The MBT 153 is a heavy-duty temperature sensor that can be used for controlling cooling water and ventilation systems within general industry and marine applications.This temperature sensor is based on a standardized Pt100 or Pt1000 element, which gives a reliable and accurate measurement. On request the MBT 153 can also be delivered with NTC/PTC elements.The sensor is based on a stainless steel housing with a cable, which makes the sensor extremely flexible.The MBT 153 can be combined with a sensor pocket to protect the silicone cable from the media. The MBT 153 has a PVC or silicone cable as standard but it can be delivered with teflon cable on request. •Temperature range -50 to +200°C •Short response times •Pt100 or Pt1000 resistance element •2- or 4-wire connection

EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4" to 1". This program is especially for OEM applications demanding a robust solution and moderate flow rates.

EMC de-couplingplate kit for VLT Micro Drive FC-51.For framesize M1 and M2.Note!Order size must be equal to 24, which is the content in each industrial package

Sensor Pocket 060L327166 from DANFOSS A/S

Valve housing type RLV Press incl. self-sealing nipples. DN15.

Danfoss RA 5062 thermostat. Danfoss offers a complete range of robustly constructed sensors and valves, suitable for practically all types of radiator/convector heating systems and installations.

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss RA-U valve. Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system. Pre-setting valves are available for normal and low flows and for reversed flow

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss Dynamic Valve™ is an innovative two-in-one radiator valve.

Danfoss RAVL thermostat. A range of built-in and remote sensors that fit to older Danfoss RA/V and RA/VL valve bodies, providing a simple way to upgrade older radiator thermostats. The products shown on this site represents a part of Danfoss' extensive

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Angular valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with a pump.

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Danfoss Aveo Institutional sensor element with built-in sensor. Setting range 7-28°C, Frost protection.

Danfoss Aveo Service thermostat with built-in sensor. Setting range 7-28°C, Frost protection, Service gland.

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Angular valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with a pump.

DEVIpipeheat 10 V3, 16m Self limiting with Danish plug

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

DEVIpipeheat 10 V3, 6m Self limiting with Danish plug

Heat conduct compound

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.