LK - sita 3

empty consumer unit - PME 150-s - flush mounting - for pin connection

empty consumer unit - PGE150-14 - white

mounting plate - light grey - for UM-s and UM-I meter board

Fuse holder D02 3P to the meter panel type UM-p and p-PME150. Used for example for security classification.

Fitting for horizontal connection of 2 pcs. meter boards type UM or two paragraphs. panelboards type UG150.

Brackets for vertical interconnection of the meter panel type UM with panelboard type UG150.

Panelboard UG150-6, white, for surface mounting on the wall. UG150-6 have 1 row seating 6 modules of 36 mm. Dimensions 250 mm (W) x 260 (H) x 101 mm (D). Adhesive numbers and symbols to label the panel components included. Lid ordered separately. UG150 final panel can be built together with each other, both horizontally and vertically, and with measuring grids of the type UM.

protective cover - white - for IM box

terminal block - 4 conductors - maximum 4..25 mm2

door - with window - with lock - for IM (63A)

front cover - for U and S type enclosure

Ground Terminal for switch cabinets of type IM for flush, outdoor installation. The ground terminal has 4 terminals for connection of 6-25 mm2 Cu or Al 16-25 mm2. Using Al-line use only solid wire.

front cover - light grey - for UG18-150

Panelboard UG150-24, white, for surface mounting on the wall. UG150-18 has 4 rows seating 6 modules of 36 mm on each row, 24 modules in total. Dimensions 250 mm (W) x 710 (H) x 101 mm (D). Adhesive numbers and symbols to label the panel components included. Lid ordered separately. UG150 final panel can be built together with each other, both horizontally and vertically, and with measuring grids of the type UM.

Front doors, white, to PGE150-21 panelboard. The door can be hinged on the right or left side. Decorative caps included.

spare fuse - 1.0 A - 250 V - slow

Acti9 D01 fuse switch, 3P + N, 16A, 400V. Group switch to the fuses of the type D01. Can also be used as isolator. The unit is 72 mm wide and mounted easily and quickly with clip on DIN rail. Supplied without fuses

Loopwire 4 mm2 for # pole+N Blue

Form plier. Range of product: LK. Product or component type: plier - accessory / separate part. Category: installation accessory. Quantity per set: set of 1.

cover - light grey - for UG6-150

LK support bracket for IM-meteringbox adjustable inside hollow wall

Actassi mounting box Softline 212 module 4xfiber, white

IHC Control input 24 V DC 24mA with 16 inputs. Used to collect the signals from the low-current switches, such as pressure control relatives, thermostats, and the like. To IHC system can be considered a low voltage system, it is a requirement that the used switches are insulated to double-insulation (8 mm creepage distance) relative to the 230 / 400V network. It is possible to place the input module 24 both centrally at the Controller and a decentralized, distributed in the installation.

fuse holder - GA -1 switch - 13 A - black

blanking cover - light grey - for dimming of 2 M36 units