Golvvärme - sita 8

Danfoss floorheating fhf-e

Danfoss floorheating FHF-E. End-pieces, brackets and other accessories for the FHF manifold series. End Cap.

138,00 kr (110,40 kr)

Leverantör, 3-4 vardagar leveranstid

Danfoss fhm-c2 shunt

Danfoss FHM-C2 prefabricated floor heating shunt for regulating the flow temperature in water-borne floor heating systems. With Danfoss Icon floor heating control and expansion module, the flow temperature can be regulated electronically according to the heating requirement in the home.

5 875,00 kr (4 700,00 kr)

Leverantör, 3-4 vardagar leveranstid

Roth supply valve for shunt unit 1/2"

Roth supply valve for shuntunit as spare part, 1/2" with nut.

216,00 kr (172,80 kr)

Beställningsvara - leveranstid kan ej upplysas

Salus Control box wireless 8 zones KL08RF

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

1 931,00 kr (1 544,80 kr)

Leverantör, 3-4 vardagar leveranstid

Roth Insulation for shunt

Complete insulation for Roth shunt

741,00 kr (592,80 kr)

Leverantör, 3-4 vardagar leveranstid

Uponor vario plus manifold q&e w. valve ls 3x q&e 20x2.0

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

1 128,00 kr (902,40 kr)

Beställningsvara, 14-15 vardagar leveranstid

Pettinaroli radiator valve 12 with pre-setting device

Straight radiator valve 12, with thermostatic option. Female thread. Nickel plated. With pre-setting device.

243,00 kr (194,40 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss ball valve set 1"

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

551,00 kr (440,80 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating manifold 7 slings with flowmeter

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

3 174,00 kr (2 539,20 kr)

Leverantör, 2-3 vardagar leveranstid

Roth touchline thermostat analog

Used in Roth Touchline floorheating system

1 901,00 kr (1 520,80 kr)

Beställningsvara - leveranstid kan ej upplysas

Roth floor heating shunt with a thermostatic valve plus an a

Used on Roth manifold

8 158,00 kr (6 526,40 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating manifold 11 slings with flowmeter

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

4 647,00 kr (3 717,60 kr)

Leverantör, 2-3 vardagar leveranstid

Danfoss Devipipeheat 10 v3 8m

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

1 465,00 kr (1 172,00 kr)

Leverantör, 2-3 vardagar leveranstid

Golvvärme - Pettinaroli Linear manifold 1x3/4/18 with thermostatic option or electrical control for return pipes compression ends without fittings 3 outlets - 7035TEM-008-03

Pettinaroli Linear manifold 1x3/4/18 with thermostatic option or electrical control for return pipes compression ends without fittings 3 outlets

Pre-assembled linear manifold with micrometric manoeuvre, with thermostatic option or electrical control, for return pipes. Compression ends. Without fittings. 3 outlets.

725,00 kr (580,00 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Linear manifold 1x3/4/18 with incorporated lockshield valve 3 outlets

Pre-assembled linear manifold with incorporated lockshield valve. Micrometric regulation. Compression ends. Without fittings. Yellow. 3 outlets.

531,00 kr (424,80 kr)

Leverantör, 2-3 vardagar leveranstid

Roth push connection for 20 mm x 3/4" pipe

Used between floorheating pipe and Roth manifold.

140,00 kr (112,00 kr)

Leverantör, 2-3 vardagar leveranstid

Salus underfloor heating manifold 4 slings with flowmeter

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 "thread for hose. Inlet and return pipe connection is 1 "thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ", for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

1 693,00 kr (1 354,40 kr)

Leverantör, 3-4 vardagar leveranstid

Salus Paired floor heating 2 zones FG-2

Salus under floor heating system paired and ready for use - 2 zones.

3 423,00 kr (2 738,40 kr)

Leverantör, 3-4 vardagar leveranstid

Uponor fluvia t thermostat w. sleeve push-23-c

Temperature sensor Uponor 20-55°C

1 344,00 kr (1 075,20 kr)

Leverantör, 2-3 vardagar leveranstid

Pettinaroli Key for nuts tightening

Key for nuts tightening. For Art. 3015, 3625, BI-219 and BI-220.

529,00 kr (423,20 kr)

Leverantör, 2-3 vardagar leveranstid

Uponor vario compression adapter pex 17 x 2 mm x 34 euro

Uponor 1065286 rörmokeritillbehör Komprimeringsplugg

80,00 kr (64,00 kr)

Leverantör, 3-4 vardagar leveranstid

Roth fh manifold unit - 9 with jig

Used for floorheating systems

4 247,00 kr (3 397,60 kr)

Leverantör, 2-3 vardagar leveranstid

Salus Floor heating manifold 3 slings

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

1 295,00 kr (1 036,00 kr)

Leverantör, 3-4 vardagar leveranstid

Salus Floor heating manifold 6 slings

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

2 280,00 kr (1 824,00 kr)

Leverantör, 3-4 vardagar leveranstid

Salus Floor heating manifold 12 slings

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

4 342,00 kr (3 473,60 kr)

Leverantör, 2-3 vardagar leveranstid

Måndag-Fredag:	09.00 - 15.00
Lördag, Söndag & danska helgdagar:	Stängt
Lunchstängt:	12.00 - 13.00

Kontakta oss