The Wiser radiator thermostat is used to regulate the temperature in rooms with water-borne radiators via the Wiser gateway. It provides the opportunity to connect the temperature with scenarios, automations and timetables in Wiserappen. It also allows you to boost the temperature up or down manually.

The thermostat uses integrated temperature sensors to control the flow of water through a radiator, thereby regulating the temperature in a room. The target temperature and switching times are set in the Wiser Home app. The top of the thermostat head can be turned in both directions, so that you can lower or raise (boost) the temperature locally. For how long is set in the app. If several thermostats are placed in the same room, they are automatically linked together in a thermostat group and work together via the app.

Cover, white, for blinding 6 pcs. M36 devices. The cover fits the group and meter boards UG150, PGE150, PGSE150, PME150, PFE150, UF150 and UM p.

Loopwire 4 mm2 for 3 pole+N Blue

Surface mounted housing for ARGUS Presence, white

Casing cover, gray, for the protection of IM meter by creating the outside of the mounting wall or partial counter-bore. Fitted with self-tapping screws.

spare fuse - 1.6 A - 250 V - medium slow

The Wiser water leakage sensor detects liquids and notify you upon detection on the Wiser app. The sensor is equipped with a siren that emits sound of up to 70 dB while at the same time notifying, when the leakage sensor is in contact with liquids. The sensor can be placed anywhere with a risk of waterleakage, such as under the dishwasher, in the washing room or any other room with a risk of waterleaks. The water leakage sensor is equipped with two contact plates that are activated when water or other liquid moves between the contact plates. The Wiser water leakage sensor is powered by two AAA batteries.

IHC Control input 24 V DC 3mA with 16 inputs. Used to collect the signals from the low-current contacts with low contact resistance, for example. alarm PIR, thermostats, magnetic switches and other signal generators with long lasting finish functions. Note! OPUS / FUGA PIR can not be used for this input module. To IHC system can be considered a low voltage system, it is a requirement that the used switches are insulated to double insulation (8 mm creepage distance) relative to the 230 / 400V network. It is possible to place the input module 24/3 both central controller and by a decentralized, distributed in the installation.

Loopwire 4 mm2 for # pole+N Blue

Rosette material ceiling and wall box accessory Super magnet finder

The Wiser wireless Temperature & Humidity combines two sensors within one device. The sensor provides feedback directly to the Wiser Gateway regarding the surrounding temperature and humidity levels from where the sensor is installed. The sensor provides what is needed to maintain a nice indoor climate or trigger automations based on temperature or humidity level. It is powered by CR2450 battery.

This metal shelf in 1U height, depth 250mm, for maximum weight 15 Kg. It is equipped with 1 Quick Fix function on both sides to allow a simple, quick fixing position.

fuse holder - GA -1 switch - 10 A - red

IHC Control Output 400 V AC 8X10A with 8 outputs. Used for coupling of 8 pieces. 230 V a.c. loads controlled by IHC system.

Actassi Power Panel 8 x 2 pole with ground, with switch for mounting in a 19 rack systems 1HE. Used for supplying power to active devices in rackskabek. Supplied with Quick Fix, which allows fast clamping of the panel and has lableholder.

LK FUGA cover for telephone terminals 3-pole, 1 module. Used for signal from public telephone to landlines or ADSL modem. max. 3 x Ø0,5 mm per conductor. Insulation. Always montagedorn 508V0001.

Panelboard UG150-12, white, for surface mounting on the wall. UG150-12 has 2 rows of seating 6 modules of 36 mm on each row, 12 modules in total. Dimensions 250 mm (W) x 410 (H) x 101 mm (D). Adhesive numbers and symbols to label the panel components included. Lid ordered separately. UG150 final panel can be built together with each other, both horizontally and vertically, and with measuring grids of the type UM.

Fitting for horizontal connection of 2 pcs. meter boards type UM or two paragraphs. panelboards type UG150.

terminal block - 4 conductors - maximum 4..25 mm2

branching piece - ZERO or earth - 4x16 mm2 + 16x6 mm2 cable

Meter board UM's white to pin connection. UM-p panel is intended for surface mounting on the wall. Can be combined horizontally or vertically with panelboard type UG.

Front doors, white, to PGE150-21 panelboard. The door can be hinged on the right or left side. Decorative caps included.

cover - light grey - for UG6-150

front cover - light grey - for UG18-150

empty consumer unit - PGE150-14 - white