Danfoss - sita 22

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EV220B 15-50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless steel ensures that a broad variety of application can be covered. Built-in pilot filter as standard, adj

Danfoss RA-V valve. 2-way seated valve primarily used for heating systems.

Union for the seat valves VRB and VRG.

DEVIpipeheat 10 V3, 19m Self limiting with Danish plug

DEVIpipeheat 10 V3, 12m Self limiting with Danish plug

DEVItronic TM dehumidifiers are the perfect solution to avoidproblems with condensation in shielded electrical installations such as switchboards and control cabinets.DEVItronic TM solves moisture and condensation problems by increasing the temperature a few degrees abovethe ambient temperature.DEVItronic TM has a large surface and a low surface temperature, which ensures thatthe heater does not cause damage to plastic parts and cabinets.

EtherNet IP (MCA121) Product Description: For use with the FC-102, FC-202, and FC-302 series. REMEMBER kit 130B5612 when used with A4 enclosure. REMEMBER kit 130B5436 when used with A5, B1, B2, C1 and C2 enclosures.

Danfoss 087B1181 rörmokeritillbehör

Danfoss AB-QM tailpieces. Union connection, 1 pcs.

Danfoss 003L3531 termostater

Demanding applications, with IP67, for valve range B, 10W ac / 18W dc, IP67

Diving tube pocket 182 mm for AVTB / RAVI.

Danfoss compression fittings. Couplings, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss compression fittings. Couplings, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss 087H3800 rörmokeritillbehör

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss compression fittings. Couplings, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

The most commonly used bus-option, secures effective communication via Profibus.- Supports all major PLC-suplliers- Compatible with future versions- Simpel installation via plug 'n' play- Advanced diagnostic- and parameterfunctions- Autoconfiguration of processdata via GSD-file- Non-cyclic parameter handeling with PROFIBUS DP V1, PROFIdrive or Danfoss FC-profile status machines, PROFIBUS DP V1, master class 1 and 2.

Danfoss 003Z4041 rörmokeritillbehör

Danfoss VRB2 25 2-way seated valve kvs 10. 2-way seated valve with logarithmic characteristic which provides a high quality cost effective solution for most hot water and chilled water applications.

EV210B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV210B is a real robust valve program with high performance and can be used in all kind of tough working conditions.

CCR3+ controller, return temperature controller and temperature registration, 24V DC, 150 VA

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss ReactTM Sensors, Standard, Liquid, Sensor type: Built-in sensor, 8-28°C, M30x1.5