Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss 060-310366 rörmokeritillbehör

Danfoss 087B1184 rörmokeritillbehör

Danfoss 017-436966 rörmokeritillbehör

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Danfoss Aveo Standard thermostat with remote sensor, 2m capillary tube. Setting range 7-26°C, Frost protection, Service gland.

Danfoss 013G5081 rörmokeritillbehör

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss 082F0001 rörmokeritillbehör

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

QTL thermostat for AVQML

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

Danfoss Aveo Institutional sensor element with remote sensor, 2m capillary tube. Setting range 7-26°C, Frost protection.

Nipple bend for radiator screw connection (nickel-plated) 1/2", Nipple bend 90°.

Danfoss RA 5065 thermostat. Danfoss offers a complete range of robustly constructed sensors and valves, suitable for practically all types of radiator/convector heating systems and installations.

ProfiNet (MCA120) product description: For use with FC-102, FC-202 and FC-302 series. REMEMBER kit 130B5612 when used together with A4 enclosure. REMEMBER kit 130B5436 when used together with A5, B1, B2, C1 and C2 enclosures.

Contact house 031E0291 Product description: Accessories and spare parts Technical specifications: Type: 3-pole contact system Application: CS

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

Spare part Service kit EV220 20 EPDM 032U1073 from DANFOSS A/S

Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders (e.g. storage tanks) or heat exchangers in radiator heating systems. Combined with RAV it is intended for temperature control in a mixing loop for hot water service. The controller closes on rising temperature.

QTL is self-acting thermostatic actuator primarily for use for temperature control of small hot water cylinders. Setting range 45-60 degrees.

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

VLT® Micro Drive is a universal frequency converter for the control of AC-motors up to 22kW. It is a small frequency converter with maxium power and operational reliability. VLT® Micro Drive is produced with respect for the evironment and the unit meet the demands i the RoHS-directive. the perfect control for: - industrial applications - HVAC-applications - OEM. Note! VLT® Micro Drive FC-51 is always delivered without a control panel and EMC decoupling-kit. This must be orderet seperately and is available in accesories. For frame size M1, M2 and M3 it applies that the order size must be equal to 6, which is the content in each industrial package

VLT® Micro Drive is a universal frequency converter for the control of AC-motors up to 22kW. It is a small frequency converter with maxium power and operational reliability. VLT® Micro Drive is produced with respect for the evironment and the unit meet the demands i the RoHS-directive. the perfect control for: - industrial applications - HVAC-applications - OEM. Note! VLT® Micro Drive FC-51 is always delivered without a control panel and EMC decoupling-kit. This must be orderet seperately and is available in accesories. For frame size M1, M2 and M3 it applies that the order size must be equal to 6, which is the content in each industrial package

VLT® AutomationDrive is made on a modulized platform, which makes it easy to adjust to any need. With the VLT® AutomationDrive-series, you get unsurpassed operational reliability and an intelligent plug-and-play-technology, that makes it easy to programme and operate the frequency converter.