Danfoss - sita 17

Danfoss AMV 435 actuator. AMV 435 is an actuator for three point control and AME 435 is an actuator for modulating control. The advanced design incorporates load related 'switch-off' to ensure that neither actuators nor valves are not exposed to overloa

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.

QTL is self-acting thermostatic actuator primarily for use for temperature control of small hot water cylinders. Setting range 45-60 degrees.

Danfoss RAV thermostat. A range of built-in and remote sensors that fit to older Danfoss RA/V and RA/VL valve bodies, providing a simple way to upgrade older radiator thermostats. The products shown on this site represents a part of Danfoss' extensive p

Danfoss compression fittings. Compression fittings for connecting Danfoss valves with steel and copper tubings.

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVIflex TM 18T (18W / m) heating cable is designed for concrete embedding or similar. both total, accumulating and comfort underfloor heating.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensures a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensure a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensure a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Silencer loop 060-1047 CU.1,5M Product description: Technical specifications: Type: Silencer roller Application: CAS / KP Connection type: Pipe thread Connection size: G 3/8 A Capillary tube length (mm): 1,500 mm Standard connection: ISO 228-1

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

For those who want to extend the wireless signal range.

Danfoss AVTB thermostatic water valves. Self-acting temperature controller used to control the water temperature in hot water tanks, heat exchangers, oil preheaters, etc. The controller has a control valve, thermostatic actuator and handle for temperature

Danfoss TVM-H thermostatic mixing valve. The thermostatic mixing valve TVM-H can be used with different types of storage and instant water heaters for heating applications. It limits and maintains constant levels of mixing temperatures in heating system

Danfoss ECL Comfort A230 application key. Weather compensated or constant flow temperature control of heating systems with sliding return temperature limitation and with / without wind compensation. Weather compensated or constant flow temperature contr

Danfoss 087H3230 rörmokeritillbehör

Service element for replacement on AVTA and AVTB thermostatic valves.

Spare part Service kit EV220 10 EPDM 032U1065 from DANFOSS A/S

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.