Danfoss - sita 10

Danfoss 082H8059 rörmokeritillbehör

Danfoss RTX valve set. The valve sets are prepared for the control of towel-rails and design radiators. The sets includes a thermostatic valve complementing lock shield valve and a matching sensor. They are available in the colours white and chrome.

Danfoss VM2 20 2-way valve kvs 4,0. 2-way pressure balanced valve designed for long and unproblematic performance in response to the most demanding conditions in systems such as district heating, heating, hot-water service with heat exchanger or storage t

CCR+ slave unit for CCR2+/CCR3+ system extension, + 16 inlets/outlets

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s

Danfoss 003N8142 vvs-ventil Reglerventil

Danfoss 003N8253 vvs-ventil Reglerventil

Danfoss 003Z4001 rörmokeritillbehör

ET 20 M Electronic Multi-Timer Product Description: ET 20 M Electronic Multi-Timer for Coils for Solenoid Valves.

Danfoss AME 20 actuator. AMV 20/23 are actuators for three point control and AME 20/23 are actuators for modulating control, furthermore AMV(E) 23 actuators have safety function. The spring return actuators can be used to provide safety shut off on power

Tough applications, with IP67, 12W ac / 20W dc, IP67

Danfoss 065Z0154 rörmokeritillbehör

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

Danfoss insulation cap for AB-QM DN32Tailpieces, union connections etc. for AB-QM

Danfoss AFP pressure actuator controler. Pressure actuator with control diaphragm and spring for differential pressure setting. Combined with valve type VFG and VFQ it is a self-acting differential pressure controller primarily used in district heating

Danfoss 013G7717 rörmokeritillbehör

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss AVDO Automatic Bypass Control valve. Angled valve design comprising internal thread in inlet and outlet.

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

Danfoss 013G7715 rörmokeritillbehör

Transformer for ECL Comfort 24V

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.