Danfoss - sita 15

Spare part Service kit EV220 15 EPDM 032U1071 from DANFOSS A/S

Danfoss ABNM A5 thermic actuator. Danfoss ABN A5 (On/Off, 24/120/230V) and ABNM A5 LIN/LOG (0-10V, 24V AC and DC) are thermic actuators for AB-QM DN10-32 with 5 mm/6.5 mm stroke, plug-in cable and IP54 available as NC and NO.

Danfoss 003Z4002 rörmokeritillbehör

RT controls are used in general industrial and marine sectors. The RT temperature switch series consist of a variety of ordinary room temperature switches and remote sensor temperature switches including neutral zone temperature switches. RT temperature s

In the KPS series, special attention has been given to meeting important demands for a high level of enclosure, a robust, compact construction and resistance to shock and vibration. The KPS range covers most outdoor as well as indoor application requireme

DEVIpipeheat 10 V3, 22m Self limiting with Danish plug

DEVIpipeheat 10 V3, 14m Self limiting with Danish plug

For those who want to use cooling and prevent condensation.

Danfoss 065F2032 rörmokeritillbehör

Danfoss adaptor RAV/RAVL. Adapters for mounting living eco and living connect on RAV or RAVL valves

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

DEVIpipeheat 10 V3, 4m Self limiting with Danish plug

Straight valve housings type RA-G are intended for two-line systems with circulation or for single-line systems with pump.

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss ECL Comfort module. Extension module for ECL Comfort 310. Internal I/O module providing extra input and output signals.

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

Accessories for valve sets, type VHX, RAX and RTX Wall rosettes and cover pipes for standard connection

Insulation rings for AVTB

TPOne-B, battery powered electronic programmable room thermostat.

Danfoss ECL Comfort A260 application key. Weather compensated flow temperature control of heating systems with sliding return temperature limitation for two independent heating circuits.

DEVIcrimp TM toDEVImat rep.- andassembly line 2 conductorheating mat• 1 piece. 0.5m DSWB 10 black2x1.0mm2 m. Screen• 6 pieces. Db. 0.51,0mm2• 4 pieces. 2.5cm shrink tubing4 / 1.6 Cows 4• 2 pcs. 7.5cm shrink tubing6 / 1.4 thin wall black• 2 pcs. 13cm shrink tubing 9/3IAKT black

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensure a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss AVDO Automatic Bypass Control valve. Angled valve design comprising internal thread in inlet and outlet.