Danfoss AME 435 actuator. AMV 435 is an actuator for three point control and AME 435 is an actuator for modulating control. The advanced design incorporates load related 'switch-off' to ensure that neither actuators nor valves are not exposed to overloa

Danfoss 065Z0156 rörmokeritillbehör

Danfoss insulation cap for AB-QM DN20Tailpieces, union connections etc. for AB-QM

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4" to 1". This program is especially for OEM applications demanding a robust solution and moderate flow rates.

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

Danfoss AVTB thermostatic water valves. Self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. The controller has a control valve, thermostatic actuator and handle for temperature

Danfoss ABNM A5 thermic actuator. Danfoss ABN A5 (On/Off, 24/120/230V) and ABNM A5 LIN/LOG (0-10V, 24V AC and DC) are thermic actuators for AB-QM DN10-32 with 5 mm/6.5 mm stroke, plug-in cable and IP54 available as NC and NO.

Danfoss ECL Comfort 310 regulator 230V. The ECL Comfort 310 is an electronic weather compensated temperature controller for use in district heating, central heating and cooling systems. Combined with the intelligent ECL application keys, the controller

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss 065F2034 rörmokeritillbehör

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

For those who want to use cooling and prevent condensation.

Danfoss insulation cap for AB-QM DN32Tailpieces, union connections etc. for AB-QM

Danfoss 003H6239 tryckregulator

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

CCR+ slave unit for CCR2+/CCR3+ system extension, + 16 inlets/outlets

Danfoss insulation cap for AB-QM DN10Tailpieces, union connections etc. for AB-QM

Danfoss AVTB thermostatic water valves. Self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. The controller has a control valve, thermostatic actuator and handle for temperature

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4" to 1". This program is especially for OEM applications demanding a robust solution and moderate flow rates.

Danfoss Aveo Service thermostat with built-in sensor. Setting range 7-28°C, frost protection.