 40 - 400 HzPhase rotation 100 V - 690 VResistance measurement Up to 1999 Response Time (LED indicator) < 0.5 s200 k input impedance Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V7k input impedance (with load buttons pressed) Current draw 30 mA @ 230 VSafety rating CAT III 690V/CAT IV 600VIP rating P64SpecificationsPower requirement 2-AA batteriesNet weight 280 gSize (length, width, height 26 x 7 x 3.8 cm

The FNIRSI 2C53P is a portable 3-in-1 measurement device combining a dual-channel oscilloscope, digital multimeter and DDS signal generator in a compact handheld format. It features a 4.3-inch IPS touchscreen with 480×272 resolution for intuitive control and clear waveform display. The oscilloscope offers 50 MHz bandwidth and 250 MSa/s sampling for accurate signal analysis, while the multimeter supports high-precision 19999-count measurements across voltage, current, resistance, capacitance and temperature. A 4000 mAh battery enables portable operation, making it suitable for field, workshop and laboratory use.

The FNIRSI SG-004A is a compact mini signal generator offering professional functionality in a pocket-sized design. It features a 2.4-inch HD backlit display, adjustable brightness, real-time curve viewing, and multi-mode operation. With ≤0.2% measurement accuracy, drop protection, USB-C charging, and up to 24 hours standby, it is ideal for field engineers, technicians, and electronics enthusiasts. The device supports a wide range of signal types and testing tasks, including voltage/current testing, speed simulation, actuator adjustment, and inverter diagnostics, providing reliable and portable performance wherever you need it.

Eurotest XC "AUTO-TEST" multi installations tester is testing the mandatory tests much faster than any other tester on the marked. It has never been easier to test, measure and do documentation - just by pushing one button. FUNCTIONS: Voltage- and frequency // short curcuit current, loop impedance, phase-zero, phase-earth and phase-phase // Is testing all kinds of RCD`s , type AC, A, B, B+ & F, and tripout time and tripout current with a smart test current function // Low (resistance) ohm 7 and 200mA test on equipotential bondings // Insulations test from 50 to 1000V test voltage // 2-and 3-pole earth resistance to earth // specific earth resistance with ro adapter (extra accessory) // earth resistance measurement with 2 clamps (extra accessory) // Phase rotation detector // TRMS leakage- and current measurement (extra accessory) // First Fault leakage current measurement and indicative resistance measurement (IT-system) // memory with unique possibility for building up memory struct

The FNIRSI 1014D 2-in-1 oscilloscope signal generator is a compact digital measurement instrument designed for electronics diagnostics, development, education and repair applications. It integrates a dual-channel oscilloscope with a built-in DDS signal generator, enabling both waveform analysis and signal output within a single device. The oscilloscope provides 100 MHz bandwidth with 1GSa/s sampling and 1 MΩ input impedance for accurate signal capture. A 7-inch 800×480 TFT display ensures clear waveform visualization. Advanced functions include FFT analysis, X-Y mode, auto measurement and cursor tools. Internal memory supports storage of up to 1,000 waveforms and screenshots, with USB export for external processing and documentation. The device supports stable operation across a wide range of electronic testing scenarios.

Nätverkstestsats

Kyoritsu 2300R is the worlds first true RMS AC/DC clamp meter with an open clamp. The instrumentet is able to, due to its narrow clamps, to used everywhere - even in boards where the leads is sitting very close to eachother. Kyoritsu 2300R measures true RMS AC/DC currents up to 100 A and is equipped with data hold, auto shut off, automatical zero-adjustment and non-contact voltage indication. The voltage incication gives an acustiscal signal when the clamp is close to a , wher the voltage is above app. 80V. The instrumentet complies with IEC 61010-1 CAT III 300V and is delivered i a bag incl. batteries and manual. Technical data: Current: 0,1-100A AC/DC Resolution: 0,1 Accuracy: ± 2%+5D Display: 3 1/2 digits Max display: 1049 Clamp size: 10 mm Battery: 2x1,5V LR03 (incl.) Size: 161x40x30 mm Weight: 110 g