Golvvärme - sita 12

Adapters for actuators. For mounting actuators on Wirsbo (TA) manifolds

Wiring centre extension for Salus iT600 gulvarmesystem.

Key for nuts tightening. For Art. 3015, 3625, BI-219 and BI-220.

EXTENSION TO MIDISHUNT, 2 CIRCUITS, 3/4 MANIFOLD, SUPPLY AND RETURN BAR, INCL. 20/16 FITTINGS

Complete shunt

DEVIpipeheat 10 V3, 19m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Salus under floor heating system paired and ready for use - 7 zones.

Aluminum 0.5 mm. Groove for Uponor pePEX Q&E pipe 20 x 2 mm. Length 1150 mm, width 280 mm. 2 bend guides with 190 mm, 390 mm and 570 mm spacing respectively. Material consumption approx. 2.5 pcs/m2.

Used for floorheating systems

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Fittting for Roth pipe and manifold

Danfoss compression fittings for RA-N 15, RA-FN 15, RA-U/UN 15, RA 15/6T, RA 15/6TB, RTD 15, RLV 15

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Trådlös rumstermostat och telestat används tillsammans med Wavin Sentio styrenheten för reglering av rumstemperaturen i golvvärmeanläggningar. On/off-modell med tryckknappsstyrning.

Wavins rumstermostat AHC 9000 kopplas till Wavins AHC 9000 styrenhet, som gör det möjligt att styra alla rumstermostater på en gång, eller bara styra varje enskild individuellt.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Pre-assembled linear manifold with micrometric manoeuvre, with thermostatic option or electrical control, for return pipes. Compression ends. Without fittings. 3 outlets.

Used for floorheating systems

Complete insulation for Roth shuntunit

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Used with Roth Project room thermostat and controller.