jumper - 3-pole + N - 16 A - black

adhesive pad softline - wireless - 1 module - silver

Fuse holder D02 three poles to meter cabinet type IM-s (cabinet for recessed outdoor installation.) Can be used for tariff protection.

front cover - light grey - for UG18-150

Front cover panelboards type UG6 and UGL6 (previous series).

Brackets for vertical interconnection of the meter panel type UM with panelboard type UG150.

Front doors, white, without reading pane. Suitable for outdoor, recessed meter cabinet. Packing strip included.

The Wiser Door/Window sensor provides status to your Wiser system regarding open or closed windows and doors. Configuration is made possible by connecting the sensor to the Wiser Gateway with your Wiser app. The Door/Window sensor can be used on access doors to provide you a push message when the door is opened. This provides families with children an opportunity to receive a message when the child has safely arrived at home from school. Or the sensor can be used to control a light also connected to the system so that the light turns on when the door is opened after the sun has set. At low power you will be notified on your Wiser app. The device is powered by a CR2450 battery.

fuse holder - GA -1 switch - 13 A - black

Short-circuits to the switch cabinets of the type FM-S, IM-S, PM150, UMS-PME150 s and UMS ie. Map the officer put in the meter socket before installing or changing the meter and provide protection against burns on contact with the pins.

Front doors, anthracite, without the reading pane. Suitable for outdoor, recessed meter cabinet. Packing strip included.

Meter Socket for switch cabinets of the type IM-S and FM p.

Gauge Plate UM-l, light gray, to the pipe connection. UM-l Plate is intended for surface mounting on the wall. Can be combined horizontally or vertically with panelboard type UG.

Casing cover, gray, for the protection of IM meter by creating the outside of the mounting wall or partial counter-bore. Fitted with self-tapping screws.

LK - Splice Box is a small and tiny steel-encased boxfor extending cables that are short or connecting any precabledmodules. The box maintains a Class D or Class Eperformance of an installation. There is no measurabledifference in the cable performance. Shielding continuity isensured through a steel strain relief that guarantees full EMCperformance.

This Actassi enclosure is a flat-pack wall-mounted product dismounted in 1 package made from welded sheet steel, powder-painted, leathergrain finish, RAL 7035 light grey epoxy-polyester. The enclosure is made up of a body, one pair of 19-inch fixed uprights and a Securit glass transparent door with key no. 333. The dimensions of this space saving enclosure are 752mm in height (or 15U), 600mm in width and 600mm in depth.

IHC Control input 24 V DC 24mA with 16 inputs. Used to collect the signals from the low-current switches, such as pressure control relatives, thermostats, and the like. To IHC system can be considered a low voltage system, it is a requirement that the used switches are insulated to double-insulation (8 mm creepage distance) relative to the 230 / 400V network. It is possible to place the input module 24 both centrally at the Controller and a decentralized, distributed in the installation.

Front cover, white for panelboard UG150-18.

blanking cover - light grey - for dimming of 2 M36 units

Hinged cover, is white, the final panel of the type UG150-12, UG150-18 and UG150-24. The lid covers 6 pcs. M36 devices.

gasket - middle - for UG 150 boards

Front cover panelboards type UG18 and UGL18 (previous series).

Fitting for horizontal connection of 2 pcs. meter boards type UM or two paragraphs. panelboards type UG150.

Panelboard UG150-6, light gray, for surface mounting on the wall. UG150-6 have 1 row seating 6 modules of 36 mm. Dimensions 250 mm (W) x 260 (H) x 101 mm (D). Adhesive numbers and symbols to label the panel components included. Lid ordered separately. UG150 final panel can be built together with each other, both horizontally and vertically, and with measuring grids of the type UM.

Fuse holder D02 3P to the meter panel type UM-p and p-PME150. Used for example for security classification.