Golvvärme - sita 5

Pre-assembled linear manifold with incorporated lockshield valve. Micrometric regulation. Compression ends. Without fittings. Yellow. 5 outlets.

Danfoss FHM-C2 prefabricated floor heating shunt for regulating the flow temperature in water-borne floor heating systems. With Danfoss Icon floor heating control and expansion module, the flow temperature can be regulated electronically according to the heating requirement in the home.

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Used on Roth manifold

Used for floorheating systems

Used for floorheating systems

Roth Clima Comfort FLOW is a fibre-reinforced, cement-based, selflevelling compound specifically designed for laying together with Roth Clima Comfort system panels or Roth Compact System.

Smart Home RE600 is a repeater that connects wirelessly to your Universal Gateway so it becomes an integral part of your Smart Home system. The RE600 can be used if you have an area in the house where there is a bad signal from your Universal Gateway, or if the range is insufficient.

Insulation for Danfoss manifold FHF and FH-ME

Complete insulation for Roth shunt

Used on Roth manifold

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

24 V Wiring Centre for iT600 Underfloor Heating system

Danfos Link HC master regulator 10. Wireless temperature control – all around the house. Danfoss Link is intelligent and wireless communication technology on the inside and stylish on the outside with its timeless design. For total control of your ind

Insulated bace module with stainless floor heating manifold incl. Drain, air screw and 20mm connector. Rødgod distributors for domestic water incl. 15mm connector. The base modules have universal adaptation, so they fit the market's well-known brands with easy adjustment. Unique for SALUS base module. Connection at the top from right to left KV Cold water-VV Hot water-VF Heating forward-VR Heating return.Insulated distributors and pipes according to DS452The underfloor heating control is mounted directly on the bottom module DIN.

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

For those who want to use demand based supply temperature.Features Thermal actuator• Special actuator for demand based supply temperature functionality• IP54, protected against dust and splashing water

Cable for ABNM A5 1 meter, halogen free (0-10V). REMEMBER 406848800 AND 460947976

Adapters for actuators. For mounting actuators on Wirsbo (TA) manifolds

Used on Giacomini manifold

Multibox for 1 circuit heating systems

Used for floorheating systems

Adapters for actuators. For mounting actuators on Tesa, Frese, Honeywell, Cazzaniga, Wavin manifolds