Golvvärme - sita 2

For those who want to set the desired temperature and see current temperature.Features wireless display thermostats• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

Danfoss Zigbee Repeater, 230V/wireless. Used as a network amplifier between the Zigbee gateway and wireless devices. Compatible with Danfoss AllyTM, Danfoss IconTM and 3rd party Zigbee 3.0 systems.

Roth Touchline standard rumstermostat används till Roth Touchline kontrollenheter.

Roth actuator 230V with 2 m. cable. Used on Roth manifolds, shunt units, Minishunt etc.

230 wireless room thermostat for mounting in wall box, for Salus iT600 Heating System. Colour: White.

For Roth Climacomfort

Danfoss Icon2 Antenn

Salus Shunt GVS is equipped with a full electronic circulation pump, with a capacity for supplying 1 - 16 floor heating circuits.

Roth thermostat for Roth shunt 5 - 49°C.

Wireless actuator for radiator valve with 30mm nut and adapter for RA valve for Salus iT600 heating system

Pre-paired set for 1 circuit underfloor heating incl. Quantum thermostat.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Uponor Smatrix Wave controller Pulse X-265 6X wireless radiant heating/cooling controller a Uponor Smatrix Wave Pulse system supports up to 4 controller not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: Autobalancing eletronic control supports up to 6 room thermostats supports up to 8 actuators (24V) heating/cooling function switched by contact sensing input or in public TH pump relay boiler relay valve and pump exercise overload protection combines underfloor heating/cooling and ceiling cooling control Uponor Smatrix com Pulse R-208 connectivity via RJ45 cableOptions: control and configuration via Uponor Smatrix Pulse app, remote control and smart home integration via Uponor SmatrixCom Pulse R-208 additional 6 channels and actuator outputs (24V) via Uponor Smatrix Wave slave module Pulse M-262 6X cabinet or wall-mounted installation (DIN rail or screw holes)Content: Uponor Smatrix Wave controller Pulse X-265 6X antenna first step instructions safety instructions mounting material conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: Class II IP20 color: white

Temperature sensor Uponor 20-55°C

Advanced model, 230V, 15 circuits. The Advanced model allows for floor cooling as well as control of supply temperature etc. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss TWA-K thermal actuator 24V NC. The thermal actuator TWA-K range is used with electrical on/off-controls to activate Heimeier, MNG and Oventrop valves with M30×1.5 connections. Other valves and floor heating manifolds with M30×1.5 connections may a

Uponor Smatrix Wave thermostat standard T-165 pod

Pre-assembled linear manifold with micrometric manoeuvre, with thermostatic option or electrical control, for return pipes. Compression ends. Without fittings. 4 outlets.

Devi fitting

Wireless room thermostat in white high gloss with display with integrated measurement of relative humidity.

Uponor thermostat T-23 230 V.

The THB23031 is an auto balancing actuator that is used to provide automatic balancing of your underfloor heating circuits. It has two temperature sensors that are connected to the UFH flow and return pipes (inlet and outlet of the UFH manifold). It will continuosly measure the temperatures and adjust the actuator position to maintain the correct temparatur differential between the manifold flow and return pipes (Delta T). This product has an IP54 rating means that the produkt will be protected against contamination from limited amounts of dust and other particles. Additionally, it will be protected from water sprays from all directions. ITG Dresden have confirmed that the Salus THB actuator is equivalent to the hydraulic balancing. In co-operation with ITG Dresden, The Salus THB actuator has been tested and improved. During independent testing it was confirmed that the installation of the Salus THB system in existing underfloor heating system will achieve the same results as a conventional balancing.

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Underfloor heating unit with shunt and manifold 1 sling. Incl. 20 mm nut connection for pex with Euroconus.

Wireless Thermostat with knob