Danfoss - sita 16

Valve housing type RLV Press incl. self-sealing nipples. DN15.

Straight valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with pump.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Standard oil nozzle with conical housing for atomizing heating oils in high pressure burners

RA-K + RA-KE middle tube 15x650 mm

TPOne-M, mains powered electronic programmable room thermostat.

Permanent Magnetic coil 018F0091 from DANFOSS A/S

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

Tough applications, with IP67, 12W ac / 20W dc, IP67

Danfoss Aveo Institutional sensor element with built-in sensor. Setting range 7-28°C, Frost protection.

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

QTL thermostat for AVQML

Danfoss insulation cap for MSV-BD Leno DN40This EPP insulation cap offers click-on feature for fast and easy mounting on the valve. It is suitable for temperatures up to 120oC.

Danfoss Thermal actuator for AB-QM DN 10-32. 230 V

Danfoss AB-QM tailpieces. Union connection, 1 pcs.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (5-45 ° C) is primarily used for controlling a lower temperature range, such as frost protection, as well as for cooling, comfort floor heating, total (direct)underfloor heating, ice and snowmelt on the ground, frost protection on roofs, pipe protection etc. The thermostat has a button for adjusting the temperature setting with ascale from 5 ° C to 45 ° C. This type has temperature drop in economy period mode using an external timer.

Accessories for valve sets, type VHX, RAX and RTX Wall rosettes and cover pipes for standard connection

Danfoss RA-KE floor fitting. Manifold assemblies (normal flow, with or without pre-setting) are universal pipe connectors and regulating valves for radiators. An assembly comprises: A radiator valve, a manifold valve, connection pipe and compression fittings.

Heat conduct compound

In the CAS thermostats series, special attention has been given to meeting demands for a high level of enclosure, robust, compact construction and resistance to shock and vibration.The CAS series covers most outdoor as well as indoor application requirements. CAS thermostats are suitable for use in alarm and monitoring systems in factories, diesel plant, compressors, power stations and on board ships. •Temperature ranges: 20°C to 150°C •Low differential (fixed) micro switch •Enclosure IP67. Sturdy and sea water resistant •Robust and compact construction •Resistance to shock and vibrations •Available with all relevant land and marine approvals •Available as 2-step thermostats (see CAS 2-step)

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.