Golvvärme - sita 11

Used on Roth manifold

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

Used for floorheating systems

Uponor Smatrix sensor floor/remote S-1XX

Tool for sparepart

Pettinaroli DIRECT - wired control system for underfloor heating. 6 zones. 24V

Multibox is used for decentralized control of floor or wall heating systems or combined floor/radiator heating systems. For out-of-true installation offsetting up to 6° on each side. Cover with concealed screw connection. Models in white or chrome. Adjustable fitting for all wall structures, 30 mm depth compensation

Devi fitting

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Fittting for Roth pipe and manifold

Tool for attaching pipe clips to floor heating pipes on insulation. Used with Unite pipe clips.

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Uponor 1013426 rörmokeritillbehör Komprimeringsplugg

Used for floorheating systems

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Uponor Smatrix Wave slave module Pulse M-262 6X 6 channel slave module that expands a Uponor Smatrix Wave controller Pulse X-265 6X not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: click-in installation no additional wiring needed supports up to 6 room thermostats supports up to 6 actuators (24V) electronic control conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: IP20 color: white

22 mm Floor chipboard with milled out grooves. Thereare tongues and grooves on all edges of the board.return boards for the Universal Chipboard System donot exist. The bent turns are milled out when the boardis placed. Size: 1800x600x22 mm

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Insulation kit Uponor for floor distributor.

Valve insert for thermostatic valve

Used for floorheating systems

Adapters for actuators. For mounting actuators on valves Danfoss RAV/FJVR.

Roth Compact® Primer is a cement-based, fibre-reinforced, highly flexible primer that ensures good adhesion between Roth Compact® System products and subsequent products, such as any type of tile adhesive or self-levelling screeds. Roth Compact® Primer develops its strength quickly so that subsequent work can be carried out after just 3 hours.

Extension for Roth ShuntUnit