Thermal Grizzly CPU-fläktar

High-end thermal paste. Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.

• Designed for Overclocking
• Excellent thermal conductivity
• No curing
• Long-term durability
• No electrical conductivity!

Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus achieving remarkable heat transfer.
 

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

Värmeledande platta, rödbrun (paket om 2 )

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1x Duronaut thermal paste 6g
1x Applicator
1x TG Spatula
1x TG Spatula Pro
 

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

CPU contact frame for LGA 1851 (Intel 200 series). Can help improve cooling performance with better contact between CPU and cooler.

 Included in the package:

• 1x Intel 1851 CPU Contact Frame V1
• 4x Cylinder head screws with 3/8" UNC threads
• 1x 5/64" hex key
• 1x Torx T20 key

Aeronaut thermal grease is the ideal beginner's product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.

• very good thermal conductivity
• long-term durability
• no curing
• no electrical conductivity

Spatelsetet TG Spatula Pro (3-pack) säkerställer en jämn och exakt applicering av kylpasta på CPU:er, optimerat för att möjliggöra mer tryck vid utstrykning.

Dessa spatlar i mjuk plast är utformade för noggrann, jämn applicering av kylpastor med hög till mycket hög viskositet, minskar risken för repor eller ytskador och reagerar inte med metalliska komponenter i kylpastor.

• Praktiskt 3-pack
• Mjuk plast med lägre hårdhet än metallverktyg
• Slevliknande form för hög styvhet vid nedåtriktat tryck
• Kompatibel med Thermal Grizzly Duronaut, Aeronaut, Hydronaut, Kryonaut och Kryonaut Extreme

Hjälper till att uppnå en ren, konsekvent spridning för tillförlitliga resultat med kylpasta.

Flytande metall kylpasta, silverpasta, densitet: 6,29 g/cm³, driftstemperatur: -50 - 200° C, 1 gram

Termisk pasta Thermal Grizzly Duronaut Pro erbjuder utmärkt värmeledningsförmåga, extrem långsiktig stabilitet, elektriskt icke-ledande användning och ingen härdning över tid.

Duronaut Pro är en avancerad termisk pasta utvecklad för gamers, överklockare och krävande industriella kylsystem, med silikonolja och aluminiummikropulver samt zinkoxid-nanopulver.

• Minimerar pump-out-effekten med optimerad partikel form och storlek
• Stödjer tunna appliceringslager för lågt termiskt kontaktmotstånd
• Inkluderar applicator, TG Spatula och TG Spatula Pro
• Innehåll: 2 g

Duronaut Pro är utformad för effektiv värmeöverföring mellan värmekälla och kylare och hjälper till att bibehålla pålitlig kylprestanda över tid.

Värmeledande platta, rödbrun

Värmeledande platta, rödbrun (paket om 2 )

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

With the Thermal Grizzly Minus Pad Advance, the Hamburg-based cooling specialist is expanding its product range with advanced thermal pads. Based on their predecessor, the Minus Pad 8, they have been further developed to significantly improve thermal conductivity.

The Minus Pad Advance is ideal for applications where thermal paste is difficult to apply or where a gap between the heat source and the heat sink needs to be bridged. It is therefore ideal for use with memory chips or voltage converters. It is based on a silicone-based carrier complex and aluminum oxide as a heat transfer medium, thus achieving thermal conductivity similar to thermal paste.

The Minus Pad is available in various dimensions and thicknesses from 0.5 to 3 millimeters. Since it works optimally even with minimal contact pressure and thermal conductivity is barely affected by the thickness, the choice of thickness should simply be tailored to the distance to be bridged.

Termisk pasta, ljusgrå

Kylpasta för processorkylfläns, silver

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermal paste, designed for Overclocking, 14,2 W/m*K thermal conductivity, no curing, 33.84 grams

CPU kontakt tätningsram, röd/svart, svart

Termisk pad Thermal Grizzly Minus Pad extreme 2 levererar enastående värmeledningsförmåga och lågt termiskt gränssnittsmotstånd för högpresterande tillämpningar.

Thermal Grizzly Minus Pad extreme 2 är utformad för att fylla även de minsta gliporna med värmeledande partiklar tack vare en sammansättning av aluminiumoxid, aluminiumhydroxid och aluminiumpulver, vilket främjar optimal värmeöverföring mellan värmekälla och kylare.

• Högpresterande termisk pad för extrema tillämpningar
• Optimerad materialsammansättning för lågt termiskt gränssnittsmotstånd
• Mjuk konsistens anpassar sig väl till kontaktytor
• Elektriskt icke-ledande
• Härdar eller stelnar inte över tid, även vid långvarig användning

Pålitligt gränssnittsmaterial för stabil, effektiv värmeöverföring i krävande byggen.

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

CPU-kontaktram för Intel 13th Intel Raptor Lake och 14th gen Intel Raptor Lake-S, kan hjälpa till att förbättra kylprestanda med bättre kontakt mellan CPU och kylare - se installationsvideon innan du installerar

The Intel High Performance Heatspreader V1 is an upgrade heatspreader for Intel processors. The nickel-plated copper heatspreader has a 207 percent larger, diamond-milled precision surface. This increased surface area compared to the original heatspreader enables maximum heat dissipation for air and water coolers, while the precision milling ensures extremely low surface roughness for the best contact with the heat sink.

The Intel High Performance Heatspreader V1 is compatible with the following processors:

Intel 12th Gen CPUs
Intel 13th Gen CPUs
Intel 14th Gen CPUs (200s)

Scope of delivery

1x Intel High Performance Heatspreader V1
4x pan-head screws UNC thread 3/8"
1x hexagon socket wrench 5/64"
1x angle wrench Torx T20