Golvvärme - sita 4

Pettinaroli Energy saving thermo-electric actuator 1w 230v with adapte

Energy saving thermo-electric actuator 1W, 230V, with adapter.

254,00 kr (203,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth Straight joint 16 mm pex

Fittting for Roth pipe and manifold

123,00 kr (98,40 kr)

Leverantör, 2-3 vardagar leveranstid

Roth heat distribution plate for universalplate 16 mm

Roth heat distribution plate for chipboard board and Universalplate EPS 30. For 16 mm pipe

189,00 kr (151,20 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating manifold 5 slings

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

2 026,00 kr (1 620,80 kr)

Leverantör, 3-4 vardagar leveranstid

Danfoss floor heating manifold 6+6 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

2 833,00 kr (2 266,40 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating unit GVU 4 slings

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

5 639,00 kr (4 511,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth floor heating shunt with a thermostatic valve plus an a

Used on Roth manifold

6 356,00 kr (5 084,80 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss icon radio module

Required module for those who want to have a wireless systemFeatures Radio module• Required module• Sends and receives wireless signals between room thermostats and Master Controller

1 045,00 kr (836,00 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Thermostatic head with embedding remote liquid sensor for m

Thermostatic head with embedding remote liquid sensor (107LKIT) or remote liquid sensor (107LD). For minikit.

736,00 kr (588,80 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss fhv-r

Danfoss FHV-R. The FHV-R self-acting floor heating temperature limiter valve provides temperature control of floor heating circuits using FJVR return temperature limiter. The valve is designed to be built into a solid or partition wall, making only the ro

1 080,00 kr (864,00 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Headwork for 7035tem

Headwork for 7035TEM.

344,00 kr (275,20 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor vario plus manifold w. valve ls 6x 3/4 euro

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

2 555,00 kr (2 044,00 kr)

Leverantör, 3-4 vardagar leveranstid

Danfoss floor heating manifold 2+2 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

1 483,00 kr (1 186,40 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss floor heating manifold 5+5 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

2 489,00 kr (1 991,20 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating manifold 8 slings with flowmeter

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

3 398,00 kr (2 718,40 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor vario plus manifold kit k1

Basic package Uponor pro

1 173,00 kr (938,40 kr)

Leverantör, 2-3 vardagar leveranstid

Roth Touchline SL complete wireless heating package, 5 rooms

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

16 474,00 kr (13 179,20 kr)

Leverantör, 3-4 vardagar leveranstid

Uponor vario plus manifold w. valve ls 1x

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

546,00 kr (436,80 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss floor heating manifold 12+12 SSM with flowmeter

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

9 389,00 kr (7 511,20 kr)

Beställningsvara, 8-9 vardagar leveranstid

Salus Floor heating unit GVU 3 slings

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

5 398,00 kr (4 318,40 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Manifold system 1x3/4 in- and outlet incl brackets 20 mm fittings and end pieces 5 outlets

Complete manifold system, in- and outlet, incl. brackets, 20 mm fittings and end pieces. 5 outlets.

2 852,00 kr (2 281,60 kr)

Beställningsvara - leveranstid kan ej upplysas

Danfoss twa-v thermal actuator 24v nc

Danfoss 088H3120 rörmokeritillbehör

599,00 kr (479,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth shuntunit for 4 circuits

Complete shunt

5 610,00 kr (4 488,00 kr)

Leverantör, 3-4 vardagar leveranstid

Danfoss floor heating manifold 10+10 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

4 546,00 kr (3 636,80 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss floor heating manifold 9+9 SSM

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

4 116,00 kr (3 292,80 kr)

Leverantör, 2-3 vardagar leveranstid

Måndag-Fredag:	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss