Danfoss - sita 20

On the wall box(EURO) toDEVIreg TM Smartand DEVIreg TMtouch

Coil for soleniod valve

Sensor Pocket 060L327166 from DANFOSS A/S

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res

EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4" to 1". This program is especially for OEM applications demanding a robust solution and moderate flow rates.

Coil for soleniod valve

Danfoss 087B1182 rörmokeritillbehör

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Pressure transmitter MBS 33 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions. The flexible pressure transmitter programme covers a 4-20 mA output signal, absol

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

Tool set for Allen screws and anti-theft, RA 2000.

ProfiNet (MCA120) product description: For use with FC-102, FC-202 and FC-302 series. REMEMBER kit 130B5612 when used together with A4 enclosure. REMEMBER kit 130B5436 when used together with A5, B1, B2, C1 and C2 enclosures.

Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders (e.g. storage tanks) or heat exchangers in radiator heating systems. Combined with RAV it is intended for temperature control in a mixing loop for hot water service. The controller closes on rising temperature.

Danfoss 082F0001 rörmokeritillbehör

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

On the wall box (EURO)w. ELKO frame

Danfoss 003Z4006 rörmokeritillbehör

AVQML PN25 15/4.1 male thread. Made of DZR brass. Globe valve with flow control

Danfoss RTX valve set. The valve sets are prepared for the control of towel-rails and design radiators. The sets includes a thermostatic valve complementing lock shield valve and a matching sensor. They are available in the colours white and chrome.

RT switches are used in general industrial and marine sectors. The RT single pressure switches series consist of a variety of ordinary controls including neutral zone pressure switches, safety pressure switches for steam boiler plant, and gold plated fail

Danfoss KP thermostats are used for regulating, monitoring and alarm systems in industry. The KP series are temperature-operated electric circuit breakers. The thermostats are fitted with a single-pole switch (SPDT), and can control single-phase ac motors

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Danfoss 041E0000 rörmokeritillbehör

Sensor pocket 017-437066 from DANFOSS A/S