Danfoss A/S, 003H6905

Union for the seat valves VRB and VRG.

Danfoss VM2 25 2-way valve kvs 6,3. 2-way pressure balanced valve designed for long and unproblematic performance in response to the most demanding conditions in systems such as district heating, heating, hot-water service with heat exchanger or storage t

Pressure transmitter MBS 33 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions. The flexible pressure transmitter programme covers a 4-20 mA output signal, absol

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

DEVIcrimp TM toDEVImat rep.- andassembly line 2 conductorheating mat• 1 piece. 0.5m DSWB 10 black2x1.0mm2 m. Screen• 6 pieces. Db. 0.51,0mm2• 4 pieces. 2.5cm shrink tubing4 / 1.6 Cows 4• 2 pcs. 7.5cm shrink tubing6 / 1.4 thin wall black• 2 pcs. 13cm shrink tubing 9/3IAKT black

The DEVIreg TM 610 is a 10 A electronic IP44 thermostat suitable for many different applicationspurpose, both indoor and outdoor applications. It is equipped with a 2-pin connectorand a wiring sensor for controlling the desired temperature.The thermostat has a knob for adjusting the temperature with a scale of -10 to +50 ° C and oneLED indicator showing the current state (heating, standby or fault).It is water resistant and can be mounted on any ordinary surfaceindoors and outdoors.

Danfoss ReactTM Sensors, Standard, Liquid, Sensor type: Remote Sensor, 8-28°C, RA

Nipple/nipple set with flat gaskets

Danfoss RA-V valve. 2-way seated valve primarily used for heating systems.

CCR3+ controller, return temperature controller and temperature registration, 24V DC, 150 VA

Danfoss 065F0025 rörmokeritillbehör

Thermometer a / b w / dip pocket

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

Danfoss insulation cap for AB-QM DN15Tailpieces, union connections etc. for AB-QM

Danfoss 087B1182 rörmokeritillbehör

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss 087B1181 rörmokeritillbehör

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.